Speco Technologies O4iT2W Manual

Speco Technologies Overvågningskamera O4iT2W

Læs gratis den danske manual til Speco Technologies O4iT2W (53 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Speco Technologies O4iT2W, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/53

User Manual

4MP IP Camera

O4iB2/O4iB2M/O4iD2/ O4iD2M/ O4iT2/ O4iT2M/O4iT2W

Please read this manual carefully before operating the unit and keep it for further reference

Important Safeguards and Warnings

1. Electrical safety

All installation and operation here should conform to local electrical safety codes.

Use a certified/listed 12VDC/24VAC (depending on models) Class2 or adequate PoE switch.

Improper handling and/or installation could run the risk of fire or electrical shock.

2. Environment

Do not expose the unit to heavy stress, violent vibration or long-term exposure to water and humidity during transportation,

storage, and/or installation.

Do not install near sources of heat.

Only install the product in environments inside the specification operating temperature and humidity range.

Do not install the camera near power lines, radar equipment or other electromagnetic radiation.

Do not block any ventilation openings if any.

Use all the weatherproofing hardware requirement to minimize weather intrusion.

3. Operation and Daily Maintenance

Please shut down the device and then unplug the power cable before you begin any maintenance work.

Do not touch the CMOS sensor optic component. You can use a blower to clean the dust on the lens surface.

Always use the dry soft cloth to clean the device. If there is too much dust, use a cloth dampened with a small quantity of neutral

detergent. Finally use the dry cloth to clean the device.

Please use a professional optical cleaning method to clean the enclosure.

The grounding holes of the product are recommended to be grounded to further enhance the reliability of the camera.

Dome cover is an optical device, please do not touch or wipe cover surface directly during installation and use, please refer to the

following methods if dirt is found.

Stained with dirt:

Use oil-free soft brush or hair dryer to remove it gently.

Stained with grease or fingerprint.

Use oil-free cotton cloth or paper soaked with alcohol or detergent to wipe from the lens center outward. Change the cloth and

wipe several times if it is not clean enough.

Produkt Specifikationer

Mærke:	Speco Technologies
Kategori:	Overvågningskamera
Model:	O4iT2W

Har du brug for hjælp?

Hvis du har brug for hjælp til Speco Technologies O4iT2W stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Overvågningskamera Speco Technologies Manualer

Speco Technologies HT61ILHB Manual

8 Oktober 2025

Speco Technologies O4iT2W Manual

8 Oktober 2025

Speco Technologies O8FT1W Manual

8 Oktober 2025

Speco Technologies N4NRL Manual

8 Oktober 2025

Speco Technologies O8B9 Manual

8 Oktober 2025

Speco Technologies D16WHT12TB Manual

8 Oktober 2025

Speco Technologies N8WNU Manual

8 Oktober 2025

Speco Technologies N4WNXL Manual

8 Oktober 2025

Speco Technologies D8WDSM Manual

8 Oktober 2025

Speco Technologies D4WVTPM1TB Manual

8 Oktober 2025

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer

Blow H-263 Manual

8 Oktober 2025

Blow H-442 4G Manual

8 Oktober 2025

Luminys N3T-8LA2 Manual

8 Oktober 2025

Luminys N3T-4LA2 Manual

8 Oktober 2025

FLIR Ariel CM-3508 Manual

8 Oktober 2025

Luminys N4T-4VA2 Manual

8 Oktober 2025

Luminys N3D-8LA2 Manual

8 Oktober 2025

AVMATRIX EAGLE P20 4K Manual

7 Oktober 2025

Luminys N5T-12LA2 Manual

7 Oktober 2025

Luminys N3D-4LAV Manual

7 Oktober 2025