Ridgid R86065 Manual

Ridgid Ikke kategoriseret R86065

Læs gratis den danske manual til Ridgid R86065 (28 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Ridgid R86065, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/28
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe
leer y comprender el manual del
operador antes de usar este producto.
AVERTISSEMENT :
Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
18 VOLT BRUSHLESS BELT SANDER
18 V PONCEUSE À BANDE SANS BALAI
18 V LIJADORA DE BANDA SIN ESCOBILLAS
R86065
To register your RIDGID
product, please visit:
http://register.RIDGID.com
Pour enregistrer votre produit
de RIDGID,
s’il vous plaît la visite :
http://register.RIDGID.com
Para registrar su producto de
RIDGID, por favor visita:
http://register.RIDGID.com
SAVE THIS MANUAL FOR
FUTURE REFERENCE
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
TABLE OF CONTENTS
****************
INCLUDES: Belt Sander, Wren ch ,
Operator’s Manual
General Power Tool Safety
Warnings 2-3 .........................................
Belt Sander Safety Warnings 3 .............
Symbols 4 ..............................................
Features 5 ..............................................
Assembly 5 ............................................
Operation 5-8 .........................................
Maintenance 9 .......................................
Illustrations 10-11 ..................................
Parts Ordering and
Service Back page ................................
TABLE DES MATIÈRES
****************
INCLUT : Ponceuse à bande, clé, manuel
d’utilisation
Règles de sécurité générales
relatives aux outils électriques 2-3 ........
Avertissements de sécurité
relatifs aux ponceuse à bande 3 ...........
Symboles 4 ............................................
 Caractéristiques .................................5
 Assemblage ........................................5
Utilisation ........................................5-8
Entretien .............................................9
Illustrations ..................................10-11
Commande de pièces
et dépannage Page arrière ....................
ÍNDICE DE CONTENIDO
****************
INCLUYE: Lijadora de banda, llave,
manual del operador
Advertencias de seguridad
para herramientas eléctrica 2-3 ...........
ijadora de banda 3Advertencias de l ....
Símbolos 4 ............................................
 Características ...................................5
 Armado ..............................................5
Funcionamiento ............................. 5-8
Mantenimiento ...................................9
Illustraciones .............................. 10-11
 Pedidos de piezas
y servicio Pág. posterior .......................
2 — English
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
WORK AREA SAFETY

Keep work area clean and well lit. Cluttered or dark
areas invite accidents.

Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.

Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of a GFCI reduces the risk
of electric shock.
Use battery only with charger listed. For use with
18V nickel-cadmium and 18V lithium-ion battery packs,
see tool/appliance/battery pack/charger correlation
supplement 988000-302.
PERSONAL SAFETY
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal
injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites
accidents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power tool
in unexpected situations.
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
Do not wear loose clothing or jewelry. Contain long
hair. Loose clothes, jewelry, or long hair can be drawn
into air vents.
Do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
power tool in unexpected situations.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired

Produkt Specifikationer

Mærke: Ridgid
Kategori: Ikke kategoriseret
Model: R86065

Har du brug for hjælp?

Hvis du har brug for hjælp til Ridgid R86065 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Ridgid Manualer

Ridgid

Ridgid RST100 Manual

19 Juni 2025
Ridgid

Ridgid RST180 Manual

19 Juni 2025
Ridgid

Ridgid 300 Compact Manual

12 Januar 2025
Ridgid

Ridgid K-750 Manual

12 Januar 2025
Ridgid

Ridgid HKO-186 Manual

31 August 2024
Ridgid

Ridgid Raprench 10 Manual

31 August 2024
Ridgid

Ridgid KT-190 Manual

31 August 2024
Ridgid

Ridgid 760 FXP Manual

30 August 2024
Ridgid

Ridgid 700 Manual

30 August 2024
Ridgid

Ridgid micro CA-350 Manual

30 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Rowenta

Rowenta Skin Respect EP8020 Manual

2 Juli 2025
Rowenta

Rowenta Optiliss II SF321L Manual

2 Juli 2025
Rowenta

Rowenta Flower Love EP2851 Manual

2 Juli 2025
Rowenta

Rowenta Silence Infinipro Sensor CV7620 Manual

2 Juli 2025
Rowenta

Rowenta Vacuum Technology TN9210E4 Manual

2 Juli 2025
EKO

EKO K320HGT Manual

2 Juli 2025
Rowenta

Rowenta PROCERAM SO9040 Manual

2 Juli 2025
Rowenta

Rowenta Express Style SF1831 Manual

2 Juli 2025
Rowenta

Rowenta Lissea RF3330 Manual

2 Juli 2025
Rowenta

Rowenta Turbo Silence Extreme VU5540 Manual

2 Juli 2025