Singer Heavy Duty 6600C Manual

Singer Symaskine Heavy Duty 6600C

Læs gratis den danske manual til Singer Heavy Duty 6600C (40 sider) i kategorien Symaskine. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Singer Heavy Duty 6600C, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/40

INSTRUCTION MANUAL

HD 6600C • HD 6605C

This household sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594.

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic safety precautions should always be followed, including the

following:

Read all instructions before using this household sewing machine. Keep the instructions at a suitable place

close to the machine. Make sure to hand them over if the machine is given to a third party.

DANGER –TO REDUCE THE RISK OF ELECTRIC SHOCK:

• A sewing machine should never be left unattended when plugged in. The electrical socket, to which the

machine is plugged in should be easily accessible. Always unplug this sewing machine from the electric

outlet immediately after using and before cleaning, removing covers, lubricating or when making any other

user servicing adjustments mentioned in the instruction manual.

WARNING –TO REDUCE THE RISK OF BURNS, FIRE,

ELECTRIC SHOCK, OR INJURY TO PERSON:

• Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near

children.

• Use this sewing machine only for its intended use as described in this manual. Use only attachments

recommended by the manufacturer as contained in this manual.

• Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has

been dropped or damaged, or dropped into water. Return the sewing machine to the nearest authorized

dealer or service center for examination, repair, electrical or mechanical adjustment.

• Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the sewing

machine and foot control free from the accumulation of lint, dust, and loose cloth.

• Keep fingers away from all moving parts. Special care is required around the sewing machine needle.

• Always use the proper needle plate. The wrong plate can cause the needle to break.

• Do not use bent needles.

• Do not pull or push fabric while stitching. It may deflect the needle causing it to break.

• Wear safety glasses.

• Switch the sewing machine off (“0”) when making any adjustment in the needle area, such as threading

needle, changing needle, threading bobbin, or changing presser foot, etc.

• Never drop or insert any object into any opening.

• Do not use outdoors.

• Do not operate where aerosol (spray) products are being used or where oxygen is being administrated.

• To disconnect, turn all controls to the off (“0”) position, then remove plug from outlet.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

• The foot control is used to operate the machine. Never place other objects on the foot control.

• Do not use the machine if it is wet.

• If the LED lamp is damaged or broken, it must be replaced by the manufacturer or its service agent or a

similarly qualified person, in order to avoid a hazard.

Produkt Specifikationer

Mærke:	Singer
Kategori:	Symaskine
Model:	Heavy Duty 6600C

Har du brug for hjælp?

Hvis du har brug for hjælp til Singer Heavy Duty 6600C stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Symaskine Singer Manualer

Singer Futura 430 Manual

8 September 2025

Singer Damppresser Manual

7 September 2025

Singer Needle Guide Manual

22 August 2025

Singer C5900 Manual

1 August 2025

Singer C620L Manual

1 August 2025

Singer M2505 Manual

1 August 2025

Singer Stylist 9100 Manual

1 August 2025

Singer Heavy Duty HD6605C Manual

30 Juni 2025

Singer HD 6705C Manual

31 Maj 2025

Singer Little Touch & Sew 67A Manual

5 Februar 2025

Symaskine Manualer

Nyeste Symaskine Manualer

Bernette b68 Maker Manual

3 Oktober 2025

Necchi N 422 Manual

28 September 2025

Necchi L234A Manual

27 September 2025

Necchi Prima 263 Manual

27 September 2025

Necchi NC-103D Manual

27 September 2025

27 September 2025

27 September 2025

27 September 2025

27 September 2025

Necchi NC-204D Manual

27 September 2025