Speco Technologies ZIPT4B1 Manual


Læs gratis den danske manual til Speco Technologies ZIPT4B1 (26 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Speco Technologies ZIPT4B1, eller vil du spørge andre brugere om produktet?

Side 1/26
User Guide (Ver. 1.1)
Model: D4VX, D8VX, D16VX
4, 8 & 16 Channel HD TVI Digital Video Recorder
About the User’s Guide
Before operating the unit, please read this user’s guide thoroughly and retain it for future reference.
11
2. Initial Boot up Process
2-1. Initial Boot up and Basic Time Setup
1. During the first boot up, the following logo and message will be displayed.
2. After the logo, select the language as specified below.
1) User has to set a password before using.
Can not use ‘1111 when the initial boot up password set.
But user can set 1111’ as a password through [Setup > User Management > Password Setup]
2) DVR will not proceed when user put the password ‘1111’.
(EZ Setup Page Reference, Page 16-17)
2-2. Setting Daylight Saving Time
To enable Daylight Saving feature/NTP synchronization, take the following steps.
1. Enter the Setup mode. The default Username is “admin” and enter a password set on the initial
boot-up process.


Produkt Specifikationer

Mærke: Speco Technologies
Kategori: Overvågningskamera
Model: ZIPT4B1

Har du brug for hjælp?

Hvis du har brug for hjælp til Speco Technologies ZIPT4B1 stil et spørgsmål nedenfor, og andre brugere vil svare dig