Tripp Lite B021-000-17 Manual


Læs gratis den danske manual til Tripp Lite B021-000-17 (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Tripp Lite B021-000-17, eller vil du spørge andre brugere om produktet?

Side 1/16
Owner’s Manual
1U Rackmount Console
(for KVM Switch or Server)
Models:
B021-000-17 & B021-000-19
Series No:
AGCB6533
1111 West 35th Street, Chicago, IL 60609 USA www.tripplite.com/support
Copyright © 2018 Tripp Lite. All rights reserved. All trademarks are the property of their respective owners.
The policy of Tripp Lite is one of continuous improvement. Specifications are subject to change without notice.
Package Contents
Overview
Tripp Lite's 1U Rackmount Console features an integrated LCD monitor, full keyboard and touch pad in a 1U rackmountable housing. This console is
designed for use with a server or a KVM switch with PS/2 console connectors. A PS/2 to USB adapter is included to connect to a USB KVM or server.
Features
Rackmount console (LCD monitor, keyboard, touch pad) in an integrated 1U rackmountable housing
Sleep mode when the monitor cover is closed
Rackmountable in standard 19-inch rack (1U)
Includes rackmount brackets
Supports resolutions up to 1366 x 768 pixels
Includes a USB 2.0 Pass-Through port which can be used to provide easy access to a USB port on a connected device (KVM switch or
computer)
SAVE THESE INSTRUCTIONS
This manual contains important instructions that should be followed during the installation and operation of the rackmount console
described in this manual. Read all instructions thoroughly before attempting to install or operate the rackmount console. Failure to comply
will void the warranty and could damage the rackmount console or connected equipment.
WARNING:
Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the
life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence
of a flammable anesthetic mixture with air, oxygen or nitrous oxide.
Español 5 Français 9 Русский 13
1U Rackmount Console
KVM Cable Kit (VGA, PS/2)
PS/2 to USB Adapter
AC Power Cord
Owner’s Manual
Mounting Brackets
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
2
Introduction
Front View
1 Handle: Pull to slide the module out; push to slide the
module in.
2 LCD Monitor: After sliding the module out, flip up the cover to
access the LCD monitor, keyboard and touch pad.
3 Keyboard
4 Rackmounting Brackets: The brackets secure the chassis to
a standard 19-inch rack or rack enclosure.
5 2-Button Touchpad: Press the left button to left-click, press
the right button to right-click. Scroll up and down the screen by
running finger up or down the far right side of the touchpad.
6 Console and LCD Controls: The controls located here include
the console power On/Off button, and the buttons used to
control the position and picture setting of the LCD display.
7 Pass-Through USB Port: This port is inactive until a USB A
Male/Male cable (Tripp Lite model UR020-Series) is used to
connect the Pass-Through port on the back of the console to a
USB port on a computer or KVM switch. When active, a USB
device connected to the front of the console will then be
available for use with the connected computer or KVM switch.
Rear View
1 Console Port Section: Connects the console to your server or
KVM switch with the included KVM cable kit.
2 Power Socket: The AC power cord plugs in here.
3 Pass-Through USB Port: This port is connected to the Pass-
Through USB port on the front of the console. The front Pass-
Through port is active when a USB A Male/Male cable (Tripp Lite
model UR020-Series) is connected between the Pass-Through
port on the back and a USB port on a KVM or server.
Rackmounting
Tripp Lite's 1U Rackmount Console is designed for mounting in a 1U
rack system. The various mounting options are explained in the
sections that follow.
Standard 4-Post Rackmounting
The standard rackmounting brackets that come attached to the unit
allow it to be installed in standard 1U racks by a single individual.
1 Slide out the rear mounting brackets from the console and
mount both brackets (separate from the console) to the inside
rear of a standard 1U rack system using user-supplied screws.
2 Take the console and gently slide it into the two rear-mounted
brackets in the rack and secure the console in place by inserting
user-supplied screws.
2-Post Rackmounting
The console can also be mounted in a 2-post rack using the
optional 2-Post Rackmount Kit (Tripp Lite model B019-000). The
mounting hardware allows for the console to be opened with the
drawer in any position. The kit provides added stability and prevents
the console frame from twisting. See the B019-000 Owner's Manual
for detailed mounting instructions.
1
3
7
1
2
12 3
4
2
5
6


Produkt Specifikationer

Mærke: Tripp Lite
Kategori: Ikke kategoriseret
Model: B021-000-17

Har du brug for hjælp?

Hvis du har brug for hjælp til Tripp Lite B021-000-17 stil et spørgsmål nedenfor, og andre brugere vil svare dig