Tripp Lite BP240V135 Manual

Tripp Lite Ikke kategoriseret BP240V135

Læs gratis den danske manual til Tripp Lite BP240V135 (36 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Tripp Lite BP240V135, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/36

Owner’s Manual

Model: BP240V135

(Series Number: AG-01A2)

External Battery Pack

for Use with 3-Phase Online 400V SVT Series

(SVT10KX/20KX/30KX)

Español 8 • Français 15 • Русский 22 • Deutsch 29

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

1. Important Safety Warnings

SAVE THESE INSTRUCTIONS

All sections of this manual contain instructions and warnings that must be followed during the installation and operation

of the battery cabinet described in this manual. Read ALL instructions thoroughly before attempting to move, install or

connect your battery cabinet. Failure to heed these warnings may affect your warranty and cause serious property damage

and/or personal injury.

DANGER! LETHAL HIGH VOLTAGE HAZARD!

All wiring should be performed by a qualiﬁed electrician, in accordance with the warnings in this manual and all

applicable electrical and safety codes. Incorrect wiring may cause serious personal injury and property damage.

Installation and Location Warnings

• Install the battery cabinet in a controlled indoor environment, away from moisture, temperature extremes, ﬂammable liquids and

gasses, conductive contaminants, dust and direct sunlight.

• Install the battery cabinet in a level, structurally sound location.

• The battery cabinet is very heavy; use extreme caution when moving or lifting the unit.

• Operate the battery cabinet at indoor temperatures between 0° C and 40° C (32° F and 104° F) and 30-90% non-condensing humidity

only. For optimum battery performance, maintain an ambient indoor temperature of 25° C (77° F).

• Leave adequate space around the front and rear of the battery cabinet for proper ventilation. Do not block, cover or insert objects into

the external ventilation openings of the battery cabinet.

• Do not place any object on the battery cabinet, especially containers of liquid.

• Do not attempt to stack the battery cabinet. Attempting to stack the battery cabinet may cause permanent damage and create a

potential for serious personal injury.

• Do not attempt to unpack or move the battery cabinet without assistance. Use appropriate handling equipment rated to bear the

weight and bulk of the battery cabinet, such as freight elevators, pallet jacks and forklifts. (Fully extend forks under load. Spread forks

to maximum possible width under load. Lift cabinet from bottom only. Wear safety shoes.)

• For emergency use, install a ﬁre extinguisher rated for energized electrical equipment ﬁres (Class C rating or exact equivalent, with a

non-conductive extinguishing agent) near the battery cabinet.

Connection Warnings

• The battery cabinet contains hazardous high voltages that have the potential to cause personal injury or death from electric shock.

• The battery cabinet has its own energy source. The output terminals may be live even when the battery cabinet is not connected to a

UPS system.

• The battery cabinet must be suitably grounded according to all applicable electrical wiring regulations.

• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of

the life support equipment or to signiﬁcantly affect its safety or effectiveness is not recommended. Do not use this equipment in the

presence of a ﬂammable anesthetic mixture with air, oxygen or nitrous oxide.

• De-energize all input and output power sources before installing cables or making electrical connections.

• Use ﬂexible cable of sufﬁcient length to permit battery cabinet servicing.

• Use ferrule caps to cover termination cables and prevent frayed ends from shorting on terminal blocks. Use cabling rated VW-1, FT-1

or better. Use cable sleeves and connector clamps.

• Conﬁrm that all cables are marked correctly according to their purpose, polarity and diameter.

• Observe proper polarity by connecting negative to negative and positive to positive (and center string to center string, where

applicable). Failure to observe proper polarity may damage the batteries and create a serious risk of personal injury and property

damage.

• Wiring should be performed by trained, qualiﬁed electricians only. Refer to the UPS unit’s Owner’s Manual for wire sizing.

Produkt Specifikationer

Mærke:	Tripp Lite
Kategori:	Ikke kategoriseret
Model:	BP240V135
Bredde:	250.2 mm
Dybde:	825.5 mm
Højde:	580.1 mm
Vægt:	155130 g
Brugervejledning:	Ja
Produktfarve:	Sort
Batterispænding:	240 V
Pakkevægt:	170250 g
Pakkedybde:	1000 mm
Pakkebredde:	370 mm
Pakkehøjde:	660 mm
Formfaktor:	Tower
Husmateriale:	Stål
Styrehjul:	Ja
Bæredygtighedscertifikater:	RoHS
Hovedkassen højde (udvendigt):	660.4 mm
Hovedkassens længde (udvendigt):	1000 mm
Hovedkassens bruttovægt (udvendigt):	211370 g
Hovedkassens bredde (udvendigt):	370.1 mm
Oprindelsesland:	Kina
Antal hjul:	4 hjul
Produkter pr. hovedkasse (udvendigt):	1 stk