Westinghouse 6103935 Manual

Westinghouse Ikke kategoriseret 6103935

Læs gratis den danske manual til Westinghouse 6103935 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Westinghouse 6103935, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Installation and Safety Instructions

Warning: Electrical shock can result in serious injury.

Read and follow instructions exactly as shown. If instructions are unclear, do not proceed. Contact a qualified electrician. Read

all instructions before beginning. Proper wiring is essential for safe operation of this fixture. When cutting or drilling into walls

or ceilings, do not damage electrical wiring, gas lines, or water lines. If any of the fixture or wiring components are damaged, do

not install fixture. Return to place of purchase.

If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his

service agent or a similar qualified person in order to avoid a hazard.

For indoor use only.

ASSEMBLY INSTRUCTIONS FOR INDOOR LIGHTING FIXTURE

Congratulations on your Westinghouse purchase. This fixture has been designed to give you many years of beauty

and service. For questions and comments, please visit www.westinghouselighting.eu/contact-us and www.

westinghouselighting.de/contact-us

NOTE: Carefully unpack fixture and parts. Make sure all parts are included before discarding any packing materials (see

figure 1).

MOUNTING AND WIRING INSTRUCTIONS

NOTE: Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to this

fixture.

1. Thread mounting screws (A) into the matching holes of mounting bar (B).

2. Place mounting bar (B) flush against ceiling at desired mounting location. Using outside mounting bar holes as a

guide, mark where pilot holes are to be drilled.

3. Inset two plastic anchors (D) into the pilot holes (for drywall ceiling).

4. Align outside mounting bar holes with plastic anchors (D) (If applicable). Secure mounting bar (B) into place using

wood screws (E).

5. If need adjusting length of fixture, loosen set screw (C) at the wire nut (F) and carefully insert/pull the cord (G) into/

from the canopy (H). Then, secure the set screw (C) at the desired wire location.

6. Make an electrical connection by loosening the terminal screws on the terminal block (M) and inserting the live,

neutral and ground terminals.

7. Tighten terminal screws. Make sure there are no stray wires.

8. Raise canopy (H) to ceiling, allowing mounting screw (A) to protrude through openings in canopy (H) and secure into

place with cap nuts (T).

9. Take off the retaining ring (J) from the socket (L). Install the shade (I) and secure with retaining ring (J).

10. Install lamp (K) (not supplied). (Please do not exceed the maximum capacity recommended on the socket).

CLEANING AND CARE

To clean, wipe fixture with soft cloth. Clean glass with mild soap. Spray from chemical cleaners can discolor the finish of

fixture. Do not use scouring pads, powders, steel wool or abrasive paper to clean this fixture.

NOTE FOR FIXTURES THAT ARE SOLID BRASS:

Your hand-crafted, solid brass lighting fixture has been coated with a durable, baked-on acrylic lacquer which gives

maximum protection against the weather. However, in time the brightness of the brass will tarnish, giving way to an

authentic old-world brass finish. To keep your solid brass fixture looking new for years to come, regularly apply a good

quality, non-abrasive car wax to all metal surfaces, giving the fixture an extra protective covering.

Meaning of crossed-out wheeled dustbin:

Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact you local

government for information regarding the collection systems available.

If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get

into the food chain, damaging your health and well-being.

When replacing old appliances with new ones, the retailer is legally obligated to take back your old appliance for disposal

at least free of charge.

Appliance specifications - TECHNICAL CHARACTERISTICS

Rated voltage 220-240V~

Rated frequency 50/60 Hz

Rated wattage E27 Max.40W

Protection class CLASS I

IP number IP20

Ambient temperature 40

Westinghouse Lighting, Philadelphia, PA 19154-1029, U.S.A.

www.westinghouselighting.com

, WESTINGHOUSE, and INNOVATION YOU CAN BE SURE OF

are trademarks of Westinghouse Electric Corporation.

Used under license by Westinghouse Lighting.

Made in China

W-604

052818

*NOT SUPPLIED

FIGURE 1.

Produkt Specifikationer

Mærke:	Westinghouse
Kategori:	Ikke kategoriseret
Model:	6103935

Har du brug for hjælp?

Hvis du har brug for hjælp til Westinghouse 6103935 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Westinghouse Manualer

Westinghouse W1.7WCAC Manual

10 Juli 2025

Westinghouse W16ADAC Manual

10 Juli 2025

Westinghouse W6TCAC Manual

9 Juli 2025

Westinghouse W14TCAC Manual

9 Juli 2025

Westinghouse WLB20V Manual

9 Juli 2025

Westinghouse W13ADAC Manual

9 Juli 2025

Westinghouse W18TCAC Manual

9 Juli 2025

Westinghouse WHTT20V Manual

21 Juni 2025

Westinghouse WSTT20V Manual

21 Juni 2025

Westinghouse WHKTPK14 Manual

13 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Advantech MIC-711-OX Manual

30 Juli 2025

Intellinet 713108 Manual

30 Juli 2025

Electro Harmonix EU12AC-1000 Manual

30 Juli 2025

Advantech PCIE-1753 Manual

30 Juli 2025

MXR Rockman X100 Manual

30 Juli 2025

MIPRO MI-909R Manual

30 Juli 2025

Advantech AMAX-4870 Manual

30 Juli 2025

Advantech IDK-1112P-50XGA2 Manual

30 Juli 2025

MIPRO MP-820 Manual

30 Juli 2025

Advantech ARES-12290 Manual

30 Juli 2025