SkyRC SK-600066 Manual

SkyRC Ikke kategoriseret SK-600066

Læs gratis den danske manual til SkyRC SK-600066 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 6 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 3.5 anmeldelser. Har du et spørgsmål om SkyRC SK-600066, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

The SKYRC engine heater uses technology similar to that used by Formula 1, Indy Car

and NASCAR Teams! It will properly pre-heat your engine to 60-70°C in 10 minutes

based on ambient temperature.

SKYRC engine heater will pre-heat all the critical parts of your nitro engine, giving you a

minimal of stress and wear on the engine. It help relieve the stress on the crank, con-rod,

piston and sleeve during warm-up. It also give you a very easy and smooth engine start,

with no stress on your starterbox. Fuel consumption is much less, as you do not have to

spend time warming up and adjusting your engine. A pre-heatet glow-plug will increase

the life of your plug. It is also perfect for break-in, as it reduces the "pinch" on your new

engine. You will experience that engine pre-heating is a must. Most importantly, it will

quickly pay for itself by increasing engine life and performance!

INSTRUCTION MANUAL

INTRODUCTION

ENGINE HEATER

LED Indicator

Power ON/OFF

Button

MCU control heating time and heating power for maximum safety.

Safety timer: turn off power around 10 minutes automatically

Built-in temperature sensor: to control the output power of the heater

LED indicator for status of engine heater.

12V DC source with low voltage cutoff.

Fireproof and heat resistant adjustable cover.

Fits all .19-.26 RC nitro engines.

Very small, lightweight and compact for quick and easy storage.

It's designed to transfer heat effectively and efficiently.

Access port on top allows you to start and monitor your engines temperatures without

having to take the heater off.

FEATURES

HOW TO USE

Place the heater around your engine.

Connect the power cord to DC Source: Can be operated from any 12V DC power source,

including 3S LiPo battery or 12V Lead Acid battery.

Push power button. The LED turn red and the engine heater will starting heat the engine up to

10 minute and the engine is pre-heated. If the temperature is not reach the optimal temperature

range, push the power button for another 10 minutes heating.

You can turn off the heater during heating process, push and hold power button for more than 3

seconds, the heater will stop.

Disconnect the DC source and take it off the engine. Caution, the heater and engine are HOT.

Now you are ready to start your pre-heated engine.

NEVER HAVE POWER ON THE HEATER, IF IT IS NOT MOUNTED ON THE ENGINE.

IT CAN OVERHEAT.

Warning:

SAFETY NOTES

Before using this product, make sure that the heat element/cord/plug and switch are in perfect

conditions. If damaged do NOT use it.

Do not pull on the cord. Please do not bend or twist the cord.

NEVER leave the heater on, if you are not present.

Always unplug the heater before starting your engine.

Never refuel your car with he heater connected.

Leave the heater in a safe area. After use, the heater is still very hot.

This is an electrical product; it can result in dangerous shock and fire. Please use this product with

care.

SPECIFICATION

Input Voltage

Heating Power

Heating Time

Low Voltage Cutoff

Net weight

Dimension

12Volt DC

90Watt

Around 10 minutes

9-10Volt

65g

Diameter 63mm Height 50mm≈ ≈

LED indicator

Red LED stays on

Red LED blinking

Heating

Low Voltage

SK-600066

7504-0439-02

Produkt Specifikationer

Mærke:	SkyRC
Kategori:	Ikke kategoriseret
Model:	SK-600066

Har du brug for hjælp?

Hvis du har brug for hjælp til SkyRC SK-600066 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret SkyRC Manualer

SkyRC B6 Lite Manual

7 December 2025

SkyRC SK-500040 Manual

7 December 2025

SkyRC eFuel 1200W Manual

7 December 2025

SkyRC SK-600066 Manual

7 December 2025

SkyRC RTS001 Manual

7 December 2025

SkyRC SK-500039 Manual

7 December 2025

SkyRC Super mini BEC 10A Manual

10 August 2024

SkyRC SK-500009 Manual

6 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

ClearOne Versa USB22D Manual

7 December 2025

MDT BE-TAL550206.B1 Manual

7 December 2025

Klarfit Miri Manual

7 December 2025

SmallRig 4403B Manual

7 December 2025

SmallRig 4704 Manual

7 December 2025

Bosch BP350 Professional Manual

7 December 2025

Bosch T1657 Professional Manual

7 December 2025

Opticis DPFX-250-TR Manual

7 December 2025

Fostex FE166NV Manual

7 December 2025

Fostex SL-M220 Manual

7 December 2025