Tripp Lite N252-P24 Manual

Tripp Lite Ikke kategoriseret N252-P24

Læs gratis den danske manual til Tripp Lite N252-P24 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Tripp Lite N252-P24, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Quick Start Guide

Installation

24-Port 1U Rack-Mount Power over Ethernet

(PoE)* 110 Patch Panels

Models: N052-P24 (Cat5e), N252-P24 (Cat6)

Español 3 • Français 5 • Русский 7

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

22-24 AWG

Avoid gaps

Wrap strap

around cables.

Figure 1: T568A/B Wiring Scheme

Strip the cable jacket approximately 1.25 in. (30 mm).

Use a 110 impact tool for termination.

Note: Set the tool to the “Low Impact” setting.

Seat each wire according to the wiring scheme shown in Figure 1.

Ensure the untwisted length is as short as possible. Avoid overlapping

one pair over the others.

Note: 110 punchdown orientation may vary by model.

In order to maintain stable performance, ensure the cable bundles

are secured with the attached straps.

To maximize performance with Power ovwer Ethernet (PoE) applications, these patch panels are specially designed to prevent spark-gap erosion

that degrades the plug and jack contacts over time and can impact data and/or power transmission capabilities.

17-11-012-933783.indb 1 11/28/2017 1:55:05 PM

Warranty & Product Registration

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Lifetime Limited Warranty

TRIPP LITE warrants this product to be free from original defects in materials and workmanship for its lifetime. TRIPP LITE’s obligation under this warranty is

limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material

Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE

service center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of

purchase. This warranty does not apply to equipment which has been damaged by accident, negligence or misapplication or has been altered or modiﬁed in any

way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s)

may not apply to the purchaser. EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR

CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Speciﬁcally, TRIPP LITE is

not liable for any costs, such as lost proﬁts or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by

third parties, or otherwise.

PRODUCT REGISTRATION

Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite

product!*