Tripp Lite SmartRack SRWO12US2 Manual

Tripp Lite Ikke kategoriseret SmartRack SRWO12US2

Læs gratis den danske manual til Tripp Lite SmartRack SRWO12US2 (20 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Tripp Lite SmartRack SRWO12US2, eller vil du spørge andre brugere om produktet?

Side 1/20
Owner’s Manual
Hinged Open Frame
Wall-Mount Server Rack
Models: SRWO12US2, SRWO16US
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2021 Tripp Lite. All rights reserved.
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR®
surge protector in our monthly drawing!
tripplite.com/warranty
Español 7 • Français 13
2
Tripp Lite’s SRWO12US2 and SRWO16US are perfect open frame rack solutions for applications where space is limited.
Heavy-duty construction and a wall-mount form factor keep equipment out of the way. The swinging door enables easy access
to rack-mounted equipment. The SRWO12US2 and SRWO16US accommodate all standard 19-inch rack-mount equipment,
up to 22 inches deep.
Wall-Mount Brackets (x2) Front Rail Assembly (x2) Swinging Door Assembly Hex Bolts (x16)
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that must be followed during the installation and operation
of the product described in this manual. Failure to comply may invalidate the warranty and cause property
damage or personal injury.
• Keep the rack in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and
gasses, conductive contaminants and dust.
• Leave adequate space at the front of the rack for proper ventilation.
• Inspect the shipping container and the rack for shipping damage. Do not use the rack if it is damaged.
• Leave the rack in the shipping container until it has been moved as close to the final installation location as possible.
• Install the rack in a structurally sound area capable of handling the load, the weight of the rack, all equipment that will be
installed in the rack and any other equipment that will be installed nearby.
• Save all packing materials for later use. Repacking and shipping the enclosure without the original packing materials may
cause product damage that may affect the warranty.
• Do not attempt to install the rack unassisted.
• Be sure to use four screws to secure the rack to a 16” on center stud wall using 5/16” minimum diameter lag bolts.
• Never secure the rack to plaster board alone. Always use the studs for these types of walls.
• Be sure to always have one side of the door latched when opening. Failure to do this will cause your equipment to fall out.
• Installation is to be performed by a SKILLED PERSON knowledgeable in mounting cabinets to surfaces intended to be used
in the end use application. It is the installer’s responsibility to choose appropriate hardware to mount the cabinet to a
desired surface and be sufficient to support the rated maximum load of 150 lbs.
• Install frame on wall using a level before placing the door on the frame rack.
• Do not attempt to install equipment without first wall-mounting and stabilizing the rack.
• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the
failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended.
Introduction
Parts List
Important Safety Instructions


Produkt Specifikationer

Mærke: Tripp Lite
Kategori: Ikke kategoriseret
Model: SmartRack SRWO12US2

Har du brug for hjælp?

Hvis du har brug for hjælp til Tripp Lite SmartRack SRWO12US2 stil et spørgsmål nedenfor, og andre brugere vil svare dig