Vax Power 5 C90-P5-E-S Manual

Vax Støvsuger Power 5 C90-P5-E-S

Læs nedenfor 📖 manual på dansk for Vax Power 5 C90-P5-E-S (16 sider) i kategorien Støvsuger. Denne guide var nyttig for 26 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/16
BAGLESS CYCLONIC
CYLINDER VACUUM
C85-P5-Be
C85-P5-Pe
LET’S GET STARTED.
Power5
Let’s talk safety
Basic
safety
precautions
Don’ts
Do’s
This vacuum cleaner is intended for household use only and
NOT for commercial or industrial use.
• Only use the vacuum cleaner indoors on dry surfaces and
keep the area your cleaning well lit.
• Keep ngers, hair and loose clothing from moving parts and
openings whilst using the vacuum cleaner.
• Don’t use this vacuum cleaner if it has been dropped,
damaged or left outdoors.
• Don’t run over the power cord or use vacuum cleaner if the
power cord or plug is damaged. Please contact our Customer
Care Line on: 0330 026 8455 (Mon-Fri: 8:30am to 6:30pm,
Sat: 9:00am to 5:00pm).
• Don’t handle the plug or use the vacuum cleaner with
wet hands.
• Don’t pull or carry this vacuum cleaner by the power cord.
• Don’t use the power cord as a handle, pull the power cord
around corners, sharp edges or close a door over the
power cord.
• Don’t unplug vacuum cleaner by pulling on the power cord.
• Turn o all controls on the vacuum cleaner before
disconnecting or connecting the power cord.
• Always make sure both the pre-motor/post motorlters are
in place before use.
• Always switch o the vacuum cleaner before disconnecting
or connecting the hose and accessories.
• Keep all openings clear and free from debris as this may
aect the airow/suction.
• Always replace the fuse in the plug with a British 13amp fuse.
Thank you for buying this Power 5.
Taking care of your carpets and hard oors
The Power 5 is designed to make vacuuming carpets and hard oors regularly, as eective and
ecient as possible and this user guide will help you get the most out of your machine.
Maintaining your carpets and hard oors will ensure they keep their appearance for longer.
You’ve chosen the carpets and hard oors for your home for a reason and Vax will help you
take good care of them.
Taking care of your Power 5
Also inside this guide are instructions on maintaining your new machine, so that it’s always
ready when you are to tackle your carpets and hard oors.
Taking care of you
We’re here if you need us. Instead of taking me back
to the shop, simply visit:
vax.co.uk/support or call:
(UK) 0330 026 8455 (ROI) 1-800 928 308
Monday-Friday 8:30am to 6:30pm, Saturday 9:00am to 5:00pm
Calls are charged at the UK local rate. Please make a note of the serial number and model number
of the product before calling.
Alternatively, you can write to us at:
Vax Ltd., Plot 302, Stonebridge Cross Business Park, Hampton Lovett, Droitwich, WR9 0LW, UK
This User Guide can be found online at: vax.co.uk/support
Contents
Let’s talk safety
Getting to know your machine
Getting started
Using your machine
Taking care of your machine
Let’s talk technical
Accessories
What to do if it goes wrong
Getting in touch
Included with
your machine
Accessory Hose
Combination
Floorhead
Tool Connector
TurboTool
Telescopic
Extension Tube
Initial Setup for normal operation
1. Use the base accessories.
a. Shortest hose.
b. Extension tube set to shortest practicable length.
2. Clean lters installed.
3. Dust receptacle empty.
4. All Bleeds must be closed.
5. Floorheads/tools set to Carpet Mode for carpet cleaning.
6. Mechanical Agitation turned ON for carpet cleaning.
7. Floorheads/tools set to Hard Floor Mode for hard oor cleaning.
8. Mechanical Agitation turned OFF for hard oor cleaning.
Power 5 Pet
All the above, plus
Power 5
(Included with all models)
3-in-1 Tool
Getting to know your machine
Technical Specication
Name Power 5
Voltage See rating label on machine for details
Wattage See rating label on machine for details
Cord length 5m
Weight 4.7kg
Subject to technical change without notice.
Accessories & Consumables
Filter Kit (Type 95)*
1-1-134231-00
Pro Cleaning Kit (Type 2)
1-1-133326-00
TurboTool (Type 6)
1-1-134419-00
Hard oor tool (Type 3)
1-1-135705-00
*To purchase consumables and accessories, please visit vax.co.uk
Carry handle
Dirt container release button
Cord rewind button
Hose entry point
Power On/O button
Wheel outer
Dirt container lid
Post motor lter
(hidden) and cover
Dirt container
Separator and shroud
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Getting started
Before you begin cleaning
• Always switch o and unplug the vacuum cleaner before connecting or disconnecting the hose/attachments,
or removing and emptying the dirt container.
• The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat the
thermostat will automatically turn the vacuum cleaner o. If this happens, switch the vacuum cleaner o and unplug
from electrical socket. Remove and empty the dirt container also check the vacuum cleaner for blockages. Allow the
vacuum cleaner to cool for approximately 1 hour (if you have cleaned the lters please wait 24 hours for the lters
to fully dry before putting back into the vacuum machine).
• Tap the pre-motor lter over a bin every 4-6 uses to remove dirt/debris.
• If the vacuum cleaner is blocked, switch o and unplug before removing the blockage.
Assembling your cylinder
Click!
Press both buttons at the end of the
hose and push hose into the hose
entry point.
Insert the hose grip into the
telescopic extension tube. Press the
button on the telescopic extension
tube and adjust to required length.
Insert the other end of the telescopic
extension tube into the oor head.
Fully unwind the power cord.
A yellow mark on the cord indicates
the recommended cord length.
Do not exceed the cord beyond the
yellow mark.
Plug in and switch the unit on by
pressing the power button.
How to use
When unwinding the
power cord always pull
out to the yellow marker
but no further.
CAUTION
Using your machine
Slide vent cover on hose grip open
to reduce suction if required.
Lower brushes for hard oors.
How to use
IMPORTANT: The base of the vacuum cleaner should always be positioned at on the oor when starting and in use.
The dirt container should be locked into place before lifting the vacuum cleaner by the carry handle.
For use on carpets, click rocker
switch forward.
For use on hard oors click rocker
switch back.
Raise brushes for carpets.
TIP
Brushes on the
oorhead should be
visible when using on
hard oors.
Press the cord rewind button
to retract the cord into the
vacuum cleaner.
Place the oor head into the parking slot on the back of vacuum cleaning for
storage and carrying.
Using your machine
Choose an accessory. Choose an accessory and push onto
the telescopic extension tube or hose.
If required use tool connector.
Using accessories
Storage
Taking care of your machine
Cleaning the pre-motor lter
Remove dirt container
by pushing down the dirt
container release button
and lifting the dirt container.
Hold the dirt container and
twist the lid anti-clockwise.
Tap the pre-motor lter
against a bin to remove
any dirt/debris.
Leave to dry for 24 hours or
until fully dry before placing
back in the machine.
Rinse the pre-motor lter
under water (max 40°C).
T
AP
MAX
40˚C
!
MAX
40˚C
24hr
Lift the lid to reveal the
pre-motor lter.
Hold the dirt container over a
bin. Press the dirt release clip
at the bottom of the container,
the dirt release door will open
allowing dirt/debris to fall out.
Lift out the pre-motor lter.
Emptying and cleaning the dirt container
IMPORTANT: Always switch o and unplug the vacuum cleaner from the electrical socket before assembling,
opening or emptying the dirt container, or before connecting/disconnecting the attachments.
Check the pre-motor lter every time you empty the dirt container and tap against a bin to remove
dirt/debris if required.
The motor is equipped with a thermal cut-out. If for any reason the unit should overheat, the thermostat will
automatically turn the unit o.
Hold the dirt container and twist the
lid anti-clockwise.
Cleaning the shroud
Lift the lid to reveal the
pre-motor lter.
Lift out the pre-motor lter.
Twist the separator cap anti-
clockwise to unlock and remove.
Lift and remove the separator from
the dirt container.
Tap the separator against a bin to
remove any dirt/debris.
Make sure the rectangular hole in
the dirt container lines up with the
rectangular hole on the separator.
Replace the separator cap,
twist clockwise to lock.
Replace the pre-motor lter. Close
dirt bin lid making sure it clicks and
locks into place.
Taking care of your machine
Let’s talk technical
Slide the locking ring
to remove.
Lift and separate
the housing.
Using a pair of scissors,
cut any hair or debris free
from around the brushes.
Removing blockages from the TurboTool (some models only)
Tabs
Line up the tabs on front of
housing and push together
to ret. Slide locking ring
into groove to secure.
Removing blockages from the hose
Post-motor lter maintenance
Post-motor lter is located in the
right side wheel. Hold the centre
of the wheel and twist wheel cover
anti-clockwise.
With the wheel cover o the
post-motor lter is easily removed.
IMPORTANT: The exhaust lter is designed to oer long life with no maintenance. The lter should be checked
periodically and when heavily discoloured it should be replaced. Please do not wash, scrub or brush the lter
as this will damage the delicate lter media.
CAUTION: Do not wash the post-motorlter.
Check the post-motor lter
for discolouration.
Remove the hose from the vacuum cleaner and telescopic
extension tube. Insert a broom handle or similar blunt
instrument into the hose to remove blockage.
TIP
To test for a blockage in
the hose, drop a small
ball of paper into the
hose. The paper will
drop through if the
hose is clear.
Accessories
Pro Cleaning Kit (Type 2)
1-1-133326-00
All our best tools all in one kit that makes cleaning
your home quicker, easier and with even better
results. We’ve taken care of cleaning all of the hard
to reach areas such as on top of cupboards and in
between blinds to the dust that collates behind and
within the radiator.
Don’t forget your accessories!
Order at: www.vax.co.uk/spares-and-solutions
TurboTool (Type 6)
1-1-134419-00
Use the TurboTool for vacuuming your stairs,
upholstery and car interiors. It’s great for picking
up stubborn pet hair.
Fur ‘n’ Flu Tool
1-1-131392-00
Specically designed to remove extra stubborn
pet hair from upholstery, furniture and carpets.
What to do if it goes wrong
SolutionProblem
CAUTION: To reduce the risk of personal injury, unplug the product before performing maintenance
/troubleshooting checks.
• Check the ‘This pack contains’ panel on the box to make sure
the part is included with your machine.
There is an
accessory missing.
• The dirt container may not be correctly tted, remove the dirt
container from the vacuum cleaner and check it’s assembled correctly,
ret ensuring it’s locked into place.
• The shroud is blocked. Go to ‘Taking care of your machine’.
• The separator and shroud are incorrectly tted. Go to ‘Taking care
of your machine’.
• The lter may be clogged, clean the lter. Go to ‘Taking care of
your machine’.
• The dirt container may be blocked, empty the dirt container.
Go to ‘Taking care of your machine’.
• There may be a blockage in the hose/tube. Disconnect from the
vacuum cleaner and carefully remove any blockages.
Go to ‘Let’s talk technical’.
Why won’t the
vacuum cleaner
pick up?
• The plug may not be fully pushed into the electrical socket.
• Check the fuse in the plug if this needs replacing, always replace
with a 13amp fuse.
• The motor thermostat may have tripped. If this has happened,
unplug the vacuum cleaner. Remove and empty the dirt container
and check the hose for blockages. Clean the lters and allow the
vacuum cleaner to cool for approximately 1 hour (if you have washed
the lters you will need to wait 24 hours for the lters to fully dry
before putting them back into the vacuum cleaner).
Why does my
vacuum cleaner
have no power?
• The lters may be clogged, clean the lter. Go to ‘Taking care
of your machine’.
Why is dust escaping
from the vacuum?

Produkt Specifikationer

Mærke: Vax
Kategori: Støvsuger
Model: Power 5 C90-P5-E-S

Har du brug for hjælp?

Hvis du har brug for hjælp til Vax Power 5 C90-P5-E-S stil et spørgsmål nedenfor, og andre brugere vil svare dig


Støvsuger Vax Manualer

Vax

Vax Grab & Go VHV22I2 Manual

10 Februar 2025
Vax

Vax Compact VX56 Manual

10 Januar 2025
Vax

Vax Atractivo VST144VL Manual

25 December 2024
Vax

Vax Pet VX75 Manual

20 September 2024
Vax

Vax Pet VX38 Manual

20 September 2024
Vax

Vax Gator Pet 18V VX35 Manual

20 September 2024
Vax

Vax Air Revolve VX29 Manual

20 September 2024
Vax

Vax Air Silence VX13 Manual

20 September 2024
Vax

Vax Air Silence VX12 Manual

20 September 2024
Vax

Vax Power 5 Pet VX28 Manual

20 September 2024

Støvsuger Manualer

Nyeste Støvsuger Manualer

Numatic

Numatic Hetty Quick HTY100 Manual

9 April 2025
Bosch

Bosch Unlimited 7 BCS712E Manual

8 April 2025
Ghibli & Wirbel

Ghibli & Wirbel POWER EXTRA 21 Manual

8 April 2025
Ghibli & Wirbel

Ghibli & Wirbel POWER EXTRA 31 Manual

8 April 2025
Ghibli & Wirbel

Ghibli & Wirbel POWER EXTRA 7 Manual

8 April 2025
RYOBI

RYOBI One+ P714K Manual

8 April 2025
Concept

Concept VP8224 Manual

30 Marts 2025
LG

LG V-C7262HT Manual

26 Marts 2025
Xiaomi

Xiaomi Mi Vacuum Cleaner Light Filter Manual

25 Marts 2025
Philips

Philips Performer Expert FC8723 Manual

22 Marts 2025