Tripp Lite SRSEHOOD Manual


Læs gratis den danske manual til Tripp Lite SRSEHOOD (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Tripp Lite SRSEHOOD, eller vil du spørge andre brugere om produktet?

Side 1/8
WARNING: Do not attempt to use the roof panel for weight-bearing purposes other than those
explicitly described and approved by Tripp Lite. Do not attempt to add or remove the roof panel without
assistance.
Installation Instructions
SmartRack® Service Entry Hood
Model: SRSEHOOD
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2021 Tripp Lite. All rights reserved.
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR®
surge protector in our monthly drawing!
tripplite.com/warranty
1. Remove the Roof Panel
Models with a Toolless Roof
1 Pull the 2 pins near the rear of
the roof panel A. While holding
the pins, push the roof panel
upward B.
2 Remove the roof panel tabs A
from the roof panel attachment
slots B in the enclosure frame.
3 Lift the roof panel from the
enclosure.
1 2 3
B
A
A
B
Español 3 • Français 5 • Русский 7
2
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
21-04-128 93-3ECE_RevA
Tripp Lite has a policy of continuous improvement. Product specifications are subject to change without notice.
Photos and illustrations may differ slightly from actual products.
2. Installing the Drip-Resistant Cable Access
Housing
1 Remove one of the rubber sealing plugs from the top rear of the
enclosure by pushing it out from inside of the unit.
2 Using the included M4 x 8 mm pan head machine screws and toothed
washers (4 of each), fasten the screws into each of the threaded
holes.
1 2
1 2
1. Remove the Roof Panel (continued)
Models with Screws Securing the Roof
1 Remove the four 4 screws (2 on front, 2 on back) that
attach the roof panel to the unit.
2 Lift the roof panel from the enclosure.


Produkt Specifikationer

Mærke: Tripp Lite
Kategori: Ikke kategoriseret
Model: SRSEHOOD
Bredde: 240.8 mm
Dybde: 124 mm
Højde: 169.4 mm
Vægt: 1130 g
Antal pr. pakke: 1 stk
Produktfarve: Sort
Pakkevægt: 1360 g
Pakkedybde: 260.1 mm
Pakkebredde: 140 mm
Pakkehøjde: 180.1 mm
Harmoniseret systemkode (HS): 7326.90.8688
Hovedkassen højde (udvendigt): 620 mm
Hovedkassens længde (udvendigt): 800.1 mm
Hovedkassens bruttovægt (udvendigt): 36740 g
Hovedkassens bredde (udvendigt): 480.1 mm
Oprindelsesland: Kina
Produkter pr. hovedkasse (udvendigt): 27 stk
Hovedkasse (udvendig) GTIN (EAN/UPC): 10037332266948
Dybde (maks.): 169.4 mm

Har du brug for hjælp?

Hvis du har brug for hjælp til Tripp Lite SRSEHOOD stil et spørgsmål nedenfor, og andre brugere vil svare dig