Tripp Lite SmartRack SR1UPNLTEMP Manual

Tripp Lite Ikke kategoriseret SmartRack SR1UPNLTEMP

Læs gratis den danske manual til Tripp Lite SmartRack SR1UPNLTEMP (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Tripp Lite SmartRack SR1UPNLTEMP, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

Owner’s Manual

SmartRack®

Panel-Mounted Ambient

Air Temperature Monitor

Model: SR1UPNLTEMP

Español 5 • Français 9

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

WARRANTY REGISTRATION

automatically entered to win an ISOBAR

surge protector in our monthly drawing!

tripplite.com/warranty

Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that must be followed during the installation and operation

of the product described in this manual. Read all instructions and warnings thoroughly before attempting

installation. Failure to comply may affect the warranty and cause property damage and personal injury.

Connection, Installation and Location Warnings

• Inspect the shipping container and the unit for shipping damage. Do not use the unit if it is damaged.

• This product is designed to be installed in commercial locations, such as IT data racks where only adults are normally present.

• Install in a controlled indoor environment, away from moisture, temperature extremes, ﬂammable liquids and gasses, conductive

contaminants, dust and direct sunlight.

• For best performance, keep the indoor temperature between 32º F and 104º F (0º C and 40º C).

• Do not attempt to modify or drill holes into the enclosure for mounting. Use the mounting holes provided.

• Install in accordance with National Electrical Codes (220-240V models).

• Install in accordance with National Electrical Code standards ANSI/NFPA 70 and Canadian Electrical Code, Part I, C22.1 (120V models).

• To reduce the risk of ﬁre, connect only to a circuit provided with branch circuit overcurrent protection in accordance with the National

Electrical Code, ANSI/NFPA 70 and the Canadian Electrical Code, Part I, C22.1 (120V models).

• Be sure to use maximum 16A overcurrent protection, in accordance with the plug/equipment rating, for the installation (220-240V

models).

• Be sure to use maximum 20A overcurrent protection, in accordance with the plug/equipment rating, for the installation (120V models).

• The equipment must be connected to an earthed ground mains outlet.

• Securely fasten the fans in place with screws.

• When using tools, use eye protection and follow all other safety precautions recommended by the tool manufacturer and required by

applicable regulations.

• This product does not require routine maintenance. Do not open the unit for any reason.

• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause failure of the life

support equipment or to signiﬁcantly affect its safety or effectiveness is not recommended.

Explanation of Symbols

Caution, Risk of Danger

Caution, Moving Fan Blades

Produkt Specifikationer

Mærke:	Tripp Lite
Kategori:	Ikke kategoriseret
Model:	SmartRack SR1UPNLTEMP
Type:	Indbygget
Bredde:	439.4 mm
Dybde:	95.2 mm
Højde:	43.4 mm
Vægt:	1250 g
Indbygget skærm:	Ja
Pakkevægt:	1800 g
Pakkedybde:	106.9 mm
Pakkebredde:	516.9 mm
Pakkehøjde:	190 mm
Materiale:	Stål
Kabellængde:	1.83 m
Bæredygtighedscertifikater:	RoHS
Formål:	Indendørs
Hovedkassen højde (udvendigt):	214.9 mm
Hovedkassens længde (udvendigt):	562.1 mm
Hovedkassens bruttovægt (udvendigt):	10270 g
Hovedkassens bredde (udvendigt):	537 mm
Sensortype:	Temperatursensor
Oprindelsesland:	Kina
Produkter pr. hovedkasse (udvendigt):	5 stk
Hovedkasse (udvendig) GTIN (EAN/UPC):	10037332240610
Temperatur, måleenheder:	F,°C
Nøjagtighed:	1 °C
Temperatur måleinterval:	-50 - 150 °C