Tripp Lite SmartRack SRWF12U38 Manual

Tripp Lite Ikke kategoriseret SmartRack SRWF12U38

Læs gratis den danske manual til Tripp Lite SmartRack SRWF12U38 (32 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 6 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 3.5 anmeldelser. Har du et spørgsmål om Tripp Lite SmartRack SRWF12U38, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/32

Owner’s Manual

Low-Proﬁle Wall-Mount

SmartRack® Enclosures

Models: SRWF12U38, SRWF16U38

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Table of Contents

1. Important Safety Instructions 2

2. Overview 2

3. Feature Identiﬁcation 2

4. Preparation 3

4.1. Unpacking 3

4.2. Disassembly 3

5. Installation 4

5.1. Mounting the Backplate 4

5.2. Unit and Equipment Installation 5

6. Enclosure Conﬁguration 7

6.1. Cable Access and Management 7

6.2. Ground Connection 7

7. Speciﬁcations 7

8. Storage and Service 7

9. Warranty and Product Registration 8

Español 9

Français 17

Русский

16-04-227-9335C5.indb 1 9/2/2016 10:18:55 AM

1. Important Safety Instructions

3 Feature Identiﬁcation

2. Overview

SAVE THESE INSTRUCTIONS

This Manual contains instructions and warnings that must be followed during the installation and operation of the product

described in this manual. Failure to comply may invalidate the warranty and cause property damage or personal injury.

• Keep the enclosure in a controlled indoor environment, away from moisture, temperature extremes, ﬂammable liquids and gasses,

conductive contaminants, dust and direct sunlight.

• Leave adequate space at the front and rear of the enclosure for proper ventilation. Do not block, cover or insert objects into the external

ventilation openings of the enclosure.

• The enclosure is extremely heavy. Use caution when handling the enclosure. Do not attempt to unpack, move or install it unassisted. Use a

mechanical device such as a forklift or pallet jack to move the enclosure in the shipping container.

• Do not place any object on the enclosure, especially containers of liquid, and do not attempt to stack the enclosures.

• Inspect the shipping container and the enclosure for shipping damage. Do not use the enclosure if it is damaged.

• Leave the enclosure in the shipping container until it has been moved as close to the ﬁnal installation location as possible.

• Install the enclosure in a structurally sound area capable of handling the load, or on a level ﬂoor that is able to bear the weight of the

enclosure, all equipment that will be installed in the enclosure and any other enclosures and/or equipment that will be installed nearby.

• Use caution when cutting packing materials. The enclosure could be scratched, causing damage not covered by the warranty.

• Save all packing materials for later use. Repacking and shipping the enclosure without the original packing materials may cause product

damage that will void the warranty.

• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life

support equipment or to signiﬁcantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a

ﬂammable anesthetic mixture with air, oxygen or nitrous oxide.

A Front Panel

B Top Cover with Lock

C Side Panels

D Vent Tray

E 2U Backplate

F Cable Access Plates

G Ground Wire

Model SRWF12U38 shown. Product dimensions will vary by model.

Low-Proﬁle Wall-Mount SmartRack Enclosures provide convenient and secure vertical mounting for standard 19-inch rackmount equipment,

regardless of vendor, and ship fully assembled for quick and easy deployment in areas previously considered impossible for placement. Using

a modular design that easily assembles and disassembles, the enclosures support 8U (SRWF12U38) or 12U (SRWF16U38) of vertically

mounted equipment up to 38 inches deep and 4U of patch panels. Both units support up to 400 lb. maximum weight.

16-04-227-9335C5.indb 2 9/2/2016 10:18:55 AM

Produkt Specifikationer

Mærke:	Tripp Lite
Kategori:	Ikke kategoriseret
Model:	SmartRack SRWF12U38
Type:	Fritstående reol
Bredde:	500 mm
Dybde:	410.4 mm
Højde:	965.2 mm
Vægt:	30300 g
Brugervejledning:	Ja
Produktfarve:	Sort
Pakkevægt:	37650 g
Pakkedybde:	1089.9 mm
Pakkebredde:	570 mm
Pakkehøjde:	479.8 mm
Harmoniseret systemkode (HS):	8517.79.0000
Hovedkassen højde (udvendigt):	479.8 mm
Hovedkassens længde (udvendigt):	1089.9 mm
Hovedkassens bruttovægt (udvendigt):	37650 g
Hovedkassens bredde (udvendigt):	570 mm
Oprindelsesland:	Kina
Produkter pr. hovedkasse (udvendigt):	1 stk
Maksimal vægtkapacitet:	181437 kg
Rackkapacitet:	12U
Montering - dybde (maks):	889 mm
Nøglelås:	Ja