Tripp Lite Protect It! SK10USB Manual

Tripp Lite Ikke kategoriseret Protect It! SK10USB

Læs gratis den danske manual til Tripp Lite Protect It! SK10USB (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Tripp Lite Protect It! SK10USB, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

1111 W. 35th Street Chicago, IL 60609 USA • www.tripplite.com/support

® is a registered trademark of Tripp Lite.

Owner’s Manual

Protect It!® Wall-Mount

Surge Protectors with

Dedicated USB Charging Ports

Models: SK10USB, SK30USB, SK120USB

Installation 2

Lifetime Limited Warranty 3

Ultimate Lifetime Insurance Policy 4

Warranty Registration 3

Important Safety Instructions 2

14-03-209-933349.indd 1 4/18/2014 1:55:21 PM

Installation

Connect Your Surge Protector to the AC Power Line: Plug the surge protector directly into a

3-wire grounded, 120V AC outlet.

Secure Surge Protector to Outlet Using Included Mounting Screw (SK30USB only):

Securing the surge protector to the outlet will prevent accidental disconnection. Remove the

wall outlet cover plate and plug in surge protector. Screw in the included mounting screw to

attach the surge protector to the outlet.

Check Your Surge Protector’s Diagnostic Indicator Lights: If your surge protector features

diagnostic LEDs or indicators, check them prior to connecting your equipment. They will indicate

various operating conditions when the surge protector is plugged into a live 120V AC outlet and

the surge protector’s power switch is on.

“PROTECTED” LED: Indicates the surge suppression components are intact and providing

complete protection against surges. If this LED does not illuminate, some of the surge

suppression components are not functioning, and the unit should be replaced.

Visit www.tripplite.com/support.

Connect Your Equipment to the Surge Protector’s AC Outlets: Plug your equipment’s power

cords (including 2-wire devices) into the surge protector’s AC outlets. Select models feature

integrated safety covers which cover the outlets when not in use. Other models feature special

widely-spaced outlets to accommodate transformers without covering other outlets. DO NOT

plug in extension cords. DO NOT OVERLOAD the surge protector’s outlets. The surge protector

can accommodate a total equipment load of up to 15 amps (whether plugged into a single

outlet or spread out over multiple outlets).

USB Charging Ports: Two USB charging ports are capable of delivering up to 2.1 A total (2.4 A

total for the SK10USB). This will provide enough power to charge the most demanding devices,

including smartphones, tablets and MP3 players.

SAVE THESE INSTRUCTIONS

CAUTION! DO NOT connect to an ungrounded outlet. DO NOT use with 2-wire extension

cords or adapters. This surge protector is designed for indoor use only. Install the surge

protector away from heat-emitting appliances such as radiators or heat registers. Do not

install where excessive moisture is present. Do not plug extension cords into it. Never install

electrical, telephone, network or coaxial wiring during a lightning storm. Do not drill into any

part of the housing or open the housing for any reason. There are no user-serviceable parts

inside.

Important Safety Instructions

• Use of this equipment in life support applications where failure of this equipment can

reasonably be expected to cause the failure of the life support equipment or to significantly

affect its safety or effectiveness is not recommended. Do not use this equipment in the

presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.

14-03-209-933349.indd 2 4/18/2014 1:55:21 PM

Produkt Specifikationer

Mærke:	Tripp Lite
Kategori:	Ikke kategoriseret
Model:	Protect It! SK10USB
Bredde:	68.1 mm
Dybde:	32.5 mm
Højde:	79.5 mm
Produktfarve:	Sort
Fjernbetjening inkluderet:	Ingen
Certificering:	UL1449
LED-indikatorer:	Ja
Ledningsfri:	Ja
Antal USB-porte:	2
Bæredygtighedscertifikater:	RoHS
Antal produkter inkluderet:	1 stk
Strømstik:	NEMA 5–15P
Nominel indgangsspænding:	120 V
AC udgange, antal:	1 AC stikkontakt(er)
AC stikkontakt typer:	NEMA 5–15P
Overspænding energivurdering:	1080 J
EMI/RFI støjfiltrering:	Ja
Nominel udgangsstrøm:	15 A
Spændingsblokering:	500 V