Sharp XLHF202PH Manual

Sharp Hi-Fi system XLHF202PH

Læs gratis den danske manual til Sharp XLHF202PH (2 sider) i kategorien Hi-Fi system. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Sharp XLHF202PH, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

MODEL

XL-HF202PH(S)

XL-HF202PH(BK)

XL-HF302PH(T)

HI FI COMPONENT SYSTEM

This Quick Start Guide will help you to correctly install and operate your system.

1 Accessories

3 System connections

2Remote control battery installation

Use “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).

1 Open the battery cover.

2 Insert the batteries as shown.

3 Close the cover.

13H R MW 1

TINSEA452AWZZ

If you require any advice or assistance regarding

your Sharp product, please visit our web-site

www.sharp.co.uk/support

Customers without internet access may telephone

0845 880 0512 during office hours (or (01) 676 0648

if telephoning from Ireland).

Remote control x 1

RRMCGA334AWZZ

“AA” size battery

(UM/SUM-3, R6, HP-7

or similar) x 1

Stand for iPad x 1

NFC tag x 2

Speaker wires x 2

(for XL-HF202PH(S) /

XL-HF202PH(BK))

Speaker wires x 2

(for XL-HF302PH(T)) FM aerial x 1

Velcro tape

(hook type) x 2

Velcro tape

(loop type) x 3

Wall socket

(AC 220 - 240 V ~ 50/60 Hz)

To TV audio

output socket

aerial

Left

speaker

Right

speaker

Red

To LINE

input

socket To audio input

socket

Audio cable

(not supplied)

Commercially

available

Subwoofer

(Ampliﬁ er

Built-In)

4 Turn on your system

5Bluetooth one touch connection via NFC

6Listening on AndroidTM devices

Press the ON/STAND-BY button to turn the power on.

Keep all small parts away from children as they may be

accidentally swallowed.

The NFC tags can be placed anywhere convenient to you. The

velcro tapes supplied will help to secure the tags onto the desired

location.

This audio system supports NFC-enabled device with Android 4.1,

Jelly Bean and higher.

Make sure that the NFC tag is placed on a ﬂat and level surface.

If you choose not to use the velcro tape, do not place the

NFC tag near metal surface to avoid connection interference

during tagging.

Peel the separator off the velcro tape (loop type) and stick it on a

desired surface.

Peel the separator off the velcro tape (hook type) and stick it to

the rear of the NFC tag. Then place the tag onto the desired

location.

NFC tag set up Your device (smartphone / tablet) has an NFC function.

NFC function on your device is turned on.

Screen lock function of the device is off.

This unit is not in Eco mode.

A pop-up window asking whether to proceed

with the Bluetooth connection appears on

the device. Select <YES>.

The ‘connected’ message appears when

the connection is complete.

Playback will start automatically. Otherwise, press play (on

remote control or source device).

Sound will be heard from the speakers of this unit via audio

streaming.

Your device and NFC tag must be within 10 meters from the

unit.

Press the ON/STAND-BY button to turn the power on.

Press the USB button (remote control) or FUNCTION button

repeatedly (main unit) to select USB function.

Connect the device (Smartphone/Tablet) to the unit.

Press the play button (on main unit, remote control or device).

Quit the application (apps).

Disconnect the device from the USB terminal.

To listen to audio via connectivity without NFC tag - Bluetooth

refer “Pairing with other source devicesBluetooth ” on page 8

of the operation manual.

To disconnect, simply touch your device to the tag again.

Touch your device to the supplied NFC tag.

NFC connection for audio playback

Android device playback

To disconnect the Android device

NFC tag

Bluetooth operation buttons (remote control only)

Press the button to play or pause.

Press the button to skip up.

Press and hold to fast forward.

Press the button to skip down.

Press and hold to fast reverse.

Caution :

Insert the connector to the device.

Connect the device to the main unit via USB connector.

separator

velcro tape

(loop type)

separator

rear view of the NFC tag

velcro tape

(hook type)

Check that :

Note :

Connector

Device

(Smartphone/Tablet)

USB connector

(not supplied)

Produkt Specifikationer

Mærke:	Sharp
Kategori:	Hi-Fi system
Model:	XLHF202PH
Type:	Home audio mini system
Bredde:	335 mm
Dybde:	215 mm
Højde:	96 mm
Vægt:	2600 g
Brugervejledning:	Ja
Produktfarve:	Sølv
Skærmtype:	LED
Bluetooth:	Ja
USB-port:	Ja
Tuner type:	Digital
Antal højttalere:	2
Udgangseffekt (RMS):	66 W
Equalizer:	Ja
Antal USB 2.0-porte:	1
Udgange til hovedtelefoner:	1
Ethernet LAN:	Ingen
Slumretimer:	Ja
Understøttede lydformater:	MP3,WMA
Strømforbrug (standby):	0.4 W
Strømforbrug (typisk):	40 W
Volumenkontrol:	Dreje
Integreret ur:	Ja
Fjernbetjening inkluderet:	Ja
Impedens:	75 ohm (Ω)
Højttaler, type:	2-vejs
Strømkilde:	Vekselstrøm
Near Field Communication (NFC):	Ja
LED-indikatorer:	Ja
Understøttede disktyper:	CD,CD-R,CD-RW
Indbygget kortlæser:	Ingen
AUX-indgang:	Ja
Understøttede radiobånd:	AM,FM
RDS Tuner inkluderet:	Ja
MP3-afspilning:	Ja
Indgangsspænding:	230 V
Peak Music-Udgangseffekt (PMPO):	200 W
Tilslutning af hovedtelefoner:	3,5 mm
Indgangsfrekvens:	50 Hz
Signal/støjforhold:	90 dB
FM båndbredde:	87.5 - 108 Mhz
Bas indstillinger:	Ja
Diskant indstillinger:	Ja
Kampatibilitet med Apple-docking:	iPad,iPhone,iPod
Antal forudindstillede stationer:	40
FM-antenne:	Ja
CD-afspiller:	Ja
Kassettebåndoptager:	Ingen
Subwoofer RMS-effekt:	100 W
Subwoofer inkluderet:	Ja
AM båndbredde:	522 - 1620 kHz
Optisk diskafspiller:	Ja
Antal optiske diske:	1 diske
Fronthøjttaler vægt:	2540 g
Fronthøjttaler bredde:	148 mm
Fronthøjttaler dybde:	203.5 mm
Fronthøjttaler højde:	262 mm
Video indgang:	1
Hukommelseskort inkluderet:	Ingen
Antal højttalerudgange:	2