Uniden EXAI8580 Manual

Uniden Telefon EXAI8580

Læs gratis den danske manual til Uniden EXAI8580 (17 sider) i kategorien Telefon. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Uniden EXAI8580, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/17

At Uniden, we'll take care of you!

Thank you for purchasing a Uniden product.

If you have any questions or problems,

please do not return this product to the place of purchase.

Having Trouble?

Our customer care specialists are here to help you! Visit our website at www.

uniden.com or call our Customer Hotline at during 1-800-297-1023

regular business hours.*

Need a Part?

To order headsets, additional handsets, replacement batteries or other

accessories, visit our website at or call www.uniden.com 1-800-554-3988

during regular business hours.*

Help for our Special

Needs Customers

Uniden provides a customer service hotline for accessibility questions. If

you have disability and need customer service assistance or if you have any

questions about how Uniden's products can accommodate persons with

disabilities, please call the accessibility voice/TTY line:

1-800-874-9314 (voice or TTY).

Accessibility information can be found on our website, , www.uniden.com

under the "Accessibility" link. If your call is received outside of our business

hours, leave us a message and we will call you back.

* Central Standard Time. Detailed customer service hours are available at www.uniden.com.

Contains additional foreign articles.

Printed in China UCZZ01066BZ(0)

UNIDEN

CORDLESS

TELEPHONES

EXAI8580 Series

CUT

REMOTE OPERATION CARD

Remote access away from home

1. Call your phone number from a

touch-tone phone.

2. During the outgoing message,

press and enter your PIN code.[0]

The answering system announces the

number of messages stored in memory

and the voice prompts. The phone

stands by for you to enter a command.

3. To quit, hang up the phone.

Turn on the answering system

remotely

1. Call your phone and let it ring

10 times until it answers.

2. Press and enter your PIN code.[0]

3. Press then to stop the [0] [5]

announcement.

4. Press then to turn the [0] [6]

answering system on.

Remote Operation Card

1) Installing the Phone

1-1. Choosing the Best Location

To get the best performance out of your new phone, put it in the best location:

Near an AC outlet

and a telephone

wall jack.

• Microwave ovens

• Refrigerators

• Fluorescent

lighting

• Dust

• Excessive

moisture

• Other cordless

telephones

In a

centrally-located

open area.

PLACE YOUR BASE

• TVs

• Other electronics

• Direct sunlight

• Extreme temperatures

• Personal computers

• Wireless LAN

equipment

• Dust

• Excessive

moisture

• Areas with

a lot of

background

noise

• Shock

• Vibration

• Shock

• Vibration

TRY TO AVOID

Notes: For maximum range

Keep both the base and handset antennas free of obstruction.

When the handset is not in use, place the handset in an upright position.

Metal and reinforced concrete may aect cordless telephone performance.

•

1-2. Plug in the Battery

Use only the Uniden BT-905 rechargeable battery pack supplied with your phone.

1Locate the battery pack,

battery cover and handset. 2Line up the red and black wires

on the battery pack connector

with the sticker in the handset's

battery compartment.

3Place the cover over the

battery compartment and

slide it up into place.

Push the battery connector in firmly.

(You should hear it click into place.)

Red

Black

1Locate the battery pack,

battery cover and handset. 2Line up the red and black wires

on the battery pack connector

with the sticker in the handset's

battery compartment.

3Place the cover over the

battery compartment and

slide it up into place.

Push the battery connector in firmly.

(You should hear it click into place.)

Red

Black

1-3. Plug in the Base

Don’t put any power cord where it people might trip over it or step on it. If a power cord becomes chafed or

worn out, it can create a re or electrical hazard.

4Put the base's AC adapter cord through the hole in the stand

and connect the AC adapter to the jack.DC IN 9V

Connect the AC adapter to a standard 120V AC wall outlet.

DO NOT use an AC outlet controlled by a wall switch.

Route the cord

through the molded

wiring channel.

To AC outlet

AC adapter

(supplied)

To DC IN 9V