Tripp Lite PS-607-HG-OEM Manual

Tripp Lite Ikke kategoriseret PS-607-HG-OEM

Læs gratis den danske manual til Tripp Lite PS-607-HG-OEM (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Tripp Lite PS-607-HG-OEM, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an

ISOBAR6ULTRA surge protector—

a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Owner’s Manual

PS Series

Power Strips

Español 4 • Français 6

17-06-031-933707.indb 1 6/6/2017 8:52:51 AM

Installation

1 Connect Your Power Strip to Your AC Power Line

Plug the power cord into a utility outlet. The power strip’s power cord should only be connected

to a standard 3-wire grounded 120V AC 60 Hz outlet.

2 Connect AC Equipment to Your Power Strip

Plug the AC power cords of your equipment into your power strip. Do not use extension cords

or adapters that eliminate the connection to ground. DO NOT OVERLOAD your power strip. Each

outlet can handle a load of up to the model’s amp rating, but do not exceed a total load of

more than the model’s amp rating for all outlets. If the circuit breaker trips, outlets will cease to

provide power. Reduce the load on the power strip down to your unit’s amp rating by unplugging

excess equipment, then depress the circuit breaker button to reset and restore power.

IMPORTANT SAFETY INSTRUCTIONS.

SAVE THESE INSTRUCTIONS.

WARNING

Use of this equipment in life support applications where failure of this

equipment can reasonably be expected to cause the failure of the life

support equipment or to signiﬁcantly affect its safety or effectiveness

is not recommended. Do not use this equipment within oxygen-enriched

atmospheres, or within 0.3 m of a point at which an oxygen-enriched

atmosphere is intentionally vented.

CAUTION

DO NOT connect to an ungrounded outlet. DO NOT use with extension cords or

adapters that eliminate the connection to ground. The power strip is designed

for indoor use only. Install the power strip away from heat emitting appliances

such as radiators or heat registers. Do not install where excessive moisture

or other conductive contaminants are present. Never install electrical wiring

during a lightning storm.

17-06-031-933707.indb 2 6/6/2017 8:52:52 AM

Produkt Specifikationer

Mærke:	Tripp Lite
Kategori:	Ikke kategoriseret
Model:	PS-607-HG-OEM

Har du brug for hjælp?

Hvis du har brug for hjælp til Tripp Lite PS-607-HG-OEM stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Tripp Lite Manualer

Tripp Lite BHDBT3-USB Manual

28 September 2025

Tripp Lite PDUMV30HV Manual

28 September 2025

Tripp Lite PDUMV30 Manual

12 August 2025

Tripp Lite Isobar ISOBLOK2-0 Manual

12 August 2025

Tripp Lite SRIN4181810 Manual

1 August 2025

Tripp Lite Protect It! TLP74RB Manual

1 August 2025

Tripp Lite SPS610HGRA Manual

1 August 2025

Tripp Lite N286-100G-SR4SA Manual

1 August 2025

Tripp Lite Protect It! TLP88USBB Manual

1 August 2025

Tripp Lite Protect It! TLP664USBB Manual

1 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Pioneer SXT-C10PS Manual

2 Oktober 2025

Draper 51132 Manual

2 Oktober 2025

Structural Concepts Reveal NE4820HSV Manual

2 Oktober 2025

Draper 82755 Manual

2 Oktober 2025

Structural Concepts Harmony HMO6353R Manual

2 Oktober 2025

Advantech UTC-320F Manual

2 Oktober 2025

Teesa TSA2010 Manual

2 Oktober 2025

Draper Expert 16098 Manual

2 Oktober 2025

Structural Concepts Grocerant FB4SS-3R Manual

2 Oktober 2025

Draper 51690 Manual

2 Oktober 2025