Wharfedale Diamond 12 3D Manual

Wharfedale Højttaler Diamond 12 3D

Læs gratis den danske manual til Wharfedale Diamond 12 3D (14 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Wharfedale Diamond 12 3D, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/14

DIAMOND 12 Series

DIAMOND 12.0

DIAMOND 12.1

DIAMOND 12.2

DIAMOND 12.3

DIAMOND 12.4

DIAMOND 12.C

DIAMOND 12 3D SURROUND

User Manual

BRITAIN'S M FAMOUS LOUDS AKERSOST PE

Before installing this product read all these instructions!

Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.

Before making any connections, switch all the units in your system oﬀ at the mains.

Set the volume control at minimum when you switch on your system or change sources, and turn the level up gradually.

DO NOT use your ampliﬁer at full volume.

Ensure that all loudspeakers in the system are correctly wired.

DO NOT subject your loudspeakers to excessive cold, heat, humidity or sunlight.

Loudspeakers should not be placed directly facing other hi-ﬁ units, or share the same shelf or cabinet.

DO NOT place heavy objects on top of loudspeakers.

Some manufacturers forbid the placing of objects on top of their TV sets. Check your TV handbook before installing the speaker directly on your

TV set. Consult your TV dealer if you are in any doubt.

DO NOT connect speaker terminals to the mains supply.

DO NOT dismantle the loudspeaker. There are no user serviceable parts inside it and you will void the warranty by doing so.

Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, the apparatus has

been exposed to rain or moisture, does not operate normally, or has been dropped.

Caution: Changes or modiﬁcations not expressly approved by the manufacturer could void the user's authority to operate this device.

Unpacking Your Loudspeaker

DIAMOND 12 loudspeakers come in diﬀerent shapes and sizes. If you are unpacking a ﬂoor stander, please remember that these units are heavy.

We suggest that you have someone to assist you.

Lift the loudspeaker carefully out of the packing. DO NOT try and lift the loudspeaker using the protective bag.

Unpack the accessories carefully.

If there is any sign of damage or if the contents are incomplete, report this to your dealer as soon as possible.

Retain the packing for future safe transport of the product. If you dispose of the packing, do so with respect to any recycling provisions in your area.

Attaching the Spikes to Floorstanding Models – D12.3, D12.4

· Make sure you have plenty of unobstructed working space.

Place a soft cloth on the ﬂoor to protect the loudspeaker.

· Invert the loudspeaker onto the cloth.

· Thread a locknut onto each spike and loosely rub it up the thread.

· Thread the spikes into the spike inserts. Tighten them with ﬁnger tight.

· Invert the loudspeaker. Be careful not to damage the ﬂoor with the spikes.

Levelling the Loudspeakers

When the speaker is upright: You will probably ﬁnd that the speaker will wobble with one spike not contacting the ﬂoor. Adjust this spike until

With the aid of a spirit level move each spike in and out until the loudspeaker is level and sitting squarely on all four

Screw in rubber feet are provided for use on wood or stone ﬂoors etc. and should be attached in the same manner

as the spikes.