Singer 29K71 Manual

Singer Symaskine 29K71

Læs gratis den danske manual til Singer 29K71 (13 sider) i kategorien Symaskine. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Singer 29K71, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/13

DESCRIPTION

Machines 29K71, 29K72 and 29K73, for stitching boots, shoes, and other tubular work in leather and fabrics, have the

following characteristics:

Single Needle, lock Stitch.

Stop Motion Hand Whee1-releases hand wheel from stitching mechanism for bobbin winding.

Horizontal Oscillating Shuttle.

Eccentric Adjustment for Shuttle Timing.

Cylinder Bed.

Replaceable Steel Horn.

Universal Upper Feed for Stitching in any direction without turning the work.

Stitch length: 7 to 15 to the inch, depending on material being stitched and operations performed.

Presser Foot rise during feeding action: 1/4 inch -(Maximum clearance: 3/8 inch).

Double End Needle Plate -(two sizes of needle holes at each end for various sizes of needles).

Adjustable Thread Take-up lever.

Two Speed Machine Pulley.

ACCESSORIES AVAILABLE UPON ORDER

(At additional charge)

Attachment for fitting Hand Wheel on front of machine (Part No.821211)

Stand for mounting the machine 601405 or 601407 for foot power.

601406 or 601408 for electric power.

Detachable Work Table for flat stitching operations (Part No. 83739, 83740, or 83741).

Electric Transmitter S-9.

SPECIAL FEATURES

MACHINE 29K71 (Was 29K53)

End of cylinder bed is 1 inch wide and 7/8 inch deep.

Space at right of need1e 12- 1/4 inches.

Diameters of belt grooves 2-7/8 inches and 4-7/8 inches.

MACHINE 29K72

End of cylinder bed is 1-5/32 inches wide and 1-1/16 inche5 deep.

Space at right of needle 17-1/2 inches.

Diameters of belt grooves 3-1/4 inches and 5.1/2 inches.

Large Bobbin.

MACHINE 29K73

End of cylinder bed is 1 inch wide and 7/8 inch deep.

Space at right of needle 17-1/2 inches.

Diameters of belt grooves 3-1/4 inches and 5-1/2 inches.

SPEED

The maximum speed recommended for these machines is

500 stitches per minute, depending on material being

stitched and operations performed.

For thick work, patching, mending, and stitching elastics

put the driving belt on the larger pulley of the machine and

the smaller pulley of the stand.

For light work, put the belt on smaller pulley of the

machine and the larger pulley of the stand.

When in operation, the hand wheel must always turn over

toward the operator (counter-clockwise).

NOTE: If fitted on front of machine, hand wheel must

always turn over toward the right (clockwise).

TO OIL MACHINE

Fig. 2. Oiling Front Side of Machine

When machine is received from the factory, it should be

thoroughly cleaned and a drop of oil should be applied to

all parts indicated in Figs. 2, 3 and 4.

Apply a drop of oil to the stand at the centres upon which

band wheel and treadle work. Also to both ends of the

pitman rod connecting the treadle with band wheel.

Run machine for a few minutes to work oil into bearings.

When the machine is in constant use, it should be oiled

daily.

Fig. 3. Oiling Rear of Machine

Use "TYPE B" or "TYPE D" OIL sold by Singer Sewing

Machine Company.

See inside front cover of this book for description of these

oils.

Fig. 4. Oiling Shuttle Race

To oil shuttle race, raise needle bar to its highest point and

lift feeding foot A, Fig. 5 by moving lifter B upward.

Press down lever C, Fig. 5 and swing needle plate to

position shown in Fig. 4.

Apply a drop of oil to the face of shuttle race and to the

hole shown by arrow in Fig. 4.

Produkt Specifikationer

Mærke:	Singer
Kategori:	Symaskine
Model:	29K71

Har du brug for hjælp?

Hvis du har brug for hjælp til Singer 29K71 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Symaskine Singer Manualer

Singer C5900 Manual

1 August 2025

Singer C620L Manual

1 August 2025

Singer M2505 Manual

1 August 2025

Singer Stylist 9100 Manual

1 August 2025

Singer Heavy Duty HD6605C Manual

30 Juni 2025

Singer HD 6705C Manual

31 Maj 2025

Singer Little Touch & Sew 67A Manual

5 Februar 2025

Singer C5980 Manual

2 Februar 2025

Singer HD6335M Manual

6 Januar 2025

Singer HD6330M Manual

31 December 2025

Symaskine Manualer

Nyeste Symaskine Manualer

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

Juki MS-1261A-DWS Manual

9 August 2025