Shuttle D 8100BA Manual

Shuttle Skrivebord D 8100BA

Læs gratis den danske manual til Shuttle D 8100BA (1 sider) i kategorien Skrivebord. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Shuttle D 8100BA, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

__p

DS81 Series Quick Guide

【

English

】

Jumper Settings

C. Memory Module Installation

53R-DS8103-2001

Front Panel

Back Panel

The product’s color and specification will depend on the actual shipping product.

A. Begin Installation

D. Component Installation

Safety Information

Read the following precautions before setting up a Shuttle XPC.

CAUTION

Incorrectly replacing the battery may damage this computer.

Replace only with the same or equivalent as recommended by Shuttle.

Dispose of used batteries according to the manufacturer's instructions.

E. Complete

1. Unscrew the two screws of the chassis cover.

1. Install the Mini PCIE card into the Mini PCIE slot and

secure with

screw

3. Connect the Serial ATA and power cables to the HDD.

B. CPU and ICE Module Installation

2. Place the HDD in the rack and secure with the four screws from the side.

For safety reasons, please ensure that the power cord is discon-

nected before opening the case.

Please note this 1150 pin socket bends easily. Always apply

extreme care and little force when installing a CPU and limit the

number of times you remove or exchange it. Before installation,

make sure to turn off the computer and unplug the power cord

from the mains to avoid damage.

notch

SODIMM slot

DO NOT touch socket contacts. To protect the CPU socket, always

replace the protective socket cover when the CPU is not installed.

Triangle Pin1

Marking on the CPU

Notch on the CPU/

Alignment Key of the

CPU Socket

Latch

Please be aware of the CPU orientation, DO NOT force the CPU into

the socket to avoid bending of pins on the socket and damage of CPU!

Please do not apply excess amount of thermal paste.

2 . Complete.

2. Slide the cover backwards and upwards.

3. Unfasten the rack mount screw and remove the rack.

1. Unfasten the four ICE module attachment screws and unplug the fan

connector.

2. Remove the ICE module from the chassis and put it aside.

4. Slide the rack in the chassis and refasten the screw.

Please load the optimized BIOS settings.

3. Tear off the protective membrane first, then unlock and raise the socket

lever.

Follow the steps below to correctly install the CPU into the

motherboard CPU socket.

5. Orientate the CPU and socket and please align the CPU notches with

the socket alignment keys. Make sure the CPU is perfectly horizontal,

insert it into the socket.

4. Lift the metal load plate on the CPU socket.

6. Close the metal load plate, lower the CPU socket lever and lock in place.

7. Spread thermal paste evenly on the CPU surface.

1. Locate the SODIMM slot on the mainboard.

2. Align the notch of the memory module with the one of the memory slot.

3. Gently insert the module into the slot in a 45-degree angle.

4. Carefully push down the memory

module until it snaps into the

locking mechanism.

5. Repeat the above steps to install additional memory modules, if required.

F1. Mic-In

F2. Headphone

F3. Power LED

F4. HDD LED

F5. Power Button

F6. Card reader

F7. USB2.0 Ports

Serial ATA Cable

Serial ATA Power Cable

8. Screw the ICE module to the mainboard. Note to press down on the

opposite diagonal corner while tightening each screw.

9. Connect the fan connector.

Retention tab

Fan connector

Metal load plate

Thermal Paste

application area

Load lever

COM PORT

Pin Assignments (COM1&COM2):

1=DCD 2=RX

3=TX 4=DTR

5=GND 6=DSR

7=RTS 8=CTS

9=RI 10=NC

9 7 5 3 1

10 8 6 4 2

Left / Right Panel

Motherboard Illustration

Kensington® Lock Port

B1. COM1 Port

(RS232/RS422/RS485)

B2. COM2 Port (RS232 only)

B3. Power Jack (DC-in)

B4. LAN Ports

B5. USB3.0 Ports

B6. USB2.0 Ports

B7. DisplayPort

B8. HDMI Port

B9. Clear CMOS&POWER

BUTTON

HDD Rack

Audio Connector

Pin Assignments (AUDIO2):

1=PULL AGND 2=LINE-R

3=NC 4=LINE-L

5=PULL AGND 6=FRONT_L

7=NC 8=FRONT_SENSE

9=PULL AGND 10=FRONT_R

11=BK_AUDIO-JD 12=MIC1_R

13=AGND 14=MIC1_L

13 11 9 7 5 3 1

14 12 10 8 6 4 2

1. Replace the cover and refasten the screws.

F5 F6

F1 F2 F3 F4

Remove the

protective

membrane

Metal load plate

LGA1150 Package

CPU Socket

Intel H81 Chipset

Audio Connector

DDR3 SODIMM

slots

Mini PCIE Slot

SPK1

DC IN LAN Ports USB2.0

(x2) Ports

USB3.0

(x2) Ports

Display

Port

HDMI

Port

SW3

SW2

USB

MC In

Headphone

Power LED

HDD LED

Card

Reader Slot

USB 2.0

C1 C2 C4

C12

Power Button (SW3)

Fan Connector

Pin Assignments (FAN1):

1=GND

2=+12V

3=SPEED_SENSE

4=PWM_CTRL

SPK1

VGA Connector

Pin Assignments (CN25):

1=GND 11=CRT_HSYNC_R

2=GND 12=GND

3=SDVO_CLK_D 13=GND

4=GND 14=GND

5=SDVO_DATE_D 15=BOUT-O

6=GND 16=VGA_PWR

7=GND 17=GOUT-O

8=GND 18=VGA_PWR

9=CRT_VSYNC_R 19=ROUT-O

10=GND 20=VGA_PWR

2 20

C10

EDP Connector V1.0

Pin Assignments:

1=PANEL_VDD

2=CAD_56B

3=PANEL_VDD

4=HPD_56B_C

5=PANEL_VDD

6=NC

7=PANEL_VDD

8=NC

9=PANEL_VDD

10=NC

11=GND

12=GND

13=EDP_BKLTCTL

14=AUX-_56B_C

15=EDP_BKLTEN

16=AUX+_56B_C

17=GND

18=GND

19=NC

20=D3-_56B_C

3940

PW1

C13

CN1

C11

Battery connector

Pin Assignments (CN1):

1=V_BAT

2=GND

C11

Clear CMOS&POWER BUTTON

Pin Assignments (SW2):

1=RTCRST-

2=+5V

3=GND

4=PWRSW-

C12

C13

SATA POWER connector

Pin Assignments (PW1):

1=GND

2=GND

3=+5v

4=+5v

1 2 3 4

USB Connector

Pin Assignments :

1=GND

2=USB10P

3=USB10N

4=USBPW04

1 2

LPC connector

Pin Assignments (LPC1):

1=CLK-33M 11=L_AD0

2=GND 12=GND

3=LFRAME 13=LPC_48M

4=NC 14=PCH_PME-

5=SIORST# 15=+3.3VS

6=-XRI3 16=SERIRQ

7=L_AD3 17=GND

8=L_AD2 18=+3.3V

9=+3.3V 19=+3.3V

10=L_AD1 20=SUS_CLK

FAN1

62R-DS8100-0601

English.Spanish.Korean.

Traditional Chinese.Japanese.

French. German Quick Guide

Socket

1155

CPU

45-degree

angle

21=NC

22=D3+_56B_C

23=GND

24=GND

25=INV_PWR_SRC

26=D2-_56B_C

27=INV_PWR_SRC

28=D2+_56B_C

29=INV_PWR_SRC

30=GND

31=INV_PWR_SRC

32=D1-56B_C

33=INV_PWR_SRC

34=D1+56B_C

35=GND

36=GND

37=NC

38=D0-_56B_C

39=NC

40=D0+_56B_C

Pin Assignments (CN1):

1=SPKR_OUT

2=GND

Cutout

Support RS232 Back panel

Independent External Power 12V / 5V

(DEFAULT=SHORT 1-2,3-4)

IF JUMP1 Connector Pin 5 and Pin 7 = COM1 is +5V

IF JUMP2 Connector Pin 6 and Pin 8 = COM2 is +5V

IF JUMP1 Connector Pin 7 and Pin 9 = COM1 is +12V

IF JUMP2 Connector Pin 8 and Pin 10 = COM2 is +12V

Pin Assignments (JP3):

1=-XRI1 2=COM_-XRI1

3=-XRI2 4=COM_-XRI2

5=+5V 6=+5V

7=COM1_PWR 8=COM2_PWR

9=+12V 10=+12V

1920

Serial ATA Connectors

SATA3

SATA6

CN25

EDP

C10

COM 2

LPC

JP3

COM 1

B5 B6

Produkt Specifikationer

Mærke:	Shuttle
Kategori:	Skrivebord
Model:	D 8100BA
Bredde:	165 mm
Dybde:	190 mm
Højde:	43 mm
Vægt:	1300 g
Brugervejledning:	Ja
Produktfarve:	Sort
Produkttype:	PC
Kompatible hukommelseskort:	SD, SDHC, SDXC
Wi-Fi:	Ingen
Relativ luftfugtighed ved drift (H-H):	10 - 90 %
Antal HDMI-porte:	1
DVI-port:	Ingen
Ethernet LAN-porte (RJ-45):	2
Antal USB 2.0-porte:	6
Antal USB 3.2 Gen 1 (3.1 Gen 1) type-A-porte:	2
Udgange til hovedtelefoner:	1
Ethernet LAN:	Ja
Processorkerner:	2
Driftstemperatur (T-T):	0 - 45 °C
Ethernet LAN-datahastigheder:	10,100,1000 Mbit/s
Intern hukommelse:	4 GB
Operativsystem installeret:	Windows 7 Professional
Certificering:	FCC, CE, BSMI, C-Tick, CB, BSMI, ETL
Kabelteknologi:	10/100/1000Base-T(X)
DC-in-stik:	Ja
Indbygget kortlæser:	Ja
Intel® Wireless Display (Intel® WiDi):	Ja
Understøttet placering:	Vandret
Strømforsyningens indgangsfrekvens:	50 - 60 Hz
Processorfrekvens:	3.4 GHz
Processorserie:	Intel® Core™ i3
Processortråde:	4
Processor-cache:	3 MB
Processor cache type:	Smart cache
Intern hukommelsestype:	DDR3-SDRAM
Maksimal intern hukommelse:	16 GB
Samlet lagringskapacitet:	120 GB
Lagermedie:	SSD
On-board grafikkort, model:	Intel® HD Graphics 4400
Diskret grafikadaptermodel:	Ikke tilgængelig
On-board grafikkort:	Ja
Indbygget grafikadapterfamilie:	Intel® HD Graphics
Mikrofonindgang:	Ja
Intel® Hyper Threading Teknologi (Intel® HT Technology):	Ja
Intel® Turbo Boost Teknologi:	Ingen
Slot til kabellås:	Ja
Lydsystem:	Realtek ALC 662-VC
Hukommelsesstik:	2x DIMM
Processorproducent:	Intel
Processormodel:	i3-4130
Drivere inkluderet:	Ja
Antal DisplayPorts:	2
Antal VGA-porte (D-sub):	1
Kabellåseslids type:	Kensington
Mus inkluderet:	Ingen
Antal installerede SSD'er:	1
SDD-kapacitet:	120 GB
SSD-grænsefladetype:	SATA III
Optisk drevtype:	Ingen
Enhanced Intel SpeedStep Teknologi:	Ja
Udfør deaktivering af bit:	Ja
Idle status:	Ja
CPU-konfiguration (maks.):	1
Intel® VT-x with Extended Page Tables (EPT):	Ja
Indlejret tilgængelige muligheder:	Ingen
Intel® 64:	Ja
Intel® Virtualization Technology for Directed I/O (VT-d):	Ingen
Intel® Virtualization Technology (VT-x):	Ja
Skærm inkluderet:	Ingen
Strømforsyning indgangsspænding:	100 - 240 V
Beskyttelse af adgangskode:	Ja
Antal serielle porte:	1
Antal installerede processorer:	1
Bus type:	DMI2
Processorgeneration:	4th gen Intel® Core™ i3
Kabinettype:	Nettop
Intel® Flex Memory Access:	Ingen
Intel® Trusted Execution Teknologi:	Ingen
Intel® Enhanced Halt State:	Ja
Intel® TSX-NI:	Ingen
Intel® Stabil Billede Platformsprogram (SIPP):	Ingen
Intel® klar video teknologi:	Ingen
Intel® Stable Billede Platform Program (SIPP) version:	0.00
Intel® TSX-NI-version:	0.00
Konfliktfri processor:	Ja
Strømforsyning:	90 W
Processor sokkel:	LGA 1150 (stik H3)
Processor litografi:	22 nm
Stepping:	C0
Thermal Design Power (TDP):	65, 54 W
Maksimalt antal PCI Express-kanaler:	16
PCI Express slots version:	3.0
PCI Express-konfigurationer:	1x8, 1x16, 2x4, 2x8
Fejlkorrigerende kode understøttet af processor:	Ja
Processor front side bus:	- MHz
Systembus-hastighed:	5 GT/s
Processor driftstilstande:	64-bit
Processor kodenavn:	Haswell
FSB Paritet:	Ingen
Intel® InTru™ 3D Teknologi:	Ja
Intel® Clear Video HD Teknologi (Intel® CVT HD):	Ja
Intel® Insider™:	Ingen
Intel® My WiFi Teknologi (Intel® MWT):	Ingen
Intel® Anti-Theft Teknologi (Intel® AT):	Ingen
Intel® Quick Sync Video Teknologi:	Ja
Intel® AES Nye Instruktioner (Intel® AES-NI):	Ja
Intel® Demand Based Switching:	Ingen
Termiske overvågningsteknologier:	Ja
Intel® Dual Display Capable Teknologi:	Ingen
Intel® FDI Teknologi:	Ingen
Intel® Rapid Storage Teknologi:	Ingen
Intel® Fast Memory Access:	Ingen
Intel® Clear Video Teknologi til MID (Intel® CVT for MID):	Ingen
Processor-pakke størrelse:	37.5 x 37.5 mm
Grafisk og IMC litografi:	22 nm
Processor ARK ID:	77480
Hukommelseslayout (slots x størrelse):	- GB
Indbygget grafikadapter basefrekvens:	350 MHz
Indbygget grafikadapter dynamisk frekvens (maks.):	1150 MHz
Indbygget grafikadapter-ID:	0x41E
Operativsystemets arkitektur:	64-bit
Understøttede instruktionssæt:	AVX 2.0
Maksimalt indbygget grafikadapterhukommelse:	1.74 GB
Indbygget grafikadapter DirectX-version:	11.1
Kompatibel processor serie:	Intel Celeron G, Intel Pentium G
Bundkort chipsæt:	Intel® H81
Hukommelseskanaler:	To-kanals
Tastatur inkluderet:	Ingen
Maksimal intern hukommelse understøttet af processor:	32 GB
Hukommelsestyper understøttet af processor:	DDR3-1333/1600, DDR3L-1333/1600 @ 1.5V
Hukommelsesurhastigheder understøttet af processor:	1333,1600 MHz
Hukommelsesbåndbredde understøttet af processor (maks.):	25.6 GB/sek.
Tcase:	72 °C
Antal understøttede skærme (indbygget grafik):	3
Skalerbarhed:	1S
Specifikation for termisk opløsning:	PCG 2013C
Intel® Small Business Advantage (SBA) version:	1.00
Vandkølesystem:	Ingen