Tripp Lite Protect It! TLP606DMUSB Manual

Tripp Lite Ikke kategoriseret Protect It! TLP606DMUSB

Læs gratis den danske manual til Tripp Lite Protect It! TLP606DMUSB (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Tripp Lite Protect It! TLP606DMUSB, eller vil du spørge andre brugere om produktet?

Side 1/4
1
Protect It!® Surge
Suppressors with
Dedicated USB Charging Ports
Models: TLP606USB, TLP606DMUSB
1111 W. 35th Street Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2013. All rights reserved. Protect It!
® is a registered trademark of Tripp Lite.
Owner’s Manual
WARRANTY
REGISTRATION:
register online today for a chance
to win a FREE Tripp Lite product
www.tripplite.com/warranty
Installation 2
Lifetime Limited Warranty 3
Ultimate Lifetime Insurance Policy 4
Warranty Registration 3
Important Safety Instructions 2
13-05-274 93-32C0-EN.indd 1 6/14/2013 9:50:49 AM
2
SAVE THESE INSTRUCTIONS
CAUTION! DO NOT connect to an ungrounded outlet. DO NOT use with 2-wire extension cords or
adapters. This surge suppressor is designed for indoor use only. Install the surge suppressor away
from heat-emitting appliances such as radiators or heat registers. Do not install where excessive
moisture is present. Do not plug extension cords into it. Never install electrical, telephone, network
or coaxial wiring during a lightning storm. Do not drill into any part of the housing or open the
housing for any reason. There are no user-serviceable parts inside.
Important Safety Instructions
Use of this equipment in life support applications where failure of this equipment can reasonably
be expected to cause the failure of the life support equipment or to significantly affect its safety
or effectiveness is not recommended. Do not use this equipment in the presence of a
flammable anesthetic mixture with air, oxygen or nitrous oxide.
Installation
Mount Your Surge Suppressor
(Optional Installation, TLP606USB Only): If desired, mount your surge suppressor on a wall
or other sturdy, vertical surface. However, you must mount the surge suppressor prior to
connecting your equipment. Place a sheet of paper over the surge suppressor’s mounting holes
and mark their centers with a push pin. Next, place this template over the desired area and mark
with the push pins. Install screws (user supplied) into the marks until ¼ in. (0.6 cm) of the screw
heads are exposed. Mount the surge suppressor over the screw heads and slide into place.
(Installation, TLP606DMUSB
Only): This suppressor features a
built-in clamping system for
attaching the unit to desks,
tables and work benches. To
install, loosen the two mounting
clamps, then slide the suppressor
firmly onto the edge of an
appropriate surface. Retighten
the mounting clamps.
Connect Your Surge Suppressor to
the AC Power Line: Plug the surge
suppressors power cord into a
standard, 3-wire grounded 120V AC
outlet.
Turn Your Surge Suppressor ON:
Press the surge suppressor’s power
switch to “ON” or “RESET” (depending
on model). Select models feature an
illuminated switch.
Installation, TLP606DMUSB Only
13-05-274 93-32C0-EN.indd 2 6/14/2013 9:50:49 AM


Produkt Specifikationer

Mærke: Tripp Lite
Kategori: Ikke kategoriseret
Model: Protect It! TLP606DMUSB

Har du brug for hjælp?

Hvis du har brug for hjælp til Tripp Lite Protect It! TLP606DMUSB stil et spørgsmål nedenfor, og andre brugere vil svare dig