IMPORTANT SAFEGUARDS
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance.
Always read and obey all safety messages.
This is the Safety Alert Symbol. This symbol alerts you to potential
hazards that can kill or injure you and others. All safety messages will
follow the Safety Alert Symbol and either the w o ” ” rd DANGER or
“ ”. WARNING
D ANGER means that failure to heed this
safety statement may result in severe
personal injury or death.
W ARNING means that failure to heed
this safety statement may result in
extensive product damage, serious
personal injury, or death.
S s afety message will alert you to what the potential hazard is, tell you how to reduce the chance
of injury, and let you know what can happen if the instructions are not followed.
Before the r is used, it must be properly positioned and installed refrigerato
as described in this manua so read the manual carefully. To reduce the l,
risk of fire, electrical shock or injury when using the refrigerator, follow
basic precaution , including the following:s
• - o aPlug into a grounded 3 prong outlet. D not remove grounding prong, do not use an ad pter,
and do not use an extension cord.
• r, It is recommended that a separate circuit, serving only your refrigerato be provided. Use
receptacles that cannot be turned off by a switch or pull chain.
• r Never clean r parts with flammable fluids. These fumes can create a fire hazard orefrigerato
explosion. And do not store or use gasoline or other flammable vapors and liquids in the
vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
• . Do not connect or disconnect the electric plug when your hands are wet
• Unplug the refrigerato the r or disconnect power before cleaning or servicing. Failure to do so
can result in electrical shock or death.
• Do not attempt to repair or replace any part of your refrigerato specifically r unless it is
recommended in this material. All other servicing should be referred to a qualified technician.
