Tripp Lite PDUMV32HV Manual

Tripp Lite Ikke kategoriseret PDUMV32HV

Læs gratis den danske manual til Tripp Lite PDUMV32HV (28 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Tripp Lite PDUMV32HV, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/28

Owner’s Manual

Single Phase Metered 0U

Power Distribution Unit

(Bank Measurements)

200/240V MODELS

Important Safety Instructions 2

Installation 3

Features 5

Service 6

Warranty and Product Registration 7

Español 8

Français 15

Русский 22

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

PDUMV30HV2

(Series Number: AG-013F)

PDUMV32HV

(Series Number: AG-0140)

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an

ISOBAR6ULTRA surge protector—

a $100 value!

www.tripplite.com/warranty

21-03-406-93338D.indb 1

21-03-406-93338D.indb 121-03-406-93338D.indb 1 4/1/2021 1:41:26 PM

4/1/2021 1:41:26 PM

4/1/2021 1:41:26 PM4/1/2021 1:41:26 PM

Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be followed during

the installation, operation, and storage of this product. Failure to heed these

instructions and warnings may affect the product warranty.

CAUTION Only those who are properly trained or qualified to use this device should

do so. Anyone who is not trained or qualified should not use this device unless it is

under the supervision of someone who is properly trained or qualified to do so.

Children must be supervised to ensure that they do not use the device as a toy.

Never use the device if the cord and plug are damaged; if it is not working properly,

or if it has been dropped or damaged, take it to an authorized service center for

inspection and repair.

If the power cord is damaged, it must be replaced by the manufacturer, its authorized

service agent, or by qualified personnel in order to avoid a danger.

• The PDU provides the convenience of multiple outlets, but DOES NOT provide surge or line

noise protection for connected equipment.

• The PDU is designed for indoor use only, in a controlled environment, away from excess

moisture, temperature extremes, conductive contaminants, dust or direct sunlight.

• Keep indoor ambient temperature between 32°F and 122°F (0°C and 50°C).

• The PDU must be installed by a qualiﬁed technician only.

• Do not attempt to mount the PDU to an insecure or unstable surface.

• Install in accordance with National Electrical Code standards. Be sure to use the proper

overcurrent protection for the installation, in accordance with the plug/equipment rating.

• Connect the PDU to an outlet that is in accordance with your local building codes and that is

adequately protected against excess currents, short circuits and earth faults.

• The electrical outlets supplying power to the equipment should be installed near the equipment

and easily accessible.

• Do not connect the PDU to an ungrounded outlet or to extension cords or adapters that

eliminate the connection to ground.

• Be sure to provide a local disconnect device on any models that are permanently installed

without a plug that is easily accessible.

• Never attempt to install electrical equipment during a thunderstorm.

• Individual equipment connected to the PDU should not draw more current than the individual

PDU’s outlet’s rating.

• The total load connected to the PDU must not exceed the maximum load rating for the PDU.

• Do not attempt to modify the PDU, input plugs or power cables.

• Do not drill into or attempt to open any part of the PDU housing. There are no user-serviceable

parts inside.

• Do not attempt to use the PDU if any part of it becomes damaged.

• Use of this equipment in life support applications where failure of this equipment can

reasonably be expected to cause the failure of the life support equipment or to signiﬁcantly

affect its safety or effectiveness is not recommended. Do not use this equipment in the

presence of a ﬂammable anesthetic mixture with air, oxygen or nitrous oxide.

21-03-406-93338D.indb 2

21-03-406-93338D.indb 221-03-406-93338D.indb 2 4/1/2021 1:41:26 PM

4/1/2021 1:41:26 PM

4/1/2021 1:41:26 PM4/1/2021 1:41:26 PM

Produkt Specifikationer

Mærke:	Tripp Lite
Kategori:	Ikke kategoriseret
Model:	PDUMV32HV
Bredde:	55.1 mm
Dybde:	64 mm
Højde:	1778 mm
Vægt:	5900 g
Produktfarve:	Sort
Pakkevægt:	7980 g
Pakkedybde:	1927.1 mm
Pakkebredde:	245.1 mm
Pakkehøjde:	175 mm
Opbevaringstemperatur (T-T):	-15 - 60 °C
Relativ luftfugtighed ved drift (H-H):	5 - 95 %
Driftstemperatur (T-T):	0 - 50 °C
Husmateriale:	Metal
Dimensioner (BxDxH):	245 x 175 x 192.7 mm
Pakkens dimensioner (BxDxH):	68.8 x 64 x 177.8 mm
Driftshøjde:	0 - 3000 m
Oprindelsesland:	Taiwan
Produkter pr. hovedkasse (udvendigt):	1 stk
Montering:	Lodret
Hovedkasse (udvendig) GTIN (EAN/UPC):	10037332182811
Strømstik:	IEC309
Nominel udgangsspænding:	200-240 V
Nominel indgangsspænding:	230 V
AC udgange, antal:	48 AC stikkontakt(er)
AC stikkontakt typer:	C13 coupler, C19 coupler
Rackkapacitet:	0U
Strøm (maks.):	32 A
PDU-typer:	Målte