Ridgid BTH-9 Manual

Ridgid Ikke kategoriseret BTH-9

Læs gratis den danske manual til Ridgid BTH-9 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Ridgid BTH-9, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
Pipe Stand User Guide
WARNING
Read the warnings and instructions for all equip-
ment being used before operating this tool to reduce
the risk of serious personal injury.
•Properly support pipe. Failure to properly support pipe
can cause stand tipping, falling pipe and serious injury.
•Use appropriate safety equipment. Always wear prop-
er eye and foot protection. Dust mask, face shield,
hearing protection or other equipment may be needed to
reduce the risk of injury.
If you have any question concerning this RIDGID ®product:
– Contact your local RIDGID distributor.
– Visit www.RIDGID.com or www.RIDGID.eu to find your
local RIDGID contact point.
– Contact RIDGID Technical Services Department at rtctech-
services@emerson.com, or in the U.S. and Canada call
(800) 519-3456.
Description
RIDGID®Pipe Stands are used to support pipe for a variety of
uses. See the product label for specifications or consult the
RIDGID catalog.
Pipe Stand User Guide
Figure 1 – RIDGID Pipe Stands
Inspection/Maintenance
Clean the stand to aid inspection and improve control. Inspect
the stand before each use for proper assembly, wear, damage,
modification or other issues that could affect safe use. Install
any required parts, such as the hand screw. If any problems are
found, do not use until corrected.
Lubricate all moving parts/joints as needed with light lubricat-
ing oil. Wipe up excess oil.
Set Up/Operation
1. Make sure all equipment is inspected and set up per its
instructions.
2. Locate a clear, level, stable location for the stand, other
equipment and the operator.
3. For folding stands, make sure the legs are fully open and
the feet sit squarely on the floor.
4. If equipped with rollers, make sure that the rollers are
properly adjusted for pipe size. Ball transfer heads can be
used with the VJ and VF stands. Make sure fasteners are
secure.
5. Height Adjustment:
Do not exceed stand rating.
VJ, CJ, RJ and VF stands are equipped with a lock ring:
Securely grip head assembly. Loosen hand screw. Raise
lock ring to disengage elevator tube. Move head assem-
bly to desired height and lower lock ring to engage eleva-
tor tube. Do not raise the elevator tube past the hand
screw. Make sure lock ring engages elevator tube and
securely tighten the hand screw.
No. 92 and 46 stands equipped with adjusting collar:
Securely grip head assembly. Raise adjusting collar to
allow elevator tube to move. Move head assembly to
desired height and lower lock ring to hold elevator tube in
place. Make sure elevator tube is secure.
RIDGID®
2/12
999-998-552.10
REV. A
Printed in U.S.A.
EC38979
VJ-99 RJ-99
CJ-99 VF-99
Hand Screw
Base
Head
Assembly
No. 46
Model 965
Model AR-99 Model RJ-624
Hand
Screw
Base
No. 92
Jack
Screw
Handle
Roller
Adjusting
Collar
Roller
Jack
Screw
Handle
Elevator
Tube
Jack Screw
Handle
Lock
Ring
Utilisation des porte-tubes
AVERTISSEMENT
Afin de limiter les risques d’accident grave, famil-
iarisez-vous avec les consignes de sécurité et d’util-
isation de l’ensemble du matériel présent avant d’u-
tiliser ce type d’appareil.
•Vérifier la stabilité du tuyau. Un tuyau mal soutenu
risque d’entraîner le renversement du porte-tubes ou du
tuyau lui-même et provoquer de graves blessures.
•Prévoir les équipements de protection individuelle
nécessaires. Porter systématiquement des lunettes et
chaussures de sécurité. Le port d’un masque à pous-
sière, d’une visière intégrale, d’une protection auditive ou
d’autres types d’équipement pourront éventuellement
limiter les risques de lésion corporelle.
En cas de questions visant ce produit RIDGID®:
– Consultez le revendeur RIDGID le plus proche.
– Visitez les sites www.RIDGID.com ou www.RIDGID.eu
pour obtenir les coordonnées de l’agent RIDGID le plus
proche.
– Consultez les services techniques de la société RIDGID
par mail à rtctechservices@emerson.com ou, à partir
des Etats-Unis et du Canada, en composant le (800)
519-3456.
Description
Les porte-tubes RIDGID®servent à soutenir divers types de
tuyaux dans une variété d’applications. Consultez l’étiquette
du produit ou le catalogue RIDGID pour plus de détails.
2
Pipe Stand User Guide
Models equipped with jack screw for fine adjustment: Hold
the head assembly stationary and turn the jack screw
handle to position as desired. Do not force the jack
screw handle, this can allow the screw to come loose
from the stand.
6. Place stands to properly support the pipe. Generally
pipe should be supported in at least two places. The
number and placement of stands depend on the specif-
ic circumstances, including pipe size, length and weight.
7. Carefully place the pipe on the stands. Make sure that the
pipe is properly centered on the stands to reduce the
risk of tipping. Do not drop the pipe onto the stands. Do not
exceed the stand ratings. Make sure pipe is stable and
secure. Always stay clear of supported loads.
Figure 1 – Porte-tubes RIDGID
Inspection et entretien
Nettoyez le porte-tubes afin d’en faciliter l’inspection et la
manipulation. Examinez le porte-tubes avant chaque utilisation
pour signes d’un mauvais assemblage, d’usure, de détériora-
tion, de modifications ou autres anomalies qui pourraient
nuire au bon fonctionnement et à la sécurité de l’appareil.
Installez tout élément nécessaire, tel que le manchon fileté.
Corrigez toute anomalie éventuelle avant d’utiliser l’appareil.
VJ-99 RJ-99
CJ-99 VF-99
Manchon
fileté
Embase
Tête d’ap-
pui
Tube
coulissant
Bras de
vérin à vis
Broche de
verrouillage
N° 46
Modèle 965
Modèle AR-99 Modèle RJ-624
Manchon
fileté
Base
N° 92
Jack
Screw
Handle
Galet
Bague de
réglager
Roller
Bras de
vérin à vis

Produkt Specifikationer

Mærke: Ridgid
Kategori: Ikke kategoriseret
Model: BTH-9

Har du brug for hjælp?

Hvis du har brug for hjælp til Ridgid BTH-9 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Ridgid Manualer

Ridgid

Ridgid RST100 Manual

19 Juni 2025
Ridgid

Ridgid RST180 Manual

19 Juni 2025
Ridgid

Ridgid 300 Compact Manual

12 Januar 2025
Ridgid

Ridgid K-750 Manual

12 Januar 2025
Ridgid

Ridgid HKO-186 Manual

31 August 2024
Ridgid

Ridgid Raprench 10 Manual

31 August 2024
Ridgid

Ridgid KT-190 Manual

31 August 2024
Ridgid

Ridgid 760 FXP Manual

30 August 2024
Ridgid

Ridgid 700 Manual

30 August 2024
Ridgid

Ridgid micro CA-350 Manual

30 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Rowenta

Rowenta Skin Respect EP8020 Manual

2 Juli 2025
Rowenta

Rowenta Optiliss II SF321L Manual

2 Juli 2025
Rowenta

Rowenta Flower Love EP2851 Manual

2 Juli 2025
Rowenta

Rowenta Silence Infinipro Sensor CV7620 Manual

2 Juli 2025
Rowenta

Rowenta Vacuum Technology TN9210E4 Manual

2 Juli 2025
EKO

EKO K320HGT Manual

2 Juli 2025
Rowenta

Rowenta PROCERAM SO9040 Manual

2 Juli 2025
Rowenta

Rowenta Express Style SF1831 Manual

2 Juli 2025
Rowenta

Rowenta Lissea RF3330 Manual

2 Juli 2025
Rowenta

Rowenta Turbo Silence Extreme VU5540 Manual

2 Juli 2025