Robert Abbey EG43X Manual


Læs gratis den danske manual til Robert Abbey EG43X (1 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Robert Abbey EG43X, eller vil du spørge andre brugere om produktet?

Side 1/1
ASSEMBLY INSTRUCTIONS FOR YOUR
LARGE TRIPLE GOURD LAMP
ASSEMBLY INSTRUCTIONS:
NOTE: Do not connect electricity until lamp is fully assembled.
1. Remove lamp parts from packaging. Do not throw away any parts.
2. Place lamp base on level surface.
3. Remove nial (A) from harp (C). Squeeze harp (C) inward and place into the opening of saddle (D).
4. Place shade (B) onto harp (C). Thread nial (A) back onto harp (C) to secure shade (B) to lamp.
5. Install one 150W max. Type A, medium base bulb into socket.
7. Insert polarized plug (E) into wall outlet.
* To clean, use a soft cloth only. Do not use any chemical or abrasive cleaners.*
IMPORTANT SAFETY INSTRUCTIONS:
* This lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This
plug will t in a polarized outlet only one way. If it does not t fully in the outlet, reverse the plug. If it still does not t,
contact a qualied electrician. Do NOT alter the plug.
* Do not use with an extension cord unless the plug from the lamp can be fully inserted into the extension cord receptical.
* Switch power off and remove plug from the wall outlet before replacing the bulb.
372X
(A)
(B)
(C)
(D)
(E)
(F)


Produkt Specifikationer

Mærke: Robert Abbey
Kategori: Lys
Model: EG43X

Har du brug for hjælp?

Hvis du har brug for hjælp til Robert Abbey EG43X stil et spørgsmål nedenfor, og andre brugere vil svare dig