Tripp Lite CSHANDLEKIT2 Manual

Tripp Lite Ikke kategoriseret CSHANDLEKIT2

Læs gratis den danske manual til Tripp Lite CSHANDLEKIT2 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Tripp Lite CSHANDLEKIT2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Installation Guide

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

CSHANDLEKIT2

Caster and Handle Accessory for

Tablet/Chromebook™ Charging Stations

(Compatible with models: CSC16AC, CSCXB16AC, CSCXS16AC,

CSC16USB, CSCXSB16USB, CSCXIS16USB)

Español 3 • Français 5 • 7Póññêèé

x12

x16

WARNING!

Do not attempt to install casters with equipment inside the charging station cabinet. Remove all

electronic devices from the charging station cabinet before installing casters. Failure to heed this

warning may result in damage to the charging station and equipment or personal injury.

• Do not push the charging station from the side panels. Pushing from the side panels will cause a tipping hazard.

• When rolling the charging station on its casters, always push it from behind.

• A rolling charging station can cause personal injury and property damage if not properly supervised. If rolling the charging station down a

ramp is required, use extreme caution. Do not attempt to use ramps that have a slope grade greater than 12%.

M6 x

15 mm

Hex

Screw

4 mm

Hex

Key

M6 x 120 mm Hex Head Screw

Lock

Washer

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

Parts List

Installing Casters

The CSHANDLEKIT2 contains four swivel/locking casters and four

caster risers. To install, use a wrench (not included) to attach the

M6 x 120 mm hex head screws, M6 lock washers, and risers to the

charging station.

Installing Handle

To install the handle bracket, use the included 4 mm hex key to attach

the M6 x 15 mm hex screws to the charging station cabinet.

Installing Cord Manager

To install the cord manager, use the 4 mm hex key to secure the M6 x 15 mm hex screws (four per bracket) to the charging station cabinet.

Tripp Lite has a policy of continuous improvement. Speciﬁcations are subject to change without notice.

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

M6 x 120 mm

x16

M6 x 15 mm

M6 Lock Washer

x16

Riser

Produkt Specifikationer

Mærke:	Tripp Lite
Kategori:	Ikke kategoriseret
Model:	CSHANDLEKIT2
Type:	Bærbar enhedsadministrationsvogn
Vægt:	9594 g
Brugervejledning:	Ja
Produktfarve:	Sort
Pakkevægt:	8570 g
Pakkedybde:	533.4 mm
Pakkebredde:	472.4 mm
Pakkehøjde:	111.8 mm
Kabler inkluderet:	Vekselstrøm
Placering:	Gulv
Hovedkassen højde (udvendigt):	111.8 mm
Hovedkassens længde (udvendigt):	533.4 mm
Hovedkassens bruttovægt (udvendigt):	8570 g
Hovedkassens bredde (udvendigt):	472.4 mm
Oprindelsesland:	Kina
Produkter pr. hovedkasse (udvendigt):	1 stk
Kapabilitet:	CSC16AC, CSC16ACW, CSC16USB
Antal understøttede enheder:	16
Låsning:	Ja
Monteringsbeslag inkluderet:	Ja
Maksimal vægtkapacitet:	158.8 kg
Skruer inkluderet:	Ja
Maksimal skærmstørrelse kompatibilitet:	- "