Speco Technologies O5LB1 Manual

Speco Technologies Overvågningskamera O5LB1

Læs gratis den danske manual til Speco Technologies O5LB1 (54 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Speco Technologies O5LB1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/54

User Manual

Full-Color

5MP White Light Intensifier IP Camera

O5L /O5LB1 T1

Please read this manual carefully before operating the unit and keep it for further reference

Important Safeguards and Warnings

1. Electrical safety

All installation and operation here should conform to local electrical safety codes.

Use a certified/listed 12VDC Class2 power supply only.

Please note: Do not connect two power supplying sources to the device at the same time; it may result in device damage! The

product must be grounded to reduce the risk of electric shock.

Improper handling and/or installation could run the risk of fire or electrical shock.

2. Environment

Heavy stress, violent vibration or exposure to water is not allowed during transportation, storage, and installation.

This product should be installed in a cool, dry place away from direct sunlight and heat sources.

Do not install the product in extreme temperature conditions.

Do not expose the camera to electromagnetic radiation. it may result in CMOS sensor failure.Otherwise,

Do not block any ventilation openings.

Do not allow water and liquid intrusion into the camera.

3. Operation and Daily Maintenance

Please shut down the device and then unplug the power cable before you begin any maintenance work.

Do not touch the CMOS sensor optic component. You can use a blower to clean the dust on the lens surface.

Always use the dry soft cloth to clean the device. If there is too much dust, use a cloth dampened with a small quantity of neutral

detergent. Finally use the dry cloth to clean the device.

Please use a professional optical cleaning method to clean the enclosure. Improper enclosure cleaning (such as using cloth) may

result in poor IR functionality and/or IR reflection.

The grounding holes of the product are recommended to be grounded to further enhance the reliability of the camera.

Dome cover is an optical device, please touch or wipe cover surface directly during installation and use, please refer to the do not

following methods if dirt is found.

Stained with dirt:

Use oil free soft brush or hair dryer to remove it gently.-

Stained with grease or fingerprint.

Use oil cloth or paper soaked with alcohol or detergent to wipe from the lens center outward. Change the cloth and - free cotton

wipe several times if it is not clean enough.

Produkt Specifikationer

Mærke:	Speco Technologies
Kategori:	Overvågningskamera
Model:	O5LB1

Har du brug for hjælp?

Hvis du har brug for hjælp til Speco Technologies O5LB1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Overvågningskamera Speco Technologies Manualer

Speco Technologies O5LB1 Manual

12 Januar 2025

Speco Technologies O8B7M Manual

11 Januar 2025

Speco Technologies O2VLB7 Manual

3 September 2024

Speco Technologies VLDT3GM Manual

20 August 2024

Speco Technologies CVC624WDR Manual

19 August 2024

Speco Technologies O4iB2M Manual

18 August 2024

Speco Technologies ZIPTW4B1 Manual

18 August 2024

Speco Technologies O2ID21M Manual

17 August 2024

Speco Technologies Intensifier 2 CVC6246iHR Manual

17 August 2024

Speco Technologies O4DT1 Manual

17 August 2024

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer

xmartO EPS8084 Manual

15 Juni 2025

Tracer Guard 4 Manual

15 Juni 2025

Marshall CV730-WH Manual

15 Juni 2025

xmartO WYS3084 Manual

15 Juni 2025

Sony SNC-XM632 Manual

15 Juni 2025

Tracer Focus 3 Manual

15 Juni 2025

Marshall CV605-BK Manual

15 Juni 2025

IDIS DC-S6281FX Manual

15 Juni 2025

Marshall CV630-NDIW Manual

15 Juni 2025

Marshall CV730-ND3W Manual

15 Juni 2025