Uni-T UT51 Manual

Uni-T Multimeter UT51

Læs gratis den danske manual til Uni-T UT51 (20 sider) i kategorien Multimeter. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Uni-T UT51, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

Contents

A Your Meters Feature

B Speciﬁcations

C Making Measurements

D Maintenance

E Accessories

F Using Holster

G Using Strap

Introduction

One kind of UNI-T brand new UT50 series

Multimeters is a 3 1/2 digit with steady function

and highly reliable hand-held measuring instrument.

The Meter uses large scale of integrated circuit

with double integrated A/D converter as its core

and has full range overload protection. The Meter

can measure DC current, AC current, DC Voltage,

AC Voltage, Resistance, Capacitance, Diode,

Temperature, Frequency and Continuity, which is

an ideal tool for users.

Model UT51-55: OPERATING MANUAL

Safety Rules

l Do not operate the Meter before the cabinet

has been closed and screwed safely as

terminal can carry voltage.

l Make sure before each measurement the

Meter is set to the suitable range.

l Before using the Meter, please inspect the

cabinet and test leads for damaged insulation

or exposed metal.

l Connect the red and black test lead to the

correct measuring input jack properly.

l Do not input values over the maximum

range of each measurement to avoid damages

of the Meter.

l The UNI-T UT50 series comply with

IEC 61010: in pollution degree 2,

overvoltage category (CAT I 1000V and

CAT II 600V) and double insulation.

Use the Meter only as speciﬁed in this

manual, otherwise the protection provided

by the Meter may be impaired.

l CAT I-For signal level, telecommunication,

electronic with small transient over voltage.

l CAT II -For local level, appliances, main

wall outlets, portable equipment.

l The meter is designed to withstand the

stated Max. voltages. If it’s not possible

to exclude without doubts that impulses,

transients, disturbance or for other reasons,

these voltages are exceeded a suitable

prescale (10:1) must be used.

l Do not turn the rotary function switch

during Voltage and Current measurement,

otherwise the Meter could be destroyed.

Model UT51-55: OPERATING MANUAL

Produkt Specifikationer

Mærke:	Uni-T
Kategori:	Multimeter
Model:	UT51

Har du brug for hjælp?

Hvis du har brug for hjælp til Uni-T UT51 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Multimeter Uni-T Manualer

9 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

18 Marts 2025

3 September 2024

3 September 2024

Multimeter Manualer

Nyeste Multimeter Manualer

8 Juni 2025

7 Juni 2025

7 Juni 2025

6 Juni 2025

6 Juni 2025

6 Juni 2025

6 Juni 2025

6 Juni 2025

6 Juni 2025

3 Juni 2025