Ridgid RST100 Manual

Ridgid Ikke kategoriseret RST100

Læs gratis den danske manual til Ridgid RST100 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Ridgid RST100, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
• Generator OK with continuous
output > 4,000 W
• Extension cord: #12 AWG or
larger; 25’ (8m) or shorter
120VAC, 20A
outlet, 30A
breaker
recommended
* TIG Torch sold separately
4. 6.
Initiate the arc with a scratch or lift technique
when in contact with the metal
7.
Adjust amperage per
material thickness
Connect TIG torch lead to
gas (100% Argon)
5.
Connect TIG torch and
ground clamp
3.
ELECTRODE IS ALWAYS ELECTRICALLY HOT
WHILE IN TIG MODE
TIG TROUBLESHOOTING TIPS
Verify machine is plugged in and
on. See manual.
Both LED lights o
Duty-cycle exceeded or
insucient air flow. Allow
machine to cool. Ensure vents
are clear of obstacles. See
manual.
Both LED lights on
• Usually due to low input power.
• Welder should be only thing plugged into circuit.
• Avoid using extension cords. If one must be used, it must be #12
AWG or larger; 25’ (8m) or shorter.
• Generators must be 4,000 W continuous output and not have a
low-idle function (or have it disabled).
Low weld output or poor fusion
Welder should be the only thing plugged into the circuit.
Frequently tripping circuit breaker or exceeding duty-cycle
Connect ground clamp to clean, bare
metal. No rust, paint or other coatings.
Attach the ground clamp directly to the
workpiece if you are experiencing issues.
Workpiece grounding
• Not recommended for this machine.
• Output is DC only which is not recommended for
TIG welding aluminum.
Aluminum welding
Read user manual
Select process
2.
1.
DC
ONLY
TIG Torch
Ground
Clamp
TIG QUICK START GUIDE
STICK PRO 100 WELDER (NOT RECOMMENDED FOR ALUMINUM)
RIDGID.COM • 1-800-4-RIDGID
RIDGID is a registered trademark of RIDGID Inc. and used under license
ENGLISH
STICK TROUBLESHOOTING TIPS
• Generator OK with continuous
output > 4,000 W
• Extension cord: #12 AWG or
larger; 25’ (8m) or shorter
120VAC, 20A
outlet, 30A
breaker
recommended
*Performance may vary by brand
Recommended electrodes
4. 6.
Adjust amperage per
settings chart on the
welder
5.
Electrode
Diameter
5/64” 3/32” 1/8”
E6010
X
E6011
E6013
E7014
E7018
X
E308L
Ni55
Connect electrode
holder and ground
clamp according to
desired polarity
3.
Usually
DCEP -
Electrode
Positive
Verify machine is plugged in and
on. See manual.
Both LED lights o
Duty-cycle exceeded or
insucient air flow. Allow
machine to cool. Ensure vents
are clear of obstacles. See
manual.
Both LED lights on
• Usually due to low input power.
• Welder should be only thing plugged into circuit.
• Avoid using extension cords. If one must be used, it must be #12
AWG or larger; 25’ (8m) or shorter.
• Generators must be 4,000 W continuous output and not have a
low-idle function (or have it disabled).
Low weld output or poor fusion
Use 1/8” diameter electrodes or smaller. Some 1/8” may draw
oo much amperage.
Trying to weld single pass on material larger than ¼” thick is
not possible with this machine. Multi-pass recommended for
thicker materials.
Welder should be the only thing plugged into the circuit.
Frequently tripping circuit breaker or exceeding duty-cycle
Connect ground clamp to clean, bare
metal. No rust, paint or other coatings.
Attach the ground clamp directly to the
workpiece if you are experiencing issues.
Workpiece grounding
• Not recommended for this machine.
• Requires more amperage on Stick than this machine is designed to
output.
Read user manual
Select process
2.
1.
Aluminum welding
Electrode Holder
Ground
Clamp
STICK QUICK START GUIDE
STICK PRO 100 WELDER (NOT RECOMMENDED FOR ALUMINUM)
RIDGID.COM • 1-800-4-RIDGID
RIDGID is a registered trademark of RIDGID Inc. and used under license
ENGLISH

Produkt Specifikationer

Mærke: Ridgid
Kategori: Ikke kategoriseret
Model: RST100

Har du brug for hjælp?

Hvis du har brug for hjælp til Ridgid RST100 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Ridgid Manualer

Ridgid

Ridgid RST100 Manual

19 Juni 2025
Ridgid

Ridgid RST180 Manual

19 Juni 2025
Ridgid

Ridgid 300 Compact Manual

12 Januar 2025
Ridgid

Ridgid K-750 Manual

12 Januar 2025
Ridgid

Ridgid HKO-186 Manual

31 August 2024
Ridgid

Ridgid Raprench 10 Manual

31 August 2024
Ridgid

Ridgid KT-190 Manual

31 August 2024
Ridgid

Ridgid 760 FXP Manual

30 August 2024
Ridgid

Ridgid 700 Manual

30 August 2024
Ridgid

Ridgid micro CA-350 Manual

30 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Haws

Haws 7777 Manual

20 Juni 2025
BEKO

BEKO GNO563E40HFGBMY Manual

20 Juni 2025
Beghelli

Beghelli 15068 Manual

20 Juni 2025
Parkside

Parkside PALA 2000 A2 Manual

20 Juni 2025
Medisana

Medisana NI 200 Manual

20 Juni 2025
Lorelli

Lorelli Tiny Dream Trio Manual

20 Juni 2025
Sogo

Sogo SS-23110 Manual

20 Juni 2025
Rane

Rane SSE 35 Manual

20 Juni 2025
Eufy

Eufy Clean XFi Manual

20 Juni 2025
Parkside

Parkside PISG 120 D5 Manual

20 Juni 2025