Sanyo SAP-KRV96 Manual

Sanyo Klimaanlæg SAP-KRV96

Læs nedenfor 📖 manual på dansk for Sanyo SAP-KRV96 (10 sider) i kategorien Klimaanlæg. Denne guide var nyttig for 10 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/10
16
English
3-8. Mounting
(1) To install the indoor unit, mount the indoor unit
onto the 2 tabs on the upper part of the rear plate.
(2) Hold down the air discharge outlet and press the
lower part of the indoor unit until it clicks to
securely fasten to the 2 tabs on the lower part of
the rear plate. (Fig. 33)
For tubing, choose either the right or left tubing direc-
tion and follow the steps below. This work can be made
easier by placing padding material (such as styrofoam)
at the rear right side of the indoor unit. (Fig. 34a)
Or extend the support on the back of the indoor unit as
a stand to make your work easier. (Fig. 34b)
I Right-side tubing
(1) Shape the refrigerant tubing so that it can easily
go into the wall hole. (Fig. 35a or 35b)
(2) Push the wiring, refrigerant tubing, and drain hose
through the hole in the wall. Adjust the indoor unit
so it is securely seated on the rear panel. (Fig. 36)
(3) Carefully bend the tubing (if necessary) to run
along the wall in the direction of the outdoor unit
and then tape as far as the fittings. (See Caution
on page 10 or 15 in the outdoor unit installation
manual.) The drain hose should come straight
down the wall to a point where water runoff won’t
stain the wall.
(4) Connect the refrigerant tubing to the outdoor unit.
(After performing a leak test on the connecting
part, insulate it with the tubing insulation. (Fig. 37))
Also, refer to Section 3-6. Tubing connections in
the outdoor unit installation manual.
(5) Assemble the refrigerant tubing, drain hose, and
inter-unit wiring as shown in Fig. 37.
NOTE
Cover
Refrigerant
tubing
Rear panel
Drain hose
Inter-unit
wiring
Fig. 35a
Fig. 36
Fig. 33
P hus
Insulation
Paddi materialng
Fig. 34a
Rear panel
(SAP-KRV96)
(SAP-KMRV74, KMRV94, KMRV124)
(SAP-KMRV76, KMRV96, KMRV126)
(SAP-KRV184, KRV244)
(SAP-KRV186, KRV246)
Fig. 34b
Fig. 37
Wall cap
Tab
Rear pa eln
Refri era tg n
t biu ng
Inter- itun
wiring
Drai hon se
Fig. 35b
(SAP-KMRV74, KMRV94, KMRV124)
(SAP-KMRV76, KMRV96, KMRV126)
(SAP-KRV184, KRV244)
(SAP-KRV186, KRV246)
(SAP-KRV96)


Produkt Specifikationer

Mærke: Sanyo
Kategori: Klimaanlæg
Model: SAP-KRV96

Har du brug for hjælp?

Hvis du har brug for hjælp til Sanyo SAP-KRV96 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Klimaanlæg Sanyo Manualer

Sanyo

Sanyo SA-186P Manual

13 Marts 2024
Sanyo

Sanyo SAP-KMRV74 Manual

28 December 2023
Sanyo

Sanyo XS1852 Manual

15 December 2023
Sanyo

Sanyo SAP-KMRV76 Manual

18 September 2023
Sanyo

Sanyo SAP-KRV184 Manual

20 August 2023
Sanyo

Sanyo SA-96P Manual

10 Maj 2023
Sanyo

Sanyo KS3632 Manual

10 Februar 2023
Sanyo

Sanyo TS4232 Manual

27 December 2022
Sanyo

Sanyo SAP-KRV96EH Manual

15 December 2022

Klimaanlæg Manualer

Nyeste Klimaanlæg Manualer