Please follow installation steps as below:
Please check the following items before installation, if it is missing, please contact the dealer.
Ethernet Switch 1pc
Power Adapter 1pc
AC Power Cable 1pc
Accessory 1pc
User Manual 1pc
1) Turn off the power of all the related devices before the installation; otherwise the device would be
damaged;
)
)
4)
5)
6)
2 Connect PoE cameras with 1~8 downlink ports of product by Ethernet cable;
3 Connect UPLINK port of product with NVR or PC by Ethernet cable;
Connect power adapter;
Check if the installation is correct, equipment is in good condition, the connection is stable,then
power on for system;
Ensure the Ethernet equipment with power on can work properly.
Installation Steps
Features
1
2
Board Diagram
Main Function:
P
rovide 8*10/100/1000Base-T Ethernet ports(PoE) ,1* 10/100/1000BASE-T
Ethernet ports and 1*gigabit SFP ports;
Complies with standards: IEEE802.3 、IEEE802.3u、IEEE802.3ab、IEEE802.3z、 IEEE802.3X、
IEEE802.3af/at;
PoE Power Supply: With 8x gigabit PoE RJ45 ports, each port supports max. 30W PoE power, total
unit has 120W PoE power;
One-key CCTV: Quickly achieve isolation among downlink ports, effectively restrain network storm,
improve network feature;
Protection: Support 6KV surge immunity, EFT testing standard;
Operation Environment: Support -10℃~45℃ wide-temperature;
Operation: Plug&play, convenient to use, support desktop, wall-mounted installations.
Application
The transmission distance depends on the signal source and cable quality; standard Cat5e/6
Ethernet cable is strongly suggested for reaching the maximum transmission distance!
Notice
1) Device must be connected with lightning protection grounding; otherwise protection level will be
greatly reduced; please use above No.20 wire to connect the grounding terminal;
2) The device requires rebooting after the dial switch has been utilized.
Side Board
Kensington Security Slot
Back Board
Front Board
8 Ports Full Gigabit PoE Ethernet Switch
ing and other
occasions.
8 Ports Full Gigabit PoE Ethernet Switch
Ethernet access and PoE applications. It provides eight Gigabit downlink ports, one Gigabit uplink
Ethernet port, and one Gigabit optical SFP module slot. The eight downlink ports support 802.3af/at
standard and feature Max. 30W PoE power output of single port, Max. 120W of whole machine. The
device supports one-key VLAN which isolates the communication between downlink and uplink
ports. It can be widely used in security surveillance, hotels, schools, SMB engineer
is an unmanaged Ethernet switch designed for Gigabit
V1.0
CCTV-mode Toggle Switch
Power LED
Power Port
PoE Downlink Ethernet Ports
Uplink Ethernet Port
Uplink Optical Port
Grounding
8 Ports Full Gigabit PoE Ethernet Switch
User Manual
Notice
Cat5e/6
PoE Camera
PoE Camera
PoE Camera
LCD
NVR
Power
8 Ports Gigabit PoE Switch
Fiber
PoE Camera
Media Convete
r
P8S9G
