SVAN SVCF6080 Manual

SVAN Emhætte SVCF6080

Læs nedenfor 📖 manual på dansk for SVAN SVCF6080 (30 sider) i kategorien Emhætte. Denne guide var nyttig for 21 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/30

HOOD USER GUIDE

ENGLISH

Assembly instructions

CAMPANA GRUPO FILTRANTE 60CM BLANCA_SVCF6080

Read this manual prior to performing any task!

1, en_US

This device is designed exclusively for domestic use.

SVAN TRADING SL CIUDAD DE CARTAGENA 20 (FUENTE DEL

JARRO) PATERNA 46988 VALENCIA Spain

Telephone: +34 960 600 034

11.03.2019HOOD USER GUIDE ENGLISH2

1 Technical Drawing

252

248

87,5

280

298

535 / 835

555 / 855

400

312

Abluftstutzen Ø150

17.8

Fig. 1

Technical Drawing

11.03.2019HOOD USER GUIDE ENGLISH4

2 WARNING AND SAFETY PRECAUTIONS

nThis appliance can be used by children of 8 years and older,

people with physical, sensory or mental capability deficiency or

people with lack of experience or knowledge; as long as they

are provided supervision or instructions for the safe use of the

appliance and they comprehend the dangers.

nChildren should not tamper with the appliance. Cleaning and

user maintenance operations must not be performed by chil-

dren unless supervised.

nThis product is designed for home use.

nUsage voltage of your product is 220-240 Volt~50-60 Hz.

nPower cord of your product is fitted with a grounded plug. This

cord must be plugged into a grounded outlet.

nThe whole electrical wiring must be installed by a qualified

electrician.

nInstallation by unauthorized persons could lead to poor opera-

tion performance, damage to the product, and accidents.

nFeeder cable of the appliance mustn't be exposed to jamming

or crashing during assembly. Feeder cable mustn't be placed

near the cooker. In such cases, it might melt down and lead to

fire.

nDo not plug in the appliance before the installation.

nMake sure that the installation place allows the user to easily

unplug the power cable in case of any danger.

nDo not touch your product's lamps when they work for a long

time. The lamps may burn your hand as they will be hot.

nKitchen hoods are manufactured for household use in normal

home cooking. There is a risk of malfunction in other types of

use, and the product guarantee will be void.

nComply with the rules and instructions regarding discharge of

outgoing air, stipulated by the relevant authorities. (This

warning does not apply to uses without flue.)

nFlammable foods must not be cooked under the appliance.

nStart your product after you place pot, pan etc. on the stoves.

Otherwise, high temperature may cause same parts of your

products to deform.

nTurn off the cooker's burner before taking the saucepan, pan,

etc. off the cooker.

nDo not leave boiling oil on the stove. Pots that contain boiling

oil may catch fire by itself.

nSince oils could catch fire when you cook fried foods in partic-

ular, be careful about your curtains and tablecloths.

nEnsure timely replacement of the filters. Filters not replaced in

a timely manner pose risk of fire due to accumulated grease

deposits on them.

nDo not use non-fire-resistant filtering materials instead of the

filter.

nDo not operate your product without filter, and do not remove

the filters when the product is in operation.

nIn case of any fire, de-energize the hood and any other cooking

devices. (Plug off the appliance or turn off the main switch.)

WARNING AND SAFETY PRECAU-

TIONS

WARNING AND SAFETY PRECAUTIONS

11.03.2019 HOOD USER GUIDE ENGLISH 5

2.1 LETHAL RISK, DANGER OF POISONING

DANGER!

Warning - Choking Hazard

The packaging materials are dangerous for chil-

dren. Never allow children to play with packaging

materials.

DANGER!

Warning - Death Hazard

There are life-threatening danger and poisoning

danger due to reabsorbed combustion gases.

During the air discharge outlet use, unless suffi-

cient air supply is provided, do not use the appli-

ance simultaneously with devices that discharge

toxic gases through flue such as ventilated, gas,

oil, wood or coal burning heaters, shower heaters,

water heaters, etc.Fig. 2

Ventilated goods (e.g. gas, oil, wood or coal burning heaters,

shower heaters, water heaters) take combustion air from the instal-

lation location, and discharge the waste gas through a waste gas

system (e.g. flue). When the cooker hood is active, it absorbs air

from the kitchen and neighbouring rooms. If adequate air entry is

not provided, vacuum emerges. In such a case, the toxic gases are

absorbed from the flue and waste gas channel, and are taken into

to door again. Fig. 2

nTherefore, adequate fresh air ingress must always be

ensured.Fig. 3

Fig. 2: Poisoning Danger

Fig. 3

WARNING AND SAFETY PRECAUTIONS

LETHAL RISK, DANGER OF POISONING

11.03.2019 HOOD USER GUIDE ENGLISH 7

WARNING!

Fire danger!

– The oil residue in the oil filter may catch

fire.Clean the oil filter at least once every 3

months.Never operate the device without the

oil filter.

– The oil residue in the oil filter may catch fire.

Never work with open flame (ex. flambe) near

the device. The apparatus is allowed to be

installed near a solid fuel (e.g. wood or coal)

heater only if it has a non-removable cover. No

sparks should be scattered.

– Hot oils and fats catch fire easily. Hot oils and

fats should never be left unattended. Never try

to put out the fire with water. Turn off the

cooker. Kill the flames carefully using a cover,

fire blanket or a similar material.

– Gas operated cookers that do not have a

cooking pot on create high heat during opera-

tion. A ventilation device placed over the

cookers can be damaged or burned for this

reason. Operate gas cookers only when there

is a cooking pot on them.

– Operating multiple gas cookers simultaneously

creates high heat. A ventilation device placed

over the cookers can be damaged or burned

for this reason. Never operate two gas cookers

longer than 15 minutes on high flame setting. A

large burner over 5kW (Wok) has the power of

two gas burners.

WARNING!

Electrocution hazard!

– A malfunctioning device may cause electric

shock. Never turn on a malfunctioning device.

Pull the power plug and switch off the circuit

breaker. Call customer service.

– Unsuitable repairs pose hazards. Repairs and

replacement of damaged power cords must be

performed only by a customer services techni-

cian trained by us. If the device is malfunc-

tioning pull the power plug and switch off the

circuit breaker. Call customer service.

– Water leaking into the device may cause elec-

tric shock. High pressure or steam cleaners

must not be used.

WARNING AND SAFETY PRECAUTIONS

LETHAL RISK, DANGER OF POISONING

11.03.2019HOOD USER GUIDE ENGLISH8

DANGER!

Danger of physical injury!

– During the installation, there is a danger of

physical injury due to the sharp edges. Use

protective gloves throughout the installation

process of the appliance.

– Due to risk of dropping the appliance,

assembly of all safety bolts and covers must be

performed as specified in the user manual.

– Objects placed on the appliance may fall over.

Do not place any objects on the device.

– LED lights are very bright and may damage

eyes (Risk group 1). You must not look directly

at running LED lights for longer than 100 sec-

onds.

WARNING!

Risk of burn, risk of electric shock!

– Allow the appliance to cool before cleaning or

maintenance process. Switch off the fuse or

pull out the mains plug from the socket.

– There is risk of damage due to ingress of mois-

ture in the electronics. Do not clean the control

components with a wet cloth.

– The surface could be damaged due to a wrong

cleaning process. Clean stainless steel sur-

faces only in their brushing direction. Do not

use a stainless steel cleaner for the control ele-

ments.

– The surface could be damaged due to aggres-

sive and abrasive cleaning agents. Never use

aggressive and abrasive cleaning agents.

WARNING!

Dangers of fire and physical injury!

In case of repairing that is not performed according

to the rules or as required, turn off the fuse or

unplug the feeder cable of your appliance.

Repairing must be performed only by the author-

ized technical service or authorized experts.

NOTICE!

If the appliance is faulty or damages, turn off the

fuse or unplug the feeder cable of your appliance

and call the authorized service.

WARNING AND SAFETY PRECAUTIONS

LETHAL RISK, DANGER OF POISONING

11.03.2019 HOOD USER GUIDE ENGLISH 9

NOTICE!

If the feeder cable is damaged, it must be replaced

by its manufacturer or its authorized technical

service or any other personnel qualified at the

same level, in order to avoid any dangerous situa-

tion.

NOTICE!

When the bulbs of the device malfunction, switch

off the circuit breaker and unplug the device's

power plug from the socket. Replace the defective

bulbs immediately (leave bulbs to cool down first),

in order to protect the remaining bulbs against

overloading.

CAUTION!

Accessible components might be heated when

used with cooking devices.

DANGER!

Air outlet pipe of this appliance mustn't be con-

nected in the flue used to discharge the fume gen-

erated by devices that use gas or other fuels.

Damage reasons

CAUTION!

Damage hazard due to corrosion. Always run the

appliance to prevent condensate formation while

cooking. Condensates may cause corrosion

damage. Replace the malfunctioning lamp right

away to prevent overloading of other lamps. Mois-

ture intrusion in electronic parts poses a risk of

damage. Never clean the control elements with a

wet cloth. The surface could be damaged due to a

wrong cleaning process. Clean stainless steel sur-

faces only in their brushing direction. Do not use a

stainless steel cleaner for the control elements.

The surface could be damaged due to aggressive

and abrasive cleaning agents. Never use aggres-

sive and abrasive cleaning agents. There is a risk

of damage due to condensate liquid backflow.

Install the air exit canal with a small downward

inclination (1° inclination) from the appliance.

WARNING AND SAFETY PRECAUTIONS

LETHAL RISK, DANGER OF POISONING

11.03.2019HOOD USER GUIDE ENGLISH10

3 USAGE WITH AND WITHOUT CARBON FILTER

You can use this appliance in exhaust air mode

and ventilated air mode.

Exhaust air mode

The absorbed air is cleaned by the grease filters, and is discharged

through a piping system.Fig. 4

NOTICE!

Exhaust air must not be transferred to an active

smoke or waste gas flue; or a flue used for ventila-

tion of the places, where heat sources are

installed.

nIf you want to transfer exhaust air to an inactive smoke or

waste gas flue, you need to obtain permission from an author-

ized chimney sweep.

nIf exhaust air is discharged through the external wall, a tele-

scopic wall safe must be used.

Ventilated air mode

Absorbed air is cleaned by the grease filters and

an active carbon filter, and then it is transferred

back to the kitchen.Fig. 5

You need to install an active carbon filter, in order

to catch the substances, which cause stink in the

circulating air. Consult your authorized dealer to

know the different opportunities available for ena-

bling the appliance to function in circulating air

mode. You can buy the accessories required for

this process from the relevant outlets, authorized

technical service or online sales center.

Fig. 4: Air Outlet without Carbon Filter

Fig. 5: Air Circulation with Carbon

Filter

USAGE WITH AND WITHOUT CARBON FILTER

11.03.2019 HOOD USER GUIDE ENGLISH 11

4 REPLACEMENT OF CARBON FILTER

1. Removing the metal oil filters (Fig. 6).

2. Active carbon filter is placed on the rear side of the metal oil

filter Push it to the side to remove it.(Fig. 6).

3. Wash the active carbon filter in the dishwasher.

Active carbon filter may be washed 3 times.

Then the active carbon filter must be

replaced by a new one.

4. Place the active carbon filter in the dishwasher loosely and

steeply and without any other dishes.

5. Start a program with a maximum temperature of 55° C.

6. Let the active carbon filter to dry in open air for 24 hours or

40 minutes at 80° C.

7. Place the washed or new active carbon filter on the metal oil

filter.

Placing the active carbon filter

Fig. 6: Placing the active carbon filter

1 Active carbon filter

2 Fixing pin

3 Metal oil filter

4 Fixing holes for active carbon filter

Washing n a dishwasher

After cleaning

Placing the active carbon filter

REPLACEMENT OF CARBON FILTER

11.03.2019HOOD USER GUIDE ENGLISH12

5 CLEANING AND PREVENTIVE MAINTENANCE

CAUTION!

Cleaning and user maintenance of the appliance

shall not be performed by unattended children.

nThe surface could be damaged due to aggressive and abrasive

cleaning agents. Never use aggressive and abrasive cleaning

agents. Supply your cleaning and protective substances that

are appropriate for your appliance from the authorized tech-

nical service. Surface of appliance and control units are sensi-

tive to scratching.

nClean the surfaces with a soft and damp cloth, dish-washing

liquid or mild glass cleaning agent. Soften the dry, sticky dirt

with a damp cloth. Do not scrape!

nIt is not appropriate to use dry cloths, sponges that may

scratch, materials that require rubbing, and other aggressive

cleaning agents containing sand, soda, acid or chlorine.

nClean the stainless steel surfaces in their brushing direction

only.

nDo not use stainless steel cleaning agents and wet clothes for

control units. Cleaning of metal grease filters Used metal

grease filters retain the greasy particles in the moisture and

vapour generated in the kitchen. Clean the metal grease filters

about every three months, under normal use conditions (1 to 2

hours a day).

nDo not use excessively effective, acidic or alkaline cleaning

agents.

nFor cleaning the metal grease filters, clean the holder parts of

the metal grease filters in the appliance, with a damp cloth as

well.

nYou can clean the metal grease filters in the dishwasher or by

hand.

nDo not apply spray cleaning supplies directly to the product.

nDo not keep flammable and/or heavy decorative items on the

product.

5.1 Clean metal fat filter

If the product has carbon filter, remove the carbon filter on the

product prior to cleaning the aluminium filter. (Fig. 7).

CLEANING AND PREVENTIVE MAINTENANCE

Clean metal fat filter

11.03.2019 HOOD USER GUIDE ENGLISH 13

WARNING!

Risk of due to oilsediments in metal oil filter!

Risk of due to oilsediments in metal oil filter.

– Clean the metal oil filter at least every 2 weeks

or when the oil filter cleaning warning is dis-

played.

– Never operate the hood without a metal oil

filter.

The metal oil filter of the appliance keeps solid components (e.g.

oil or dust) in the kitchen vapour and greatly prevents contamina-

tion of the hood.

1. Open the side aspirator (Fig. 7/1).

NOTICE!

Material damage due to falling of the

metal oil filter!

3. Open the lock of the metal oil filter (Fig. 7/2) and ensure that

it will not fall.

4. Tilt the metal oil filter forward and lift it out (Fig. 7/2).

5. Clean the metal oil filter with hand or in the dishwasher.

NOTICE!

Material damage due to wrong detergent!

Soften the metal oil filter in hot water and clean it with a soft

brush.

7. Rinse the metal oil filter in hot water.

8. Place the metal oil filter in the dishwasher loosely and steeply

and without any other dishes.

9. Start a program with a maximum temperature of 55° C.

Colour changes may occur due to cleaning in

the dishwasher. They do not adversely affect

the function of the metal oil filter.

10. Allow the metal oil filter to dry on an absorbent coaster.

If the activated carbon filter is removed, rub it

again on the metal oil filter.

Removing the metal oil filters

Fig. 7: Removing the metal oil filters

Hand-cleaning

Washing n a dishwasher

After cleaning

CLEANING AND PREVENTIVE MAINTENANCE

Clean metal fat filter

11.03.2019HOOD USER GUIDE ENGLISH14

11. Place the metal oil filter in the product and open the filter lock

(Fig. 8/1)

12. Install the metal oil filter ( Fig. 8/1)

13. Close the side aspirator (Fig. 8/2).

You may have more than one metal oil filter

installed in your appliance. Clean other metal oil fil-

ters according to this instruction.

5.2 Washing in Dishwasher

In case of washing in dishwasher, a slight change might occur in

colour. This has no effect on the function of the metal grease filter.

nDo not clean too dirty metal grease filters together with utensils

in the dishwasher.

nPlace the metal grease filters loosely and freely in the dish-

washer. Metal grease filters must be placed in the dishwasher

without jamming.

5.3 Hand Wash

For stubborn dirts, you can use a special grease

solvent. You can buy such an agent from the

authorized sales centre.

– Soften the metal grease filters in a hot water

with dish-washing liquid.

– Use a brush for cleaning and wait for the liquid

in metal grease filters to flow off completely.

– Rinse the filters thoroughly after cleaning.

Placing the metal oil filters

Fig. 8: Placing the metal oil filters

CLEANING AND PREVENTIVE MAINTENANCE

Hand Wash

11.03.2019 HOOD USER GUIDE ENGLISH 15

6 APPLIANCE POSITION

Min.65 cm

Min.75 cm

Fig. 9: MIN-MAX INSTALLATION DIMENSIONS

After completing the installation of hood, the minimum distance

must be 65 cm between the product and any electric cooker; and

75 cm between it and any gas ranges or cookers burning other

fuels (Fig. 9).

APPLIANCE POSITION

11.03.2019HOOD USER GUIDE ENGLISH16

7 CLEANING AND PREVENTIVE MAINTENANCE

7.1 Installation and Unpacking of the Appliance

nCheck that your appliance is not deformed.

nReport the transport issues immediately to transport operator.

nAny faults encountered shall be reported to the dealer, too.

nDo not allow children to play the with packaging materials!

7.2 Recommendations for Energy Saving

nReplace the carbon filters on a regular basis.

nRegularly clean your aluminium filters. Since dirty filters would

block the air passage, you might have to use the appliance at a

higher speed.

nUse your product according to its normal speeds.

nUse at higher speed would cause an increase in the energy

consumption.

CLEANING AND PREVENTIVE MAINTENANCE

Recommendations for Energy Saving

11.03.2019 HOOD USER GUIDE ENGLISH 17

8 CONTENT OF PACKAGE

Fig. 10

1- Product

2- Space cover plate

3- Two 3.5x9.5 Screws

4- Ø150/125mm Plastic Flue Adapter

5- User Manual

6- Installation Template

7- INSULATION SPONGE

CONTENT OF PACKAGE

11.03.2019HOOD USER GUIDE ENGLISH18

9 OVERVIEW OF hood

1- Motor Cabin

2- Bottom Panel

3- Cooker Lighting

4- Control Panel

5- Lateral Absorption Plate/Glass

Fig. 11

OVERVIEW OF hood

11.03.2019 HOOD USER GUIDE ENGLISH 19

10 ASSEMBLY OF PRODUCT

nParts inside the appliance may have sharp edges. Use protec-

tive gloves (Fig. 12).

CAUTION!

– The furniture that the appliance will be

mounted on should be resistant to 90°C tem-

perature.

– The durability of the furniture that will be

mounted on should also be ensured after the

cutting operations have been completed.

– Particularly in thin plates the carrying capacity

and durability should be provided with suitable

support parts. Consider the weight of the appli-

ance by including additional loads. The rein-

forcing material used should be heat and mois-

ture resistant. The weight of the appliance is

specified in the label on the package.

– Clean the sawdust after cutting. Cover the cut

surfaces so that they are heat resistant and

waterproof.

– The cross-sectional surface angle to the

working plate should be 90°.

Hood measurements and safety distances

Fig. 12

ASSEMBLY OF PRODUCT

11.03.2019HOOD USER GUIDE ENGLISH20

1. Cut the surface of the hood to be mounted at the specified

dimensions. Observe the cutting measurements of the sur-

face where the cooker hood will be mounted on (Fig. 13).

(± 1mm) This indicates that the measurement

is 1 mm more or 1 mm less of the specified

measurement. Observe these for the

mounting surface to be cut.

Fig. 13

ASSEMBLY OF PRODUCT

11.03.2019 HOOD USER GUIDE ENGLISH 21

2. Cut the top cover of the cabinet to the specified size for the

air outlet chimney of the hood(Fig. 14) If the power cord

should pass in close proximity to the air discharge flue,

create a cross section for it.

3. Attach the insulation foam supplied with mounting accesso-

ries to all edges of the product.(Fig. 15)

Fig. 14

Fig. 15

ASSEMBLY OF PRODUCT

11.03.2019HOOD USER GUIDE ENGLISH22

Produkt Specifikationer

Mærke:	SVAN
Kategori:	Emhætte
Model:	SVCF6080
Type:	Indbygget under
Vekselstrømsindgangsspænding:	220-240 V
Vekselstrømsindgangsfrekvens:	50 Hz
Bredde:	400 mm
Dybde:	555 mm
Vægt:	12500 g
Produktfarve:	Hvid
Kontroltype:	Berøring
Antal hastigheder:	3
Motoreffekt:	275 W
Årligt energiforbrug:	58 kWh
Husmateriale:	Aluminium
Tilsluttet belastning:	285 W
Lampetype:	LED
Støjniveau:	67 dB
Energieffektivitetsskala:	A++ til E
Energieffektivitetsklasse:	B
Pæreeffekt:	7 W
Antal lyskilder:	1 pære(r )
Maksimal ekstraktionseffekt:	755 m³/t
Motor inkluderet:	Ja
Fedtfilter type:	Aluminium
Ekstraktionstype:	Ledet
Højde (maks.):	298 mm
Væske - dynamisk effektivitetsklasse:	A
Lys - effektivitetsklasse:	E
Fedt - filtrering effektivitetsklasse:	D