Victrola VPT-800 Manual


Læs gratis den danske manual til Victrola VPT-800 (10 sider) i kategorien Pladespiller. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Victrola VPT-800, eller vil du spørge andre brugere om produktet?

Side 1/10
INSTRUCTION MAN UAL
VPT-80 0
A U T O M AT I C
Turntable
Dust cover
Platter with belt
Slipmat
45 RPM adapter
Power adapter / RCA cable
U N PAC K
Plug in power adapter.
Place 45 RPM adapter in corner compartment.
Remove foam support from back of tonearm.
Remove tonearm twist tie.
Remove tape and clear stylus cover.
Note: Gently pull stylus cover forward to remove.
P R E PA R E T U R N TA B L E
LOCATE TH E FOL LOWING ITEMS
Lower the platter on to the turntable.
Rotate the platter until the hole with the white ribbon is directly over the gold motor.
Pull both ends of the ribbon outward until the belt is extended past the motor.
Slowly release the belt until it is secured around the motor, then remove the ribbon.
Note: Ensure the belt is at against the motor and not twisted.
Place the slipmat on the platter.
I N S TA L L P L AT T E R
PL ACE T URNTABLE ON A FLAT AND LE V EL SUR FACE
COMPLETE ALL STEPS BEFORE USE


Produkt Specifikationer

Mærke: Victrola
Kategori: Pladespiller
Model: VPT-800

Har du brug for hjælp?

Hvis du har brug for hjælp til Victrola VPT-800 stil et spørgsmål nedenfor, og andre brugere vil svare dig