Tripp Lite SmartRack SRW18UHD Manual

Tripp Lite Ikke kategoriseret SmartRack SRW18UHD

Læs gratis den danske manual til Tripp Lite SmartRack SRW18UHD (24 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 66 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 33.5 anmeldelser. Har du et spørgsmål om Tripp Lite SmartRack SRW18UHD, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/24

Table of Contents

1. Important Safety Instructions 2

2. Overview 2

3. Feature Identification 3

4. Enclosure Installation 4

4.1 Preparation 4

4.2 Leveling the Enclosure 4

4.3 Ground Connection 4

5. Enclosure Configuration 5

5.1 Door Locks 5

5.2 Cable Access and Management 5

5.3 Mounting Rails 5

5.4 Adjusting Mounting Rail Depth 5

6. Wall Mounting the Enclosure 6

7. Equipment Installation 7

7.1 Installing or Removing Cage Nuts 7

8. Specifications 7

9. Storage and Service 8

10. Warranty & Warranty Registration 8

Español 9

Français 17

Owner’s Manual

Wall-Mounted

SmartRack® Enclosure

Models: SRW12UHD & SRW18UHD

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

1. Important Safety Instructions

2. Overview

SAVE THESE INSTRUCTIONS

This Manual contains instructions and warnings that must be followed during the installation and operation of the product described in this manual. Failure to

comply may invalidate the warranty and cause property damage or personal injury.

• Keep the enclosure in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and gasses, conductive

contaminants, dust and direct sunlight.

• Leave adequate space at the front and rear of the enclosure for proper ventilation. Do not block, cover or insert objects into the external ventilation

openings of the enclosure.

• The enclosure is extremely heavy. Use caution when handling the enclosure. Do not attempt to unpack, move or install it unassisted. Use a

mechanical device such as a forklift or pallet jack to move the enclosure in the shipping container.

• Do not place any object on the enclosure, especially containers of liquid, and do not attempt to stack the enclosures.

• Inspect the shipping container and the enclosure for shipping damage. Do not use the enclosure if it is damaged.

• Leave the enclosure in the shipping container until it has been moved as close to the final installation location as possible.

• Install the enclosure in a structurally sound area capable of handling the load, or on a level floor that is able to bear the weight of the enclosure, all

equipment that will be installed in the enclosure and any other enclosures and/or equipment that will be installed nearby.

• Use caution when cutting packing materials. The enclosure could be scratched, causing damage not covered by the warranty.

• Save all packing materials for later use. Repacking and shipping the enclosure without the original packing materials may cause product damage

that will void the warranty.

• Do not reship the enclosure with additional equipment unless the enclosure was shipped with a special shock pallet (“SP1” models only). The

combined weight of the enclosure and installed equipment must not exceed the load capacity of the pallet. Tripp Lite is not responsible for any

damage that occurs during reshipment.

• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support

equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a flammable

anesthetic mixture with air, oxygen or nitrous oxide.

SmartRack Enclosures accommodate all standard 19-inch rackmount equipment, regardless of vendor, and ship fully assembled for quick and easy

deployment.

Produkt Specifikationer

Mærke:	Tripp Lite
Kategori:	Ikke kategoriseret
Model:	SmartRack SRW18UHD
Type:	Vægmonteret stativ
Bredde:	920 mm
Dybde:	629.2 mm
Højde:	938.8 mm
Vægt:	54390 g
Produktfarve:	Sort
Pakkevægt:	68950 g
Pakkedybde:	944.9 mm
Pakkebredde:	652.8 mm
Pakkehøjde:	1077 mm
Certificering:	EIA-310-E, NOM, RoHS
Harmoniseret systemkode (HS):	8517.79.0000
Hovedkassen højde (udvendigt):	1077 mm
Hovedkassens længde (udvendigt):	944.9 mm
Hovedkassens bruttovægt (udvendigt):	68950 g
Hovedkassens bredde (udvendigt):	652.8 mm
Oprindelsesland:	Kina
Produkter pr. hovedkasse (udvendigt):	1 stk
Dybde (efter britisk standard):	24.77 "
Højde (efter britisk standard):	36.96 "
Bredde (efter britisk standard):	36.22 "
Maksimal vægtkapacitet:	181.4 kg
Rackkapacitet:	18U