Sun Joe SBJ801E-RM Manual

Sun Joe Støvsuger SBJ801E-RM

Læs gratis den danske manual til Sun Joe SBJ801E-RM (20 sider) i kategorien Støvsuger. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 23 anmeldelser. Har du et spørgsmål om Sun Joe SBJ801E-RM, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

A Division of Snow Joe®, LLC

OPERATOR’S MANUAL

Model SWJ801E Form No. SJ-SWJ801E-880E-M

RELECTRIC POLE CHAIN SAW

8-INCH | 7-AMP

Let Gravity Do The Work®

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

mDANGER! This indicates a hazardous situation, which,

if not followed, will result in serious injury or death.

mWARNING! This indicates a hazardous situation, which,

if not avoided, could result in serious injury or death.

mCAUTION! This indicates a hazardous situation, which,

if not avoided, could result in minor or moderate injury.

General Safety

mWARNING! When using electric yard tools, basic safety

precautions should always be followed to reduce the risk of

re, electric shock, and personal injury, including the following:

1. Keep guards in place – Protective guards should be

checked periodically to ensure they are properly tted and

in correct working order.

2. Remove adjusting keys and wrenches – Check that

adjusting wrenches are removed from the saw before

turning it on.

3. Keep work area clean and well-lit – Clear work area of

branches and limbs after each cutting session. Cluttered

areas invite accidents.

4. Do not use in dangerous environments – Do not use the

pole chain saw in damp or wet locations.

5. Do not use the pole chain saw in the rain.

6. Keep bystanders and children away – All bystanders,

including children and pets, should be kept a safe

distance away from the work area.

7. Do not force the tool – It will do the job eectively and

safely if it is used at the rate for which it was designed.

8. Use the right tool – Do not force the tool or any

attachment on the tool to do a job for which they were

not designed.

9. Wear proper apparel – Do not wear loose articles of

clothing or jewelry since such items may get caught

in moving parts. Use of heavy-duty rubber gloves,

substantial non-skid footwear, and close-tting clothing is

recommended when working outdoors with power tools.

10. Wear protective hair coverings to contain long hair.

11. Always wear safety glasses and ear defenders to

provide eye and ear protection – Everyday eyeglasses

only have impact resistant lenses and do not provide the

same protection as safety glasses.

12. Wear face or dust masks – If the cutting operation is

dusty, the use of a face or dust mask specially designed

to lter out microscopic particles is recommended.

13. Do not overreach – Keep proper footing and balance

at all times.

14. Maintain tools with care – Keep tools sharp and clean

for best and safest performance. Follow instructions for

lubricating and changing accessories.

15. Disconnect tool – Disconnect the pole chain saw from

the power supply when not in use, before servicing,

when transporting, or when changing the chain or other

accessories.

16. Reduce the risk of unintentional starting – Make sure

the switch is in the OFF position before plugging the tool

into a power source.

17. Use recommended accessories – Consult the owner’s

manual for recommended accessories. The use of

improper accessories may cause risk of injury.

18. Check for damaged parts – Before each use, repair or

replace any guard or part that is damaged. In addition,

check for alignment of moving parts, binding of moving

parts, breakage of parts, and any other conditions that

may aect the tool's operation.

19. Never leave tool unattended while it is running – Turn

the power OFF by removing the power cord directly from

its socket. Do not leave the saw until the cutting chain

comes to a complete stop.

20. Avoid unintentional starting – Do not carry the pole

chain saw with your nger on the switch.

21. Do not grasp the exposed cutting blade or cutting

edges when picking up or holding the saw – Be sure to

encase the cutting bar in its protective sheath when not

in use.

22. Stay alert – Watch what you are doing. Use common

sense. Do not operate the pole chain saw when you are

tired.

23. Store idle tool indoors – When not in use, appliances

should be stored indoors in a dry and high or locked-up

place out of the reach of children.

Electrical Safety

1. Ground fault circuit interrupter (GFCI) protection should

be provided on the circuit(s) or outlet(s) to be used for

the pole chain saw. Receptacles are available having

built-in GFCI protection and may be used for this

measure of safety.

2. To prevent electric shock, use only with an extension cord

suitable for outdoor use, such as SW-A, SOW-A, STW-A,

STOW-A, SJW-A, SJOW-A, SJTW-A, or SJTOW-A.

Before use, check that the extension cord is in good

condition. When using an extension cord, make sure to

use one heavy enough to carry the current your product

will draw. For lengths less than 50 ft (15 m), a No.16 AWG

(or greater) extension cord should be used. An undersized

cord will cause a drop in line voltage resulting in loss of

power and overheating.

3. To reduce the risk of electric shock, this appliance has

a polarized plug (i.e. one blade is wider than the other).

Use this appliance only with a polarized UL-, CSA-, or

ETL-rated extension cord for outdoor, all-weather use.

The appliance plug will t into a polarized extension

cord only one way.

If the appliance plug does not t fully into the extension

cord, reverse the plug. If the plug still does not t, obtain

a correct polarized extension cord. A polarized extension

cord will require the use of a polarized wall outlet. The

extension cord plug will t into the polarized wall outlet

only one way. If the plug does not t fully into the wall

outlet, reverse the plug. If the plug still does not t,

contact a qualied electrician to install the proper wall

outlet. Do not modify the appliance plug, extension cord

receptacle, or extension cord plug in any way.

4. To prevent the appliance cord from disconnecting from

the extension cord during operation, use the cord restraint

hook and/or make a knot with the two cords as shown in

Table 1.

5. Do not abuse the cord. Never pull the pole chain saw

by the cord or yank the cord to disconnect it from the

receptacle. Keep the cord away from heat, oil, and

sharp edges.

Specic Safety Rules For

Pole Chain Saws

mWARNING! To protect yourself SHOCK HAZARD! –

from electrocution, do not operate the pole chain saw within

50 ft (15 m) of overhead wires. Failure to follow this instruction

could result in severe personal injury.

Operating Tips For Pole Chain Saws

• Stay alert. Use common sense while operating the unit.

• Keep work area clean and well-lit. Cluttered areas invite

accidents.

• Do not use the pole chain saw in bad weather condition,

especially when there is a risk of lightning.

• Note the extension cord's location relative to the tool.

While operating the pole chain saw, be careful not to trip

over the cord.

• Keep the cord away from the chain and the operator at

all times.

• Hold the pole chain saw by insulated gripping surfaces

only. A saw chain contacting a "live" wire may make the

exposed metal parts of the pole chain saw "live" and

could give the operator an electric shock.

• Keep children, animals, and bystanders a safe distance

away from the pole chain saw and extension cord.

• Only the pole chain saw operator should be in the

work area.

• Do not use the pole chain saw to cut down trees.

m WARNING! m

Electric shock may cause SEVERE INJURY or

DEATH. Heed these warnings:

• Do not allow any part of the pole chain saw to make

contact with water while it is in operation. If the

appliance becomes wet while turned o, wipe dry

before starting.

• Use only a UL-, CSA-, or ETL-rated extension cord

for outdoor, all-weather use.

• Do not use an extension cord over 100 ft (30 m).

• Do not touch the appliance or its plug with wet hands

or while standing in water. Wearing rubber boots

oers some protection.

EXTENSION CORD CHART

Cord Length:

Min. Wire Gauge (A.W.G.):

Up to 50 ft

(15 m)

+50 ft - 100 ft

(+15 m - 30 m)

(B) Connect plug and receptacle

Cord set Appliance cord

(A) Tie cord as shown

Table 1. Method of Securing Extension Cord

Produkt Specifikationer

Mærke:	Sun Joe
Kategori:	Støvsuger
Model:	SBJ801E-RM

Har du brug for hjælp?

Hvis du har brug for hjælp til Sun Joe SBJ801E-RM stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Støvsuger Sun Joe Manualer

Sun Joe SWD2500 Manual

10 Oktober 2024

Sun Joe 24V-X2-OGV-CT-RM Manual

5 August 2024

Sun Joe SWD6600-RM Manual

2 August 2024

Sun Joe SWD4000-RM Manual

31 Juli 2024

Sun Joe SWD5000 Manual

29 Juli 2024

Sun Joe ATJ-V501 Manual

29 Juli 2024

Sun Joe SWD2500-RM Manual

26 Juli 2024

Sun Joe SBJ802E-RED-RM Manual

24 Juli 2024

Sun Joe SWD4000 Manual

23 Juli 2024

Sun Joe 24V-X2-BVM143-LTE-RM Manual

13 Juli 2024

Støvsuger Manualer

Nyeste Støvsuger Manualer

Bush V18P01EP29EU Manual

2 August 2025

Gorenje VC2324GPRA Manual

2 August 2025

Severin HV 7155 Manual

1 August 2025

Amica VM 3011 EOS Manual

1 August 2025

Amica Akman VM 4014 Manual

1 August 2025

Amica Viento VI 2021 Manual

1 August 2025

Eibenstock WRS 50 Manual

1 August 2025

Grundig VCW 4270 L Manual

1 August 2025

RYOBI VC-25HD Manual

1 August 2025

Grundig VCC 6250 ECO Manual

1 August 2025