Vulcan ER50 Manual

Vulcan Frituregryde ER50

Læs gratis den danske manual til Vulcan ER50 (2 sider) i kategorien Frituregryde. Denne vejledning er vurderet som hjælpsom af 50 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 25.5 anmeldelser. Har du et spørgsmål om Vulcan ER50, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Item # C.S.I. Section 11420

F R Y E R S

P.O. Box 696 ■ Louisville, KY 40201 ■ Toll-free: 1-800-814-2028 ■ Local: 502-778-2791 ■ Quote & Order Fax: 1-800-444-0602

a division of ITW Food Equipment Group LLC

F32900 (08/18)

Model 1ER50D

Shown with caster accessory

SPECIFICATIONS

Electric deep fat fryer, Vulcan Model No. (1ER50A) (1ER50D)

(1ER50C). Temperature controls are adjustable from 200°F to

390°F and multiple fat melt cycles and high limit control. Stainless

steel cabinet with four 6" adjustable legs. 16 gauge stainless steel

fry tank holds 50 lbs. of frying compound. 1

1⁄4" full port ball type

drain valve. 17kW low watt density ribbon style heating elements.

Twin fry baskets. Power supply is 208 volt, 50/60 Hz, 3 phase.

Overall Dimensions:

151⁄2"w x 343⁄8"d x 397⁄16"h working height is 353⁄4".

NSF listed. CSA design certied.

Specify voltage when ordering.

1ER50A Solid state analog knob control.

1ER50D Solid state digital controls.

1ER50C Programmable computer controls.

STANDARD FEATURES

■Stainless steel cabinet.

■Set of four 6" adjustable legs.

■16 gauge stainless steel fry tank, 50 lb. capacity.

■Ten year limited fry tank warranty.

■1

1⁄4" full port ball type drain valve.

■17 kW low watt density ribbon style heating elements.

■Multiple fat melt modes.

■High limit control.

■Twin fry baskets with plastic coated handles.

■208 volt, 3 phase.

■One year limited parts and labor warranty.

CONTROLS

1ER50A Solid state knob control. Accurate temperature

control 200°F to 390°F within +/- 2°. Multiple fat melt

modes, fast recovery.

1ER50D Solid state digital read temperature control. Accurate

temperature control 200°F to 390°F within +/- 2°.

Multiple fat melt modes, fast recovery and boil out

mode and two countdown timers.

1ER50C Computer control digital read temperature control.

Accurate temperature control 200°F to 390°F within

+/- 2°. Multiple fat melt modes, fast recovery and

boil out mode. Ten programmable product keys and

ten countdown timers. Secondary and advanced

programming options.

OPTIONAL FEATURES (Factory Installed)

Second year extended limited parts and labor warranty.

ACCESSORIES (Packaged & Sold Separately)

Stainless Steel Tank Cover – doubles as a work surface top

Set of four 6" adjustable casters (2 locking)

Extra set of Twin Fry Baskets – 61⁄2"w x 131⁄4"d x 6"h

Large Single Fry Basket – 13"w x 131⁄4"d x 51⁄2"h

Frymate™ VX15S Dump Station

Connecting Kit(s) – connect two fryers together (banking

strip, brackets and hardware)

10" high stainless steel removable splash guard

1ER50 SERIES

FREE STANDING ELECTRIC FRYERS

P.O. Box 696 ■ Louisville, KY 40201 ■ Toll-free: 1-800-814-2028 ■ Local: 502-778-2791 ■ Quote & Order Fax: 1-800-444-0602

a division of ITW Food Equipment Group LLC

F R Y E R S

F32900 (08/18)

1ER50 SERIES

FREE STANDING ELECTRIC FRYERS

INSTALLATION INSTRUCTIONS

SERVICE CONNECTIONS:

1. Each tank requires it's own separate power supply.

2. Power supply for basket lifts and/or lter motor is wired into

the fryer’s high voltage line terminal block, except for 480V

which requires a separate 120V single phase electrical power

connection NEMA 5-15P service for the basket lifts and lter

motor, (not supplied with fryer).

NOTE: In line with its policy to continually improve its product,

Vulcan reserves the right to change materials and specications

without notice.

1. An adequate ventilation system is required for Commercial

Cooking Equipment. Information may be obtained by writing to the

National Fire Protection Association, Batterymarch Park, Quincy,

MA 02269. When writing refer to NFPA No. 96.

2. All models require a 6" clearance at both sides and rear adjacent

to combustible construction.

3. All models require a 16" (407 mm) minimum clearance to adjacent

open top burner units.

4. This appliance is manufactured for commercial installation only

and is not intended for home use.

ELECTRICAL CHARACTERISTICS

Model

Number

Total kW

Connection

3 PH Loading

kW per Phase

Nominal Amps per Line Wire

3 Phase

208 volt 480 volt 208 volt 480 volt

X-Y X-Z X Y Z X Y Z

1ER50 17 5.6 5.6 47 47 47 20 20 20

This appliance is manufactured for commercial use only and is not intended for home use.

15.50"

(394)

13.69"

(348)

.94"

(24)

15.50"

(394)

3.38"

(86)

34.38"

(873)

49.19"

(1249)

53.33"

(1355)

39.44"

(1002)

6.00"

(152)

28.88"

(734)

35.78"

(909)

25.25"

(641)

21.75"

(552)

Produkt Specifikationer

Mærke:	Vulcan
Kategori:	Frituregryde
Model:	ER50

Har du brug for hjælp?

Hvis du har brug for hjælp til Vulcan ER50 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Frituregryde Vulcan Manualer

24 August 2024

24 August 2024

24 August 2024

24 August 2024

24 August 2024

24 August 2024

24 August 2024

24 August 2024

24 August 2024

24 August 2024

Frituregryde Manualer

Nyeste Frituregryde Manualer

Team FT 10 Manual

12 Marts 2025

Termozeta Frittosnella 3.5 Manual

5 Marts 2025

Philips Airfryer HD9875 Manual

19 Februar 2025

Philips Essential XL Airfryer HD9270 Manual

19 Februar 2025

Tefal XXL Dual Easy Fry EY942HG0 Manual

12 Februar 2025

Baccarat The Healthy Fry Compact Manual

7 Februar 2025

Philips NA154 Manual

7 Februar 2025

Imarflex IAF-761DH Manual

2 Februar 2025

American Range AF50-25 Manual

18 Januar 2025

American Range AF25-25 Manual

16 Januar 2025