Shure Microflex MX418 Manual

Shure Mikrofon Microflex MX418

Læs gratis den danske manual til Shure Microflex MX418 (12 sider) i kategorien Mikrofon. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Shure Microflex MX418, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

GENERAL

Shure Microflexr MX400 Series microphones are miniature goose-

neck-mounted electret condenser microphones designed primarily for

speech and vocal pickup. They can be mounted on lecterns, pulpits,

or conference tables. All models include a preamplifier and are avail-

able with interchangeable cardioid, supercardioid, or omnidirectional

cartridges.

FEATURES

SWide dynamic range and frequency response for

accurate sound reproduction across the audio spectrum

SInterchangeable cartridges provide the right polar

pattern for every application

SBalanced, transformerless output for increased immunity

to noise over long cable runs

SShock mount provides over 20 dB isolation from surface

vibration noise

SLocking flange mount for permanently securing

microphone to lecterns, pulpits, or conference tables

SSnap-fit foam windscreen

MODEL VARIATIONS

SMX412: 305 mm (12 in.) gooseneck microphone.

SMX418: 457 mm (18 in.) gooseneck microphone.

SMX412S: 305 mm (12 in) gooseneck microphone;

includes a mute switch and an LED.

SMX418S: 457 mm (18 in) gooseneck microphone;

includes a mute switch and an LED.

SELECTING A POLAR PATTERN

All MicroflexR microphones are available with any one of three inter-

changeable cartridges. The polar pattern of the cartridge is indicated

by the model number suffix:

/C = Cardioid, /S = Supercardioid, /O= Omnidirectional

Cardioid (C). Recommended for general sound reinforcement

applications. Pickup angle (–3 dB) = 130°.

Supercardioid (S). Recommended for sound reinforcement

applications requiring narrow or more distant coverage. Pickup

angle (–3 dB) = 115°.

Omnidirectional (O). Recommended for recording or remote

monitoring applications. Pickup angle = 360°.

GENERAL INSTALLATION GUIDELINES

1. Aim the microphone toward the desired sound source,

such as the talker, and away from any unwanted sound

source, such as a loudspeaker.

2. Place the tip of the microphone within 15 to 30 cm (6 to

12 in.) of the desired sound source.

3. Always use the supplied windscreen or the optional met-

al windscreen to control breath noise.

4. If four or more microphones will be open at the same time,

use of an automatic mixer, such as the Shure SCM810

or FP410, is recommended.

MICROPHONE INSTALLATION

Installing a Microphone in a Mounting Flange (Figure 2)

1. Drill a 22 mm (7/8 in.) diameter hole in the desired location.

2. Trace and drill three starter holes for the supplied screws

using the flange as a template.

3. Insert the preamplifier through the mounting flange.

4. Slip the mounting flange retaining ring over the bottom

of the preamplifier and slide it up until it is flush to the bot-

tom of the flange. Then press the ring firmly into place.

5. Secure the flange to the mounting surface with three

screws.

Installing a Microphone in a Shock Mount (Figure 1)

1. Drill a 44 mm (1-3/4 in.) diameter hole in the desired

location.

2. Trace and drill three starter holes for the screws using

the shock mount as a template.

3. Secure the shock mount to the mounting surface with

three screws.

Installing the Foam Windscreen (Figure 3)

1. Press the foam windscreen onto the microphone until it

snaps into the groove located below the cartridge.

2. To remove the windscreen, spread the gap in its mounting

ring with a screwdriver or thumbnail and pull the wind-

screen off carefully.

ADJUSTING PREAMP GAIN (Figure 4)

This MX microphone includes an adjustable gain preamplifier, al-

lowing the user to specify a 12 dB or 0 dB gain setting. The preamp

ships at the 12dB setting. Gain may be decreased by 12dB by moving

the preamp jumpers to the 0dB setting.

SPECIFICATIONS

Frequency Response (Figure 5)

50 to 17,000 Hz

Polar Pattern (Figure 5)

Output Impedance (at 1000 Hz)

180 Ω actual (rated at 150 Ω)

Microflex MX400S Series

User Guide

27F2830 (BG)

2002, Shure Incorporated Printed in U.S.A.

Produkt Specifikationer

Mærke:	Shure
Kategori:	Mikrofon
Model:	Microflex MX418

Har du brug for hjælp?

Hvis du har brug for hjælp til Shure Microflex MX418 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Mikrofon Shure Manualer

28 September 2025

1 September 2025

22 August 2025

18 August 2025

22 Juli 2025

Shure PGA56-XLR Manual

15 Juli 2025

Shure ULXD6 Manual

23 Juni 2025

Shure MoveMic One Manual

21 Februar 2025

Shure MV7i Manual

21 Februar 2025

Shure VP89M Manual

29 December 2024

Mikrofon Manualer

Nyeste Mikrofon Manualer

Nady SCM 800 Manual

4 November 2025

Nady SP-R3 Manual

4 November 2025

Phenyx Pro PTU-7000A Manual

4 November 2025

JARO J100-CS Manual

4 November 2025

MayBesta WM150 Manual

3 November 2025

XIAOKOA N80-B Manual

3 November 2025

Singing Machine CPK565 Manual

3 November 2025

Shaevle SW-16 Manual

3 November 2025

HOTEC H-U25 Manual

3 November 2025

Saramonic Blink500 B3 Manual

3 November 2025