Tripp Lite SREXTENDER Manual

Tripp Lite Ikke kategoriseret SREXTENDER

Læs gratis den danske manual til Tripp Lite SREXTENDER (20 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Tripp Lite SREXTENDER, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

Owner’s Manual

SREXTENDER

Rack Enclosure Extension Frame

Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that must be followed during the installation and operation of the product described in this

manual. Failure to comply may invalidate the warranty.

• Theinstructionsinthismanualareforcommonrackenclosuretypesandmaynotbeappropriateforallmountingapplications.Youmust

determine the ﬁtness of hardware and procedures before mounting. If hardware or procedures are not suitable for your application, contact the

manufacturer of your equipment for a solution.

• Rackmountequipmentmaybeextremelyheavy—becarefulwhenmovingorliftingequipment.Useoneormoreassistantsifnecessary.

Preparation

Note: Tripp Lite recommends using an assistant during installation. Descriptions of left and right are relative to the rear of your rack

enclosure. Illustrations may differ slightly from your enclosure, but procedures are similar for 48U, 42U and 25U enclosures unless

otherwise noted.

• Phillips-headScrewdriver(user-supplied;cordlessscrewdriverrecommended)

Tools Required

1111W.35thStreet,Chicago,IL60609USA

(773)869-1234•www.tripplite.com

Warranty

Registration:

chance to win a FREE Tripp Lite

product—www.tripplite.com/warranty

Español 8

Français 15

A B C D E H N

48/42U

1-1

Preparation (continued)

Note: The hinge swivels H and 12 hinge swivel screws L are pre-installed in the vertical sections A through D.

Parts List (If any parts are missing, contact Tripp Lite.)

ALowerLeftVerticalSection(1)

BLowerRightVerticalSection(1)

CUpperLeftVerticalSection(1)

DUpperRightVerticalSection(1)

ETopSection(1)

FBottomSection(1)

G1UBlankingPanels(3)

HHingeSwivels(6-allpre-installed)

IHinges(4)

JCableManagerBrackets(2)

KM6x12mmFlat-HeadScrews(8)

LM6x12mmPan-HeadScrews

andWashers(14total-12pre-installed)

MM5x10mmPan-HeadScrews

andWashers(40)

NGroundingCable(1)

OM5x20mmPan-HeadScrewsand

Washers(4)

PM4x8mmPan-HeadScrews

andWashers(8)

1 – Frame Assembly

Note: For 25U enclosures, you will use only the lower vertical sections A and B. You will not use the upper vertical sections C and D.

For 48U and 42U enclosures, you will use all four vertical sections.

(For25Uenclosures,skipthisstep.)Slidethelowerleftvertical

section A inside the upper left vertical section C as shown.

Repeatforthelowerrightverticalsection B and the upper right

vertical section D. The vertical sections are not interchangeable,

so refer to the diagram to conﬁrm that you’re assembling the

correct sections.

1-1

Produkt Specifikationer

Mærke:	Tripp Lite
Kategori:	Ikke kategoriseret
Model:	SREXTENDER
Bredde:	601.7 mm
Dybde:	199.4 mm
Højde:	2216.2 mm
Vægt:	22680 g
Antal pr. pakke:	1 stk
Produktfarve:	Sort
Pakkevægt:	22680 g
Pakkedybde:	1193.8 mm
Pakkebredde:	221 mm
Pakkehøjde:	215.9 mm
Harmoniseret systemkode (HS):	7326.90.8688
Hovedkassen højde (udvendigt):	215.9 mm
Hovedkassens længde (udvendigt):	1193.8 mm
Hovedkassens bruttovægt (udvendigt):	22680 g
Hovedkassens bredde (udvendigt):	221 mm
Oprindelsesland:	Kina
Produkter pr. hovedkasse (udvendigt):	1 stk
Rackkapacitet:	48U