Whirlpool AWE 8729 Manual

Whirlpool Vaskemaskiner AWE 8729

Læs gratis den danske manual til Whirlpool AWE 8729 (2 sider) i kategorien Vaskemaskiner. Denne vejledning er vurderet som hjælpsom af 42 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 21.5 anmeldelser. Har du et spørgsmål om Whirlpool AWE 8729, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
GB
5019 312 10732
Programme
Tempe-
rature
Care
Labels
Max.
Load
kg
- for temperature selection, respect the manufacturer's recommendations on the care
label
Detergents and Additives Special options
Max.
Spin
Speed
rpm
Pre-
wash
Main
Wash
Softener Clean+ Easy
ironing
Pre-
wash
Start
delay
Intensive
rinse
Rinse
Hold
Variable
spin
White Cotton /
Antibacterial
70 - 95°C 5.5
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made
of cotton and linen.
At a temperature of 80ºC or more, this programme eliminates bacteria, ensuring
sanitization of your laundry. The bacteria removal efficiency has been tested following a
similar methodology to the NF EN 13697 standard of Nov. 2001.
Yes
3)
2)
max.
Cotton 20 - 60°C 5.5
Synthetics 20 - 60°C 3.0
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),
polyamide (Perlon, Nylon) or blends with cotton.
Yes
3)
2)
1000
1)
Daily load 20 - 60°C 3.0
Slightly to normally soiled textiles made of cotton and/or synthetics.
– Yes
–
–
2)
max.
Quick wash 15’ 20 - 30°C 3.0
Refreshes briefly worn outer clothing made of cotton, artificial fibers and blends with
cotton.
– Yes
– – –
2)
–
max.
Delicates 20 - 40°C 1.5
Curtains and delicate clothing, dresses, skirts, shirts and blouses.
Yes
3)
– –
2)
–
1000
1)
Jeans 20 - 60°C 5,5
Normally soiled cotton jeanswear and garments made of jeanslike material such as
trousers and jackets.
Yes
3)
– –
2)
–
max.
SuperEco 20 - 60°C 5.5
Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made
of cotton and/or linen.
Offers highest economy in energy consumption by prolonged wash duration. Ideal to be run
overnight to additionally profit from the more favourable energy rates. To avoid noise of
spinning at night, set spin speed to “0” and start spin programme in the morning, or define
programme start with “Start Delay” accordingly. Use with maximum load.
– Yes
– – –
2)
max.
Wool
20 - 40°C 1.0
Only woollens with a felt-free finish, labelled with the woolmark and identified as
machine washable.
This programme (40ºC) is tested and approved by The Woolmark Company for machine
washable wool.
– Yes
– – –
2)
–
1000
1)
Handwash 20 - 40°C 1.0
Textiles made of silk, linen, wool and viscose marked as “handwashable”.
This programme (40ºC) is tested and approved by The Woolmark Company for
handwashable wool.
– Yes
– – –
2)
–
400
1)
Rinse & Spin – – 5.5
Same as the last rinse and the final spin in the “Cotton” programme.
– –
– – –
max.
Spin – – 5.5
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
– – – – – –
– –
max.
Gentle spin – – 1.0
In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.
– – – – – –
– –
1000
1)
Drain – – –
Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.
– – – – – –
– – – –
A. Programme selector
B. “Temperature” button
C. Temperature display
D. “Variable spin” button
E. “Start delay” button
F. Time display
G. “Start/Pause” button
Whirlpool is a registered trademark of Whirlpool USA.
H. Programme sequence indicator
I. “Door open” indication
J. “Reset” button
This washing machine is equipped with
automatic safety functions which detect and
diagnose faults at an early stage and react
appropriately:
K. “Service” indication
L. “Water tap closed” indication
M. “Clean filter” indication
PROGRAMME CHART
A
B
H
F
E
G
C
D
J
I
K
: optional / Yes : dosing required
1)
For improved garment care, spin speed is restricted in these programmes.
2)
Do not use liquid detergent when activating the “Start delay”.
3)
Do not use liquid detergent for main wash if you have activated “Prewash” option.
The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for
the washing of Woolmark garments labelled as “machine wash” or “hand wash”provided that the garments are
washed according to the instructions on the garment label and those issued in this programme chart.
M0703
L
M
5019 312 10732
Programme
Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. Programme
Duration*
(hours : minutes)
White Cotton / Antibacterial 95 5.5 55** 1.70 1:55
Cotton*** 60 5.5 49 0.93 2:35
Cotton 40 5.5 53 0.55 2:00
Synthetics 60 3.0 54** 0.90 1:40
Synthetics 40 3.0 48 0.55 1:25
Daily load 40 3.0 43 0.48 1:00
Quick wash 15’ 30 3.0 30 0.15 0:15
Delicate 40 1.5 51 0.50 0:45
Jeans 40 5.5 73 0.55 2:14
SuperEco 60 5.5 49 0.73 4:00
Wool
40 1.0 53 0.50 0:45
Handwash 40 1.0 43 0.50 0:35
CONSUMPTION DATA
Whirlpool is a registered trademark of Whirlpool USA.
Add detergent as indicated an the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.
1. Turn the to the desiredprogramme selector
programme. The display shows the programme
duration in hours and minutes as well as the
predefined temperature. The “Start/Pause” button
flashes.
2. The can be altered by pressing thetemperature
“Temperature” button.
3. The indication lamp of the predefined spin speed
lights up; in case you want to set another spin speed,
press the “Variable spin” button.
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the
home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type
of wash.
* The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions
applicable at that time.
** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water
out.
*** Reference Programme for Energy Label.
ADD DETERGENTS, CLOSE THE LID AND
SELECT THE PROGRAMME
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp
lights to show the the lid can be opened. As long as a
wash programme is running, the lid remains locked and
must on no account be forced open. In case you have
an urgent need to open it during a running programme,
refer to “Cancel (Reset) a running programme before
the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused
by a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your “Instructions for Use”;
if the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply. Open
the water tap: if the indications still lights up, refer to the
“Troubleshooting Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the
drain hose is kinked or the filter must be cleaned: in the
latter case refer to the Instructions for Use (“Removing
the Filter”).
• Prolongs the programme by approx. 10 to 15 minutes.
• Appropriate for use of stain removers and bleaches
on oxygen basis. Chlorine or perborate bleaches
must not be used!
“Easy ironing” button
• Can be used together with “Cotton”, “Synthetics”
and “Daily load” programmes to make ironing easier.
• Increases the water quantity and the clothes are spun
very gently.
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time by
approximately 15 min.
• Do not use liquid detergent for the main wash when
activating the Prewash option.
“Intensive Rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very
soft water, washing baby linen and helping people
with allergies.
“Rinse Hold” button
• The laundry remains in the last rinse water without
progressing to the final spin cycle to avoid creasing
and prevent colours from changing.
• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and
“Delicates”.
• It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain only.
• If you select “Rinse Hold”, do not leave items to
soak for too long.
The programme stops to “Rinse hold” at theNote:
time the “Rinse hold” light in the programme
sequence indicator is on. The indication lamp next to
the “Start/Pause” button flashes.
Terminate the “Rinse Hold” option:
• Press the “Start/Pause” button; the programme
PROGRAMME START
Open the tap and press the “Start/Pause” button.
The indication lamp next to the “Start/Pause” button
lights up. The programme sequence indicator shows
the current programme phase, running from left to right
through Wash, Rinse, Spin/Drain.
The display shows the remaining programme time. Due
to variations in load and temperature of inlet water, the
remaining time is newly calculated in certain programme
phases. If this is the case, an animation appears on
the time display.
PROGRAMME END
• All the lights of the programme sequence indicator
are off, and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open lid and drum and unload the machine.
4. Leave the lid open for some time to allow the
interior of the machine to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the “Start/Pause” button to pause the
programme. The light flashes.
2. Select the new programme, temperature, any
options and another spin speed if you want.
3. Press the “Start/Pause” button again. The new
programme continues at the same position where
the previous programme was interrupted. Do not
add detergent for this programme.
CANCEL (RESET) A RUNNING PROGRAMME
The button cancels a programme before the “Reset”
end.
• Press the “Reset” button for at least 3 seconds;
“rES” appears on the display. Any existing water is
drained out before the lid can be opened.
SELECT ANY DESIRED OPTION
Push the button(s) of any option(s) desired - the
respective indication lights up.
When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.
“Clean+” button
• Choose this option if you use an in-wash additive for
stain removal (powder, for example “Vanish”) - it
will optimize the additive’s efficiency to get better
wash performance and stain removal.
• Selectable for programmes “Cotton” and
“Synthetics”; choose temperature of 30 or 40°C and
use with maximum load.
• Add an appropriate amount of in-wash additive for
stain removal (powder) to the main wash chamber,
together with your detergent (only use powder
detergent with this option). Respect the
manufacturer’s dosing instructions.
START DELAY
The “Start delay” button allows to run the machine at
the consumer's convenience, for example at night when
electricity is cheaper. Do not use liquid detergent when
activating the “Start delay”.
• Select programme, temperature and options.
• Press the “Start Delay” button to select the delay
time by 1 to 23 hours;
• Press the “Start/Pause” button.
The indication light over the “Start delay” button
flashes and the countdown of the delay time begins.
The dot between hours and minutes of the delay
time indicated flashes.
• The time delay indication disappears when the
programme starts and it is replaced by the remaining
programme time.
• Once having pressed the “Start/Pause” button,
the number of hours preselected can be reduced by
pressing and holding the “Start delay” button. From
1 hour on, the delay time can also be reduced in
steps of 10 minutes.
To cancel the “Start delay”
..before you press the “Start/Pause” button:
• Turn the programme selector to another position
or press the button.“Reset”
..after having pressed the “Start/Pause” button:
• Press the “Reset” button for at least 3 second - the
start delay time dissapears from the time display.
will terminate automatically with the final spin cycle
for the present wash programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain”
programme and press the “Start/Pause” button.
“Variable spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain during
the rinse. The water is drained out only.

Produkt Specifikationer

Mærke: Whirlpool
Kategori: Vaskemaskiner
Model: AWE 8729

Har du brug for hjælp?

Hvis du har brug for hjælp til Whirlpool AWE 8729 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Vaskemaskiner Whirlpool Manualer

Whirlpool

Whirlpool WAC 7200 Manual

13 Januar 2025
Whirlpool

Whirlpool WWDC 9614 Manual

12 Januar 2025
Whirlpool

Whirlpool W8 W846WR SPT Manual

12 Januar 2025
Whirlpool

Whirlpool AWT 4103 Manual

12 Januar 2025
Whirlpool

Whirlpool W7X W845WR SPT Manual

12 Januar 2025
Whirlpool

Whirlpool FFD 9448 SBSV EU Manual

12 Januar 2025
Whirlpool

Whirlpool FFB 8258 WV EE Manual

12 Januar 2025
Whirlpool

Whirlpool VAW558P Manual

15 Oktober 2024
Whirlpool

Whirlpool AWM 5063 Manual

14 Oktober 2024
Whirlpool

Whirlpool AWM 1203 Manual

13 Oktober 2024

Vaskemaskiner Manualer

Nyeste Vaskemaskiner Manualer

Bosch

Bosch WAQ28440EX Manual

15 Januar 2025
Siemens

Siemens WM14Q472DN Manual

15 Januar 2025
BEKO

BEKO WTV8740A1 Manual

15 Januar 2025
Hoover

Hoover DST 10166PG-80X Manual

15 Januar 2025
Asko

Asko 15605 Manual

15 Januar 2025
Hisense

Hisense WFPV9014EM Manual

15 Januar 2025
BEKO

BEKO WRE 6532 ZSBS Manual

14 Januar 2025
Miele

Miele V 9545 WPS Meteor Manual

14 Januar 2025
Zanussi

Zanussi ZWF 91483 WR LINDO 300 Manual

14 Januar 2025
Corbero

Corbero E-CLA5018W Manual

14 Januar 2025