Vivotek FD9365-HTVL Manual


Læs nedenfor 📖 manual på dansk for Vivotek FD9365-HTVL (23 sider) i kategorien sikkerhedskamera. Denne guide var nyttig for 19 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/23
VIVOTEK
User's Manual - 1
Smart Motion Detection
User Guide
The traditional motion detection relies heavily on the detection of pixel changes or motion
vectors, and false alarms can be triggered by swaying trees, clouds floating by, or even the
appearance of little animals. The Smart Motion detection, with Human detection and tunable
time lter, can eliminate the defects of traditional motion detection and facilitate the conguration
at a surveillance site.
A key feature in the Smart Motion detection is the Human detection. Based on a human
silhouette database and the rapid responses via an artificial neural network technology, the
Smart engine instantly recognizes human appearances in a video surveillance area. Since
humans are the objects of interest in the majority of video surceillance, the Human detection
feature enables users to quickly congure his installation.
With Human detection, light changes or swaying vegetation, vehicles passing by, or animal
activities in the scene are not taken as event triggers. Only human activities will trigger an event.
This helps reduce false alarms and the time and efforts for a camera conguration.
Swaying trees
Vehicles passing by
Moving shadows
Non-human
moving objects
Human
detected as objects of interest
The activity data collected by the camera is displayed in comprehensive graphs and bar charts.
You can monitor and compare the historical data acquired through a span of time and ne-tune
the detection parameters with the ease of use of a graphical interface.
VIVOTEK
2 - User's Manual
Applicable Cameras:
Please refer to VIVOTEK’s VCA package and camera documentation on the website.
The majority of VIVOTEK’s latest camera models will come embedded with this utility.
Revision History
■ Rev. 1.0: Initial release
■ Rev. 1.1:
* The Human Detection feature can be enabled/disabed on each individual motion window.
* Supports conguration in the MS9390 panoramic eld of view.
* If the Motion window is located outside of the optimal human detection area, the Human
Detection feature checkbox is automatically disabled.
* Motion window statuses have been adjusted. See page 17.
Requirements for Running the Smart Motion Detection:
1. The embedded video tracking and counting analysis requires a monitoring session on
Microsoft IE 10 or IE 11 browser.
If you open a console with a non-IE browser, the Smart Motion stream must be
congured to be streaming in MJPEG.
2. Lens cleanliness is also required because dust spots or smears on dirty lens can
produce miscalculation of pixels, correlation, and movements.
3. For other installation concerns, please refer to page 9, Considerations.
4. Avoid glass and reective materials, such as aluminum foils, in the eld of view. If
unavoidable, you can use the Exclusive area settings to get rid of the side effects.
5. Make sure the camera is installed appropriately above the area of your interest, e.g.,
an entrance to building. Installation at an extremely busy area, e.g., a square or cross
road section with dozens of passengers per minute, may not apply due to the system
computing load.
6. Due to the system load, do not open two conguration web consoles at the same time.
IMPORTANT:
The effectiveness of the Smart Motion detection slightly diminishes for objects lower than
130cm, such as children.
NOTE:
VIVOTEK
User's Manual - 3
Considerations
Note the following when planning the camera installation:
1. The installation site must be adequately lighted for optimal accuracy with video
detection.
2. In the night mode, congure a schedule prole for the different lighting condition. In the
night mode, the Smart Motion works if additional lighting is provided, e.g., using the on-
board IR light.
Installation
height
Measured to the
approx. lens position.
Not to the ceiling.
6.5cm
3. Make sure you measure the height of your camera. The height information is important
for the accuracy of the video analytics results. Some of the other perspective
information are automatically collected by the onboard S-sensor. The height information
enables the horizontal and vertical keystone corrections of the eld of view. Measure
the distance between camera lens and the ground.
VIVOTEK
4 - User's Manual
3. Because the horizontal and vertical keystone corrections are performed for an accurate
detection, the height and tilt information of the camera must be correctly congured.
Use a laser distance meter to measure the installation height. The height information
MUST BE correctly measured and entered in the camera's conguration page.
Only part of the human is covered
by the detection area.
Field of View
Detection area
4. For Human detection, as long as a human silhouette is detected in the eld of view, and
his feet travelled through the Human detection area, he can be detected. Due to the
visual perspective of lens, sometimes the entire body may not be all contained by the
detection area.
OR
OR
Horizontal keystone correction
Vertical keystone correction
VIVOTEK
User's Manual - 5
5. A man sitting, squated, or men lying on the oor may not be detected as a human,
because his silhouette has been destroyed. Detection may also be affected when
a human form is changed, e.g., a man's body is hidden behind a counter, or a man
showing only the upper half of his body by leaning on a desk.
Due to the optic concave characteristics of a lens, men can be temporarily blocked
behind other men. When a man's head-shoulder feature is consealed, he may not be
detected for the short moment.
FOV
Detection area
6. If the Human detection feature is not used, unnecessary objects should be avoided. A
door, a oating curtain, and moving objects such as an escalator can cause mistakes
with the detection.
VIVOTEK
6 - User's Manual
8. Some other possible sources of interference may include: shadows on the wall,
mirrored object image on the reective surface.
7. The Human detection takes effects with standing or walking people. There is a limitation
that the detection may not handle more than 30 people in the eld. The eld of ew
cannot cover a terraced structure.
VIVOTEK
User's Manual - 7
Conguration:
1. Open a web console to the camera. Enter the Conguration > Applications > Package
management page. Click on VCA package to open the monitoring and conguration page.
You can also access the feature through Conguration > Applications > Motion detection.
VCA package
2. The utility defaults to the Main page. Click on the Settings button on the upper-right corner
to enter the Settings page. Note that if the Human detection feature is not enabled, the Human
detection area does not display.
VIVOTEK
8 - User's Manual
3. Enter the correct installation height. For the FD and IB 9xxx series that come with a G sensor,
the Camera shooting angles (Tilt and Roll) can be automatically acquired. Select the Auto mode.
If using models that are not equipped with a G sensor, you can manually enter the tilt and roll
angles.
Note that the tilt angle corelates to the absolute downward direction. If a camera is
installed on a ceiling, and its lens points straight downward, its tilt angle is 0 degree. If
your camera lens is tilted, enter the angle related to the vertical line, e.g., 60º as shown
below.
30°
60°
The roll angle is one that refers to the horizontal level line.


Produkt Specifikationer

Mærke: Vivotek
Kategori: sikkerhedskamera
Model: FD9365-HTVL

Har du brug for hjælp?

Hvis du har brug for hjælp til Vivotek FD9365-HTVL stil et spørgsmål nedenfor, og andre brugere vil svare dig




sikkerhedskamera Vivotek Manualer

sikkerhedskamera Manualer

Nyeste sikkerhedskamera Manualer

AVer

AVer PTZ330UNV2 Manual

24 Februar 2025
Axis

Axis F2137-RE Manual

23 Februar 2025
Iluv

Iluv mySight 2K Manual

21 Februar 2025
Moen

Moen Flo 900-002 Manual

19 Februar 2025
IDIS

IDIS DC-T4217WRX Manual

13 Februar 2025
IDIS

IDIS DC-S6281HX Manual

13 Februar 2025
IDIS

IDIS DC-T4517WRXP Manual

13 Februar 2025
IDIS

IDIS DC-D4831HRX-A Manual

11 Februar 2025
IDIS

IDIS DC-D4237RX Manual

11 Februar 2025