Taga Harmony TTA-500 Manual


Læs gratis den danske manual til Taga Harmony TTA-500 (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Taga Harmony TTA-500, eller vil du spørge andre brugere om produktet?

Side 1/16
TTA-500
CLASS AB VACUUM TUBE STEREO AMPLIFIER
Instruction Manual
IN PUT
SR C D NELI AUX
VOLUME
MI N MAX
POWER
OFF
HT
Edition 02-18
2
Introduction
Thank you for purchasing this TAGA Harmony amplier.
TTA-500 is 2 x 35W Class AB high delity vacuum tube integrated amplier utilizing
four EL34 tubes in the output stage and a 12AX7 tube preamp section, composed of
two 6SN7 tubes as drivers, and a Triode / Pentode mode selector switch.
TTA-500 uses audiophile-grade coupling capacitors: Wima for input and connecting
driver tubes with the output amp, and Rubycon capacitors in the power ltering.
The amplier sounds in a very warm, lifelike way and high dynamics.
The sound is very linear with almost no negative feedback.
High-quality EI broadband sound output transformer provides voltage stability and
constant and immediately-available energy at any volume level.
The both channels use independent rectier and lter circuits in the supply power.
The sound is natural and fresh with deep multidimensional soundstage.
The audiophile grade ALPS volume potentiometer ensures minimal noises and
channels crosstalk and has excellent operational feel and limits errors between the two
channels.
The high-end class, gold-plated speaker terminals o󰀨er almost lossless audio signal
transmission to speakers.
Analog inputs with high-end solid machined brass RCA sockets can accommodate up
to 3 stereo devices.
The preamplier input (HT input) is dedicated for using the TTA-500 as a tube power
amplier and allows to connect it to your Home Theatre system (AV receiver or amp)
to drive front left and right channels - now you can use the same pair of speakers in
your high-end stereo as well as in the multichannel system without switching speaker
cables nor changing the amplier.
The removable IEC power cable gives you an option to upgrade your system with a
premium audiophile power cable in any time.
The TTA-500 amplier does not only sound great but it also looks magnicently. The
front and side walls of the housing are made of thick 6 mm aluminum. The vacuum
tube decorative panel is nished in a modern brushed aluminum color.
Enjoy the analog sound at its best Enjoy the TTA-500!
Cleaning
Do not use strong or abrasive cleaners. Use a dry, soft cloth for cleaning.
Specications
Full technical specications are available on the www.TagaHarmony.com website.


Produkt Specifikationer

Mærke: Taga Harmony
Kategori: Ikke kategoriseret
Model: TTA-500

Har du brug for hjælp?

Hvis du har brug for hjælp til Taga Harmony TTA-500 stil et spørgsmål nedenfor, og andre brugere vil svare dig