Watson C-AM-2E Manual

Watson Ikke kategoriseret C-AM-2E

Læs gratis den danske manual til Watson C-AM-2E (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Watson C-AM-2E, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Thank you for choosing Watson Pro

Please read this user manual carefully and keep

it for reference before using the charger.

C-AM-2E

C-VM-2E

Dual Position

Li-ion Battery Charger

with DC Output

SAFETY INSTRUCTIONS

Do not store, place, or use the charger where it may come into contact with

excess heat, water, or moisture.

High-voltage internal components present the risk of electrical shock.

Make sure the XLR cable is securely locked into the port before use. You should

hear an audible click.

Charge only at room temperature on a dry, vibration-free surface.

Should you ever notice smoke or a strange odor coming out of the charger,

immediately unplug the AC adapter from the power outlet. Using the charger

under these conditions can cause fire and electric shock.

Do not short-circuit the terminals of your battery or charger.

Do not attempt to disassemble any part of the charger.

Use this charger with Watson Pro batteries only.

The charger, adapters, and batteries may feel warm during the charging process.

This is normal.

Remove any battery after fully charged.

Unplug the AC cable or 4-pin XLR cable from the power outlet and clean the area

around the prongs of the plug when necessary. The presence of dust around the

prongs can cause fire.

ATTACHING AND CHARGING A BATTERY

1. Deploy the charger stand legs, and place the charger on a flat surface.

2. Use the included AC power cable to connect the charger to a power source.

3. Align the 3-stud mount (C-AM-2E) or V-Mount (C-VM-2E) on the battery with the

appropriate slots in the charger.

4. Slide the battery into place to lock. You should hear a click.

5. Flip the charger's power switch to the On position.

CONNECTING DEVICES

1. Use the included 4-pin XLR cable and plug the male end into the charger's DC

output port until it clicks.

2. Plug the other end of the 4-pin XLR cable into your device. This can be a video

camera or monitor as well as lighting fixture.

RELEASING A BATTERY FROM THE CHARGER

1. Press and hold the battery release latch.

2. Slide the battery out, and separate it from the charging plate.

Produkt Specifikationer

Mærke:	Watson
Kategori:	Ikke kategoriseret
Model:	C-AM-2E

Har du brug for hjælp?

Hvis du har brug for hjælp til Watson C-AM-2E stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Watson Manualer

Watson B-1546 Manual

6 Februar 2025

Watson B-4238 Manual

5 Februar 2025

Watson DMW-BLK22 Manual

5 Februar 2025

5 Februar 2025

5 Februar 2025

5 Februar 2025

5 Februar 2025

2 Februar 2025

Watson C-VM-4E Manual

27 December 2024

Watson VM-293-SP Manual

27 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Simrad Active Imaging HD (Thru-Hull) Manual

14 Juni 2025

Garritan Harps Manual

14 Juni 2025

Marshall CV-H20-HF Manual

14 Juni 2025

Aiphone IXW-MAA Manual

14 Juni 2025

Rival HM-743 Manual

14 Juni 2025

Lutec Avony Manual

14 Juni 2025

Giordani G-SAFE & PLAY Manual

14 Juni 2025

Gourmia GAF799 Manual

14 Juni 2025

Arendo 307503 Manual

14 Juni 2025

Hughes & Kettner Tube 100 Manual

14 Juni 2025