Tripp Lite B021-000-19-HD2 Manual

Tripp Lite Ikke kategoriseret B021-000-19-HD2

Læs gratis den danske manual til Tripp Lite B021-000-19-HD2 (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Tripp Lite B021-000-19-HD2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

Owner’s Manual

1U Rackmount Console

(for KVM Switch or Server)

Model:

B021-000-19-HD2

Series No:

AGCB6533

Package Contents

Features

• Rackmount console (LCD monitor, keyboard, touchpad) in an integrated 1U rackmountable housing

• Sleep mode when the monitor cover is closed

• Rackmountable in EIA-standard 19-inch rack (1U)

• Includes rackmount brackets

• Supports resolutions up to 1920 x 1080

• Includes a USB 2.0 pass-through port, which can be used to provide easy access to a USB port on a connected device

(KVM switch or computer)

• Includes a DVI-I port for connecting to a DVI or VGA* server or KVM switch

*VGA server connection using the included DVI-to-VGA adapter

SAVE THESE INSTRUCTIONS

This manual contains important instructions that should be followed during the installation and operation of the rackmount console

described in this manual. Read all instructions thoroughly before attempting to install or operate the rackmount console. Failure to comply

will void the warranty and could damage the rackmount console or connected equipment.

WARNING:

Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the

life support equipment or to significantly affect its safety or effectiveness is not recommended.

Español p. 5 Français p. 9 Русский p. 13

• 1U Rackmount Console

• KVM Cable Kit (DVI-I, USB)

• DVI (Female) to VGA (Male) Adapter

• AC Power Cord

• Owner’s Manual

• Mounting Brackets

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Introduction

Front View

1 Handle: Pull to slide the module out; push to slide the

module in.

2 LCD Monitor: After sliding the module out, flip up the cover to

access the LCD monitor, keyboard and touchpad.

3 Keyboard

4 Rackmounting Brackets: The brackets secure the chassis to

an EIA-standard 19-inch rack or rack enclosure.

5 2-Button Touchpad: Press the left button to left-click; press

the right button to right-click. Scroll up and down the screen by

running finger up or down the far right side of the touchpad.

6 Console and LCD Controls: The controls located here include

the console power On/Off button and the buttons used to control

the position and picture setting of the LCD display.

7 Pass-Through USB Port: This port is inactive until a USB A

male/male cable (Tripp Lite UR020-Series) is used to connect

the pass-through port on the back of the console to a USB port

on a computer or KVM switch. When active, a USB device

connected to the front of the console will be available for use

with the connected computer or KVM switch.

Rear View

1 Console Port Section: Connects the console to your server or

KVM switch with the included KVM cable kit.

2 Power Socket: The AC power cord plugs in here.

3 Pass-Through USB Port: This port is connected to the pass-

through USB port on the front of the console. The front pass-

through port is active when a USB A male/male cable (Tripp Lite

UR020-Series) is connected between the pass-through port on

the back and a USB port on a KVM switch or server.

Rackmounting

Tripp Lite's 1U Rackmount Console is designed for mounting in a 1U

rack system. The various mounting options are explained in the

sections that follow.

Standard 4-Post Rackmounting

The standard rackmounting brackets that come attached to the unit

allow it to be installed in EIA-standard 1U racks by a single

individual.

1 Slide out the rear mounting brackets from the console, and

mount both brackets (separate from the console) to the inside

rear of a 1U rack system using user-supplied screws.

2 Gently slide the console into the two rear-mounted brackets in

the rack. Secure the console in place by inserting user-supplied

screws.

2-Post Rackmounting

The console can also be mounted in a 2-post rack using the

optional 2-Post Rackmount Kit (Tripp Lite model B019-000). The

mounting hardware allows for the console to be opened with the

drawer in any position. The kit provides added stability and prevents

the console frame from twisting. See the B019-000 Owner's Manual

for detailed mounting instructions.

12 3

Produkt Specifikationer

Mærke:	Tripp Lite
Kategori:	Ikke kategoriseret
Model:	B021-000-19-HD2

Har du brug for hjælp?

Hvis du har brug for hjælp til Tripp Lite B021-000-19-HD2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Tripp Lite Manualer

Tripp Lite PDUMV30 Manual

12 August 2025

Tripp Lite Isobar ISOBLOK2-0 Manual

12 August 2025

Tripp Lite SRIN4181810 Manual

1 August 2025

Tripp Lite Protect It! TLP74RB Manual

1 August 2025

Tripp Lite SPS610HGRA Manual

1 August 2025

Tripp Lite N286-100G-SR4SA Manual

1 August 2025

Tripp Lite Protect It! TLP88USBB Manual

1 August 2025

Tripp Lite Protect It! TLP664USBB Manual

1 August 2025

Tripp Lite Protect It! TLP608DMUAM Manual

1 August 2025

Tripp Lite SRWB18410X2STR Manual

1 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

MSW -AIRS1290ASN Manual

17 August 2025

Mueller SC 98.47 pro Manual

17 August 2025

MSW -WPW-20 Manual

17 August 2025

Planet WGS-4215-8P2X Manual

17 August 2025

Mueller SC 98.40 knx Manual

17 August 2025

MSW -MS76A Manual

17 August 2025

MSW -HFCV-40-C Manual

17 August 2025

Mars Gaming MCPU-XU9 Manual

17 August 2025

Mars Gaming MPS5-B Manual

17 August 2025

B-Tech BT8566 Manual

17 August 2025