UPM WD633 Weerstation Manual

UPM Vejrstation WD633 Weerstation

Læs gratis den danske manual til UPM WD633 Weerstation (6 sider) i kategorien Vejrstation. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 15 anmeldelser. Har du et spørgsmål om UPM WD633 Weerstation, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/6
1
OUT
IN
TREND
TREND
MIN
MIN
MINIMUM
SETTING UP THE TRANSMITTER
GETTING STARTED
button placement
1
2
3
4
5
MINUTE/-/MIN: shows minimum
temperature; adjusts clock, alarm, date &
year and temperature alarm values
ALARM/( C/ F): toggles between , 12 and
24hourformat,Alarm1&2onandoff; disables
upper & lower temperature alarms
°°°° Cand F
CHN: scrolls through remote channels (1 to 4);
scrolls through local and remote channels (1 to 4)
in (upper & lower) temperature alarm mode
HOUR/+/MAX: shows maximum
temperature; adjusts clock, alarm, date &
year and temperature alarm values
MODE/SNOOZE: scrolls through Clock 1&2,
Alarm 1&2, Date & Year, and (Upper & Lower)
Temperature Alarm Mode; snooze for alarm
1
2
3
5
4
9
WD633 + WT440H
Wireless Weather Station
WD633
Receiver
Congratulations on your purchase of this
weather station set, WD633 + WT440H.
Please take the time to read and
understand this manual so you can begin
to enjoy the convenience and features this
product has to offer.
WT440H
Transmitter
OWNER’S
MANUAL
Main Display Unit WD633
* dual clock and dual alarm
* calendar (date/day/month/year)
* local temperature display
* receives and displays temperature and
humidity from up to 4 remote transmitters
via RF technology of 433MHz
* minimum/maximum temperature memory
* temperature and humidity trend indicator
* local/remote temperature alarms
* weather icons
* moon phase symbols
* user-selectable C or F
* battery type:2xAA
Remote Transmitter WT440H
* drip-proof design with LCD screen
* temperature display in user-selectable
Cor F
* humidity display
* transmission range: up to 40 metres in
open area
* table stand or wall mountable
* battery type:2xAA
°°
°°
MOON PHASE
MONDAY
CLOCK1
OUT
IN
TREND
TREND
MOONPHASE
MONDAY
CLOCK1
OUT
IN
TREND
TREND
MOONPHASE
MONDAY
CLOCK1
OUT
IN
TREND
TREND
:
FEATURES
Date Setting
February will have either 28 or 29 days depending on the year setting.
:
Scroll to the Date mode using .
Press to set the month.
Press to set the date.
NOTE: Weekday is automatically determined from the year/month/date setting.
MODE
HOUR/+/MAX
MINUTE/-/MIN
Year Setting
Scroll to the Year mode using
Press or key to adjust the year.
MODE
+-
:
.
CALENDAR SETTING
1
1
2
2
3
Remote (Outdoor) Temperature and Humidity
Local (Indoor) Temperature
Selecting C or F Temperature Display°°
TEMPERATURE & HUMIDITY DISPLAY
If the Learn Function is performed successfully (refer to the WIRELESS
TRANSMISSION section), the remote (outdoor) temperature and humidity will
display on the bottom of the LCD screen.
Press to toggle between
Channels 1, 2, 3 and 4.
CHN
The local (indoor) temperature will display instantly after
batteries are inserted into the receiver.
Toggle between C and F by pressing
in either Clock 1 or Clock 2 mode.
°°
C/ F
°°
*
*
A
B
B
A
NOTE: The temperature and humidity data will on the LCD screen.alternate
Min and Max Temperature
Temperature and Humidity Trend
TEMPERATURE & HUMIDITY DISPLAY
A
B
The trend indicator shows the trend of the temperature and humidity in
the past half-hour interval.
Example:
The following trend
indicates that the
temperature is rising.
Arrow Indicator
Rising Steady Falling
Trend
Press in Clock 1 mode to display
minimum temperature
The MIN symbol will appear.
MIN
.
To return to normal temperature and
humidity display, press again.MIN
To return to normal temperature and
humidity display, press again.MAX
Press in Clock 1 mode to display
maximum temperature.
The MAX symbol will appear.
MAX
NOTE: Min/Max readings are automatically cleared daily at 00:00
Based on the and data collected from the remote
transmitter (Channel 1), the receiver will display the following weather
icons on the LCD screen.
temperature humidity
WEATHER ICONS
About Freeze Warning:
NOTE:
!
!
!
The SNOW icon will blink to warn of 'freezing'.
Activated when Channel 1's temperature is between -1.9°C and 2.9°C.
The SNOW icon will appear solid if and when Channel 1's temperature
falls below -1.9°C.
!
!
!
When you first set up the weather station set, the weather icon shown on
the display will be CLOUDY.
The weather icon is based solely on the temperature and humidity data
collected from the remote transmitter Channel 1.
If Channel 1’s slot is empty, the weather icon shown on the display will
always be CLOUDY.
SUNNY CLOUDY RAIN SNOW
FREEZE
WARNING
OR OR
<flashing snow>
OUT
IN
TREND
TREND
MAX
MAX
MAXIMUM
*
*
Local Temperature
Date Setting
Year Setting
Remote Temperature Remote Humidity
1
1
B
A
2
2
3
IN
TREND
OUT
TREND
%
TREND
OUT
MONDAY
MONTH DAY
YEAR
PAGE 1
PAGE 10
PAGE 2
PAGE 11
PAGE 3
PAGE 12
6
7
8
9
C/F: changes House Code and Channel Code;
selects °C or °F
SET: activates SET function
Battery Compartment
LCD Screen
10
Battery Cover
11
Wall Mount Bracket & Table Stand
SET C/F
-
AA 1.5V
+
-
AA 1.5V
+
7
6
11
10
9
8
Remove battery cover
Set up the transmitter(s) setting up the receiverbefore
2 AA size batteries (included)
1
*
Temperature and humidity will appear and
on the LCD screenalternate
House code will blink for 8 seconds
2
3
4
5
6
7
8
9
10
Select House code (1-15) by pressing C/F
Press SET
Press SET
Channel code will blink for 8 seconds
Select Channel code (1-4) by pressing C/F
* If you have multiple transmitters for a single receiver,
set each transmitter to the House codesame
* If you have multiple transmitters for a single receiver,
set each transmitter to a Channel codedifferent
%
1
1
1
SET C/F
-
AA 1.5V
+
-
AA 1.5V
+
5
9
4
7
6
8
10
11
2
Insert batteries into compartment,
observing proper polarity
Select temperature display in C or F by pressing
°° C/F
Replace battery cover
11
12
3
1
12
1
1
MOONPHA SE
MONDAY
CLOCK1
OUT
IN
TREND
TREND
1
1
1
1
1
2
2
2
3
3
*
*
4
4
2
3
4
SETTING UP THE RECEIVER WIRELESS TRANSMISSION
WIRELESS TRANSMISSION
Automatic Learn Function:
Manual Learn Function (Remote Signal Search):
The learn function executes automatically and runs for approximately
3 minutes when batteries are first installed in the receiver.
Press and hold for 3 seconds to start.CHN
If a new remote transmitter is added or if signal is lost (outdoor
readout on the receiver is blinking), the learn function must be
executed again.
Within these 3 minutes, the receiver will pick up the temperature and
humidity signals from remote transmitter and display the reading.
Unit will beep to indicate that the learn function has started.
Channel symbol will blink and unit will continue to beep as each
remote transmitter is detected.
Within 3 minutes, the temperature and humidity reading of the remote
transmitter will display on the receiver.
TEMPERATURE ALARM TEMPERATURE ALARM
MOONPHASE
MONDAY
CLOCK1
OUT
IN
TREND
TREND
MOONPHA SE
MONDAY
CLOCK1
OUT
IN
TREND
TREND
2
Synchronized
Remove battery cover
batteries into compartment,
observing proper polarity; then
replace cover
Insert
1
2
3
2 AA size batteries (included)
3
3
1
1
4
4
2
2
*
*
3
3
2
1
WIRELESS TRANSMISSION
For optimal performance:
Place the receiver and remote transmitter side by side about 1 metre
apart, and allow the receiver and remote transmitter to synchronize
for 10 minutes before you place the remote transmitter outdoors.
Environmental factors and signals from other household devices, such
as remote entry controls, security systems, and computers, may
interfere with the wireless transmission of this product and cause
temporary reception loss. This is normal and does not affect the general
performance of this product. Stable reception will resume once the
interference ends.
The remote transmitter should be placed in a dry shaded area.
NOTE: Fog and mist will not harm the remote transmitter but
direct rain must be avoided.
Mount the remote transmitter upright avoiding metallic objects
and frames, such as window sills. Verify that there are no obstacles
like a transmission tower or steep hill that can cause interference
and blockage between the remote transmitter and receiver.
Place the receiver unit at least 2 metres away from any electrical
devices, such as your television set, computer, cordless phone, or any
radio controlled equipment.
Replace unit(s) with fresh batteries when the Low Battery Indicator
lights up. Refer to the LOW BATTERY INDICATION section.
You may need to reposition the remote transmitter to a different
location and/or closer to the receiver for the best transmission.
The is an ideal feature to be used for greenhouses
and wine cellars, or any place that you require controlled temperature.
Once activated, the temperature alarm would sound when the room gets
too warm or too cold depending on your settings.
temperature alarm
You can set both an upper and lower temperature alarm for the local
temperature (main receiver unit) and/or for each of the remote
(outdoor) channels of 1 to 4.
Scroll to the Upper Temperature Alarm Setting mode by pressing .
You should see the symbol and dotted lines ( ) or pre-existing
setting blink.
MODE
---
Scroll to the Lower Temperature Alarm Setting mode by pressing .
You should see the symbol and dotted lines ( ) or pre-existing
setting blink.
MODE
---
Select the desired channel, local or remote channels (1 to 4) using .CHN
Select the desired channel, local or remote channels (1 to 4) using .CHN
Press to finish; or rMODE epeat steps for all
other channels if desired.
Press to finish; or rMODE epeat steps for all
other channels if desired.
NOTE: In the normal clock display, when either the upper or lower
temperature alarm has been set for a particular channel, the or
symbol will show up solid on the LCD screen when that channel is displayed.
Press or key to set the desired value for the upper temperature limit.+-
Press or key to set the desired value for the lower temperature limit.+-
To disable the particular alarm, press .
The dotted lines ( ) would reappear to indicate
that the alarm has been disabled.
ALARM
---
To disable the particular alarm, press .
The dotted lines ( ) would reappear to indicate
that the alarm has been disabled.
ALARM
---
WD633 Receiver
LOW BATTERY INDICATION
Replace the batteries when the Low Battery Indication ( ) lights up on
the middle-left portion of the LCD screen on the WD633 receiver.
NOTE: After replacing the batteries, you will need to perform the Setup and
Learn Function procedures again. Refer to the SETTING UP THE
TRANSMITTER/RECEIVER and WIRELESS TRANSMISSION sections.
A
A
C
Setting the Upper Temperature Alarm
Setting the Lower Temperature Alarm
UPPER TEMPERATURE LIMIT: warmIf the temperature gets too
and reaches the upper temperature limit, the alarm would sound.
LOWER TEMPERATURE LIMIT: coldIf the temperature gets too
and reaches the lower temperature limit, the alarm would sound.
MOONPHASE
MONDAY
CLOCK1
OUT
IN
TREND
MOONPHASE
MONDAY
CLOCK1
OUT
IN
TREND
When the Temperature Alarm Sounds
The temperature alarm will sound when the actual temperature has
reached (or exceeded) the upper or lower temperature limit.
The temperature alarm has a distinctive tone different to that of
Alarm 1 or Alarm 2.
or symbol and temperature limit will blink
Press ANY key to stop the temperature alarm. Or without interruption,
the temperature alarm will automatically stop after one minute.
PAGE 4
PAGE 13
PAGE 5
PAGE 14
PAGE 6
PAGE 15
1
1
1
1
4
WT440H Remote Transmitter
Replace the batteries when the Low Battery Indication lights up on
the bottom-left corner of the LCD screen on the WT440H transmitter.
When the batteries are low on a transmitter, a Low Battery Indication
( ) will also light up on the bottom-left corner of the LCD screen on
the WD633 receiver for that particular channel.
B
C
1
B
2

Produkt Specifikationer

Mærke: UPM
Kategori: Vejrstation
Model: WD633 Weerstation

Har du brug for hjælp?

Hvis du har brug for hjælp til UPM WD633 Weerstation stil et spørgsmål nedenfor, og andre brugere vil svare dig


Vejrstation UPM Manualer

UPM

UPM WS290C - WT440H Manual

23 August 2024
UPM

UPM WS222 - WT440 Manual

22 August 2024
UPM

UPM WS1200 - WT440 Manual

20 August 2024
UPM

UPM W2S100 Manual

7 August 2024
UPM

UPM WS222 Manual

4 August 2024
UPM

UPM WT440H Manual

1 August 2024
UPM

UPM WT440 Manual

25 Juli 2024
UPM

UPM WS298 Manual

24 Juli 2024
UPM

UPM TC381 Manual

24 Juli 2024
UPM

UPM WT440H Weerstation Manual

9 Juli 2024

Vejrstation Manualer

Nyeste Vejrstation Manualer

La Crosse Technology

La Crosse Technology TX145WSDR Manual

31 Juli 2025
La Crosse Technology

La Crosse Technology 328-1415 Manual

31 Juli 2025
La Crosse Technology

La Crosse Technology 308-1711BLV3 Manual

31 Juli 2025
Edenwood

Edenwood WS657 Manual

30 Juli 2025
Edenwood

Edenwood E015 Manual

30 Juli 2025
Edenwood

Edenwood WS672 Manual

29 Juli 2025
Sencor

Sencor SWS 11000 Manual

27 Juli 2025
Sencor

Sencor SWS TH270 Manual

26 Juli 2025
Sencor

Sencor SWS 4000 Manual

26 Juli 2025
Marquant

Marquant 943-112 Manual

25 Juli 2025