Tripp Lite Protect It! SK34USBB Manual

Tripp Lite Ikke kategoriseret Protect It! SK34USBB

Læs gratis den danske manual til Tripp Lite Protect It! SK34USBB (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om Tripp Lite Protect It! SK34USBB, eller vil du spørge andre brugere om produktet?

Side 1/4
1111 W. 35th Street Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2016. All rights reserved. Protect It!
® is a registered trademark of Tripp Lite.
Owner’s Manual
Protect It!® Surge Protectors
with Dedicated USB Charging Ports
Models: SK10USB, SK120USB, SK30USB,
SK34USBB, SK40RUSBB, TRAVELER3USB
Important Safety Instructions 2
Installation 2
Lifetime Limited Warranty 3
Product Registration 3
Ultimate Lifetime Insurance Policy 4
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an
ISOBAR6ULTRA surge protector—
a $100 value!
www.tripplite.com/warranty
Este manual esta disponible en español en la página de Tripp Lite: www.tripplite.com
Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.com
16-02-347-93359B-EN.indd 1 3/2/2016 11:58:25 AM
2
Installation
Connect Your Surge Protector to the AC Power Line: Plug the surge protector directly into a
3-wire grounded, 120V AC outlet.
Secure Surge Protector to Outlet Using Included Mounting Screw (SK30USB, SK34USBB
and SK40RUSBB only): Securing the surge protector to the outlet will prevent accidental
disconnection. Remove the wall outlet cover plate and plug in surge protector. Screw in the
included mounting screw to attach the surge protector to the outlet.
Check Your Surge Protector’s Diagnostic Indicator Lights: If your surge protector features
diagnostic LEDs or indicators, check them prior to connecting your equipment. They will indicate
various operating conditions when the surge protector is plugged into a live 120V AC outlet.
“PROTECTED” LED: Indicates the surge suppression components are intact and providing
complete protection against surges. If this LED does not illuminate, some of the surge
suppression components are not functioning, and the unit should be replaced.
Visit www.tripplite.com/support.
Connect Your Equipment to the Surge Protector’s AC Outlets: Plug your equipments power
cords (including 2-wire devices) into the surge protector’s AC outlets. Other models feature
special widely-spaced outlets to accommodate transformers without covering other outlets. DO
NOT plug in extension cords. DO NOT OVERLOAD the surge protector’s outlets. The surge
protector can accommodate a total equipment load of up to 15 amps (whether plugged into a
single outlet or spread out over multiple outlets).
USB Charging Ports: USB charging ports are capable of delivering ample power to even the
most demanding devices, including smartphones, tablets and MP3 players. Total USB charging
output varies by model:
Model
USB Ports / Total
Charging Output
Number of
AC Outlets Cord Length
SK10USB 2 / 2.4 A 1 N/A
SK120USB 2 / 2.1 A 3 N/A
SK30USB 2 / 2.1 A 3 N/A
SK34USBB 4 / 4.8 A 3 N/A
SK40RUSBB 2 / 3.4 A 4 (Rotatable) N/A
TRAVELER3USB 2 / 2.1 A 3 18”
SAVE THESE INSTRUCTIONS
CAUTION! DO NOT connect to an ungrounded outlet. DO NOT use with 2-wire extension
cords or adapters. This surge protector is designed for indoor use only. Install the surge
protector away from heat-emitting appliances such as radiators or heat registers. Do not
install where excessive moisture is present. Do not plug extension cords into it. Never install
electrical, telephone, network or coaxial wiring during a lightning storm. Do not drill into any
part of the housing or open the housing for any reason. There are no user-serviceable parts
inside.
Important Safety Instructions
Use of this equipment in life support applications where failure of this equipment can
reasonably be expected to cause the failure of the life support equipment or to significantly
affect its safety or effectiveness is not recommended. Do not use this equipment in the
presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.
16-02-347-93359B-EN.indd 2 3/2/2016 11:58:25 AM


Produkt Specifikationer

Mærke: Tripp Lite
Kategori: Ikke kategoriseret
Model: Protect It! SK34USBB
Vekselstrømsindgangsfrekvens: 60 Hz
Bredde: 95 mm
Dybde: 33.5 mm
Højde: 126 mm
Vægt: 260 g
Produktfarve: Black, Transparent
Pakkevægt: 320 g
Pakkedybde: 142.2 mm
Pakkebredde: 104.1 mm
Pakkehøjde: 71.1 mm
Materiale: Plast
Ledningsfri: Ja
Antal USB-porte: 4
Bæredygtighedscertifikater: RoHS
Hovedkassen højde (udvendigt): 175.3 mm
Hovedkassens længde (udvendigt): 330.2 mm
Hovedkassens bruttovægt (udvendigt): 4310 g
Hovedkassens bredde (udvendigt): 302.3 mm
Oprindelsesland: Kina
Produkter pr. hovedkasse (udvendigt): 12 stk
Hovedkasse (udvendig) GTIN (EAN/UPC): 10037332195316
Maksimal strøm: 1800 W
Nominel indgangsspænding: 120 V
AC udgange, antal: 3 AC stikkontakt(er)
AC stikkontakt typer: NEMA 5–15R
Overspænding energivurdering: 540 J
Nominel udgangsstrøm: 4.8 A
Spændingsblokering: 600 V

Har du brug for hjælp?

Hvis du har brug for hjælp til Tripp Lite Protect It! SK34USBB stil et spørgsmål nedenfor, og andre brugere vil svare dig