Sanus NF204 Manual

Sanus Ikke kategoriseret NF204

Læs gratis den danske manual til Sanus NF204 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om Sanus NF204, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Assembly Instructions for Natural Furniture, Model: NF204

Thank you for choosing the Natural Furniture line from Sanus Systems. If you have any questions

regarding this or any other Sanus Systems product, contact us at 800.359.5520 or visit us at

www.sanus.com. Our customer service representatives will assist you with any issues regarding

assembly or missing parts. Check to make sure none of the parts are missing or defective. Never

use defective parts. Replacement parts for products purchased from an authorized dealer will be

shipped directly to you. Please call Sanus Systems before returning products to retail stores.

Supplied Parts and Hardware: ( )Threaded are fasteners shown full size

Sanus Systems 2221 Hwy 36 West. St. Paul, MN 55113 04.11.06 (100041)

Customer Service 800.359.5520 See complementary Sanus products at www.sanus.com

Front Frame - A

Qty. 1

Rear Frame - B

Qty. 1

Glass Top Shelf - D

Qty. 1

Glass Mid Shelf - E

Qty. 3

Cross Tube - F

Qty. 6

Wire Strap - H

Qty. 2

Three Hole Plate - I

Qty. 4

Cross Tube W/ Stud - G

Qty. 2

1.5 in. Washer - M

Qty. 4

Decorative Face Bolt - K

Qty. 6

1 in. Washer - L

Qty. 4

Allen Key - O

Qty. 1

Glass Protector - N

Qty. 4

Allen Bolt - J

Qty. 8

Plastic Wire Cover - C

Qty. 1

Step 1: Attach Cross Tubes to Front Frame

NOTE: For ease of assembly, lay the Front Fame face down on a soft at surface after inserting the six Decorative

Face Bolts.

Insert six Decorative Face Bolts ( ) through the Front Frame ( ). Slide a Three Hole Plate ( ) over the Decorative Face K A I

Bolts; then, screw a Cross Tube ( ) onto each Decorative Face Bolt. Firmly hand tighten each Cross Tube.F

Diagram 1

Step 2: Attach Cross Tubes W/Stud to Front Frame

Place a 1” Washer ( ) on the threaded stud of each Cross tube W/Stud ( ) and screw them into the Front Frame ( ). Firmly L G A

hand tighten each Cross Tube W/Stud.

Diagram 2

Produkt Specifikationer

Mærke:	Sanus
Kategori:	Ikke kategoriseret
Model:	NF204

Har du brug for hjælp?

Hvis du har brug for hjælp til Sanus NF204 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Sanus Manualer

Sanus CFR518RR Manual

2 April 2025

Sanus CFR518DP Manual

1 April 2025

26 Januar 2025

26 Januar 2025

26 Januar 2025

7 Januar 2025

4 Januar 2025

Sanus SA-IWBIWP1 Manual

4 Januar 2025

Sanus FPA400 Manual

28 December 2024

Sanus VuePoint FPA400 Manual

28 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Tracer Ambience - Smart Circle Manual

17 Juni 2025

Ulsonix ULX-480-1 Manual

17 Juni 2025

JUNG CD 104.18 WU Manual

17 Juni 2025

Hughes & Kettner TriAmp MKII Manual

17 Juni 2025

Cecotec Bean&Clean Manual

17 Juni 2025

Steinberg SBS-FZ 3000/3BM Manual

17 Juni 2025

Mars Gaming MPB1000SI Manual

17 Juni 2025

Stamos SWS05 Manual

17 Juni 2025

Royal Catering RCAT-140/80 Manual

17 Juni 2025

Planet Audio P90CPAP Manual

17 Juni 2025