Somfy inteo Centralis indoor RTS2 Manual

Somfy Diverse inteo Centralis indoor RTS2

Læs gratis den danske manual til Somfy inteo Centralis indoor RTS2 (4 sider) i kategorien Diverse. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Somfy inteo Centralis indoor RTS2, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
CENTRALIS indoor RTS is a radio receiver for AC motor compatible with the RT and
RTS controls : Centralis RTS / Telis 1 RTS / Telis 4 RTS / INIS RT.
• Up to twelve controls can be memorized together in the memory of CENTRALIS
indoor RTS allowing individual, group and master commands.
• Two intermediate positions can be programmed.
inteo Centralis indoor RTS2
INSTALLATION
guide
Ref.182214C
80 mm
80 mm
45 mm
•Supply : 220-240V 2,5A 50/60Hz
•Fuse : 3,15A
•Output timing : 3 minutes.
•Frequency : 433.42 MHz
•Protection index : IP30
•Temperature : +5°C to +40°C
•Class II product
•Supply :100-120V 5A 50/60Hz
•Fuse : 6,3A
•Output timing : 3 minutes.
•Frequency : 433.42 MHz
•Protection index : IP30
•Temperature : +5°C to +40°C
•Class II product
Installation allowed only by authorized electrician.
Before connecting the unit, read the instructions carefully.
We reserve the right to make changes due to technical improvements.
SOMFY SAS, capital 20.000.00 Euros, RCS Bonneville 3033.970.230
1
Centralis indoor RTS2
Mounting2.1
1
Characteristics
2
Installation
Centralis indoor RTS2 can either be placed in a 50 mm inset mounting box (60 mm spacing) or surface mounted.
The range of radio control is limited by laws regulating radio devices and by building design. When planning, please ensure that there is adequate radio
reception.
Recommandation of mounting in order not to affect quality of reception :
minimum distance between Centralis indoor RTS2 and the floor : 1,5 m.
minimum distance between a Centralis indoor RTS2 and a radio transmitter : 30 cm.
minimum distance between two Centralis indoor RTS2 :20 cm.
Centralis indoor RTS2 should not be installed in the immediate vicinity of metal surfaces. Powerful local transmitter equipment (e.g. cordless head-
phones) with a transmission frequency identical to the Centralis indoor RTS2 can affect its function.
Hereby, SOMFY, declares that this equipment is in
compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
A Declaration of Conformity is available at the web
address www.somfy.com Heading CE
fuse
R
PROG
▲,S,▼,S
LED
Programing
button
Built-in manual
security control
Centralis indoor RTS2 240V Centralis indoor RTS2 120V
usable in EU, CH
We reserve the right to make changes due to technical improvements.
SOMFY SAS, capital 20.000.00 Euros, RCS Bonneville 3033.970.230
Centralis indoor RTS2
2
with a RTS control (Centralis RTS ; TELIS).
1. remove
the battery
2. press shortly
the push button
4. press shortly
the push button
3. replace
the battery
+
F D K
LITHIUM BATTERY
CR 2430
3V
+
F D K
LITHIUM BATTERY
CR 2430
3V
Inis RT
The LED of Centralis indoor RTS2
blinks indicating that the address of
the transmitter is memorized in the
receiver which automatically quits its
programming mode.
Press the PROG button of Centralis
indoor RTS2 until the LED lights.
Centralis indoor RTS2 is set in pro-
gramming mode for one minute, ready
to receive the address of a control
(After one minute, the LED will go out).
R
PROG
▲,S,▼,S
Press shortly the programming
button on the RTS control.
3V
LITHIUM
RENATA
CR 2430
S
W
I
S
S
M
A
D
E
3V
LITHIUM
RENATA
CR 2430
Inis RT
with an INIS RT.
➭
Wiring2.2
3 x 1,5 mm2
Ground
Ground
4 x 0,75 mm2
SUPPLY
Phase
Neutral
•disconnect the mains before carrying out any work.
•ensure that no forces act on the screw terminals after installation.
3
Radio programming
First programming3.1
➭
Neutral
Ground
SUPPLY
Phase
LT motor
N
®
®®
▼▲NN L
LLive.
N Mains Neutral.
NMotor neutral .
▲UP direction.
▼DOWN direction.
WARNING : if the roller shutter moves DOWN when pressing the UP button of the RTS controls, invert the
brown and black motor wires.
Screw the flush mounting box
onto the wall.
Screw the support on the box. Complete the cabling and clip
the receiver on the support.
Clip the front cover.
RECESSED mounting
Screw the support on the
recessed box.
Complete the cabling and clip
the receiver on the support.
Clip the front cover.
SURFACE mounting
2 x
2 x 2 x

Produkt Specifikationer

Mærke: Somfy
Kategori: Diverse
Model: inteo Centralis indoor RTS2

Har du brug for hjælp?

Hvis du har brug for hjælp til Somfy inteo Centralis indoor RTS2 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Diverse Somfy Manualer

Somfy

Somfy Telis Lounge Manual

4 Oktober 2024
Somfy

Somfy relaiskast RK2 Manual

21 September 2024
Somfy

Somfy Telis 1 Modulis RTS Silver 1810975 Manual

19 September 2024
Somfy

Somfy Ondeis Manual

19 September 2024
Somfy

Somfy Telis 4 Modulis RTS Pure 1810765 Manual

19 September 2024
Somfy

Somfy KEYPAD METAL RTS Manual

24 August 2024
Somfy

Somfy Keytis 4 RTS Manual

24 August 2024
Somfy

Somfy Berlin Manual

23 August 2024
Somfy

Somfy CENTRALIS RTS Manual

21 August 2024
Somfy

Somfy SLT 60 Manual

20 August 2024

Diverse Manualer

Nyeste Diverse Manualer

AL-KO

AL-KO AKS 1300 Manual

15 Januar 2025
Schavis

Schavis CIRCLE DUO X-LINE Manual

13 Januar 2025
Schavis

Schavis INDOOR DUO X-LINE Manual

13 Januar 2025
Schavis

Schavis INDOOR DUO Manual

13 Januar 2025
ION

ION ICADE CORE Manual

13 Januar 2025
BeamZ

BeamZ 150.460 - Panther 25 Manual

11 Januar 2025
Walkera

Walkera Goggle 3 Manual

15 Oktober 2024
Walkera

Walkera Goggle 4 Manual

15 Oktober 2024
Navman

Navman NavBus Manual

5 Oktober 2024
Trelock

Trelock LS 320 Manual

5 Oktober 2024