Tripp Lite T016-004-K Manual

Tripp Lite Ikke kategoriseret T016-004-K

Læs gratis den danske manual til Tripp Lite T016-004-K (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Tripp Lite T016-004-K, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Owner’s Manual

4-Piece Network Installer

Tool Kit with Carrying Case

Model: T016-004-K

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an ISOBAR6ULTRA

surge protector—a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Package Contents

• Cable Tester

• Crimping Tool

• LSA Punchdown Tool

• Stripper Tool

• Carrying Case

• Owner’s Manual

16-07-119-9335F3-EN.indd 1 8/5/2016 9:48:43 AM

Operation

Product Features

Note: Before testing, insert a 9V battery (not included) and make sure the cable being

tested is not yet connected to the tester.

Testing is as simple as connecting the desired cable and moving the OFF/

ON/S switch to “ON” for fast LED ﬂashing or “S” for slow. When testing

an uninstalled patch cable, you can leave the Main and Remote testers

connected to each other.

When testing an installed cable, remove the Remote Tester from the Main

Tester. Connect one end of the cable to the appropriate connector on the

Main Tester, and the other end of the cable to the appropriate connector on

the Remote Tester.

Upon switching to the desired testing mode, the LEDs on the Main and

Remote Tester will illuminate to indicate the results.

Connected:

When a connection from one end of the cable to the other is found, the

LEDs on the unit will illuminate. Listed below are the pins that are supposed

to be illuminated for each connector type.

• – Pins 1 through 8 should be connectedRJ45 (UTP)

• ) – Pins 1 through 8 and the G pin should be connectedRJ45 (STP

• – RJ11 cables can be 2-wire, 4-wire, or 6-wire. 2-wire RJ11 cables RJ11

use pins 3 and 4, 4-wire pins 2-5, and 6-wire pins 1-6

• – Pins 1 through 6 should be connectedRJ12

• Kit includes cable tester, crimping tool, LSA punchdown tool, and stripper

tool along with a carrying case

• RJ45, RJ11 and RJ12 cable tester combines a Main Tester unit with a

removable Remote Tester unit

• Tests cable connectivity, determining a connection, no connection, short

or open circuit, with LED lights indicating the type of connection

•

Features modes for fast and slow ﬂashing of LEDs during automatic testing

16-07-119-9335F3-EN.indd 2 8/5/2016 9:48:43 AM

Produkt Specifikationer

Mærke:	Tripp Lite
Kategori:	Ikke kategoriseret
Model:	T016-004-K

Har du brug for hjælp?

Hvis du har brug for hjælp til Tripp Lite T016-004-K stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Tripp Lite Manualer

Tripp Lite BHDBT3-USB Manual

28 September 2025

Tripp Lite PDUMV30HV Manual

28 September 2025

Tripp Lite PDUMV30 Manual

12 August 2025

Tripp Lite Isobar ISOBLOK2-0 Manual

12 August 2025

Tripp Lite SRIN4181810 Manual

1 August 2025

Tripp Lite Protect It! TLP74RB Manual

1 August 2025

Tripp Lite SPS610HGRA Manual

1 August 2025

Tripp Lite N286-100G-SR4SA Manual

1 August 2025

Tripp Lite Protect It! TLP88USBB Manual

1 August 2025

Tripp Lite Protect It! TLP664USBB Manual

1 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Supermicro SuperStorage 6039P-E1CR16L Manual

3 Oktober 2025

Sony MRW-G3 Manual

3 Oktober 2025

GYS DIAG-BATIUM 100.12 FV Manual

3 Oktober 2025

Sony INZONE KBD-H75 Manual

3 Oktober 2025

3 Oktober 2025

3 Oktober 2025

3 Oktober 2025

2 Oktober 2025

Supermicro SuperStorage 6029P-E1CR12L Manual

2 Oktober 2025

Sony BKM-FW12 Manual

2 Oktober 2025