Ventev TW-HCEN-FLP Manual

Ventev Ikke kategoriseret TW-HCEN-FLP

Læs gratis den danske manual til Ventev TW-HCEN-FLP (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 80 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 40.5 anmeldelser. Har du et spørgsmål om Ventev TW-HCEN-FLP, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

www.ventev.com/infra sales@ventev.com 800.851.4965

Universal Flush Mount

Ceiling Enclosure Installation

Instructions for Installation

1) To install the flush mount, cut an opening into the

ceiling drywall as shown in Figure 1. (TIP: Drill

holes at the corners of the cutout and cut between

the holes.) The chamfered corners of the profile

are necessary to allow the lid to completely cover

the cutout.

Figure 1. Figure 2.

2) Loosen the thumbscrews on the backplate of the base

assembly and remove.

3) Rotate the clamp arms in so they are against

the base as shown. With the base held close

to the ceiling opening, route the ethernet cable

through the knockout hole in the base. A

Romex connector is supplied to securely clamp

the cable to the enclosure.

Figure 3. Figure 4.

4) Insert the base into the ceiling opening, making sure

that the sides of the base with the clamp arms are in

line with the 11 ¼” sides of the opening.

www.ventev.com/infra sales@ventev.com 800.851.4965

Universal Flush Mount

Ceiling Enclosure

5) Holding the base in the ceiling, turn the 4 plastic

screws with a screwdriver until the drywall is

clamped between the clamp arms and the base

flanges.

6) For the Cisco Low Profile Universal Bracket, install

using the included #8-32 screws (QTY 4) . Additional

AP mounting options shown in Figure 6B.

Figure 5. Figure 6A.

Meraki MR 33 & 42 Cisco Universal Bracket Optional T Bar Bracket

Figure 6B.

Sheet metal screws (Qty 4) are provided to attach other AP brackets.

Produkt Specifikationer

Mærke:	Ventev
Kategori:	Ikke kategoriseret
Model:	TW-HCEN-FLP
Bredde:	- mm
Dybde:	- mm
Højde:	- mm
Vægt:	1590 g
Velegnet til:	Indendørs
Produkttype:	WLAN-adgangspunktmontering
Materiale:	Aluminium, PVC
Installationsmuligheder:	Loftsmonteret